Safety And Care - Oregon Scientific GR1001H User Manual

Symptom Check
Scale The scale
shows is over-
when loaded
weighing
Weight Retry
does not measuring
display
The
weight
shown
on the
on the
scale is
display
unevenly
distributed
or
unstable
You have
stepped
shown
on the
on the
scale too
display
early
The Scale
is not
shown
properly
on the
calibrated
display
GR101_E_V0.INDD 13
All manuals and user guides at all-guides.com
Remedy
The
maximum
weight
CARING FOR YOUR BODY FAT
is 150kg
MONITOR
(330 lb /
23st - 8lb).
To ensure you receive the maximum
Remove the
benefit from using this product, please
weight from
observe the following guidelines.
the scale.
Wait
until the
Reception
icon
appears.
Make sure
to remain
still and
place the
scale on a
flat surface.
Use the
carpet feet if
the ground
is carpeted
or uneven.
For guest
user, wait
until the
LCD is
blank. For
user with
saved
settings,
wait until
the display
shows
before
SAFETY PRECAUTIONS
stepping on.
Lift the
Please observe the following safety
Scale up,
precautions when setting up and using
then place it
your Body Fat Monitor.
back on the
floor to allow
for self-
calibration.
13

Safety and Care

Clean with a damp cloth. Do
not use abrasive or corrosive
cleaning agents.
Do not attempt to repair the
product yourself. Contact
the dealer or a qualified
repairman if the product
requires servicing.
Do not store the Scale in an
upright position.
Do not place objects on the
Scale or Remote Monitor.
Do not expose the product
to excessive force, dust,
temperature fluctuations, or
humidity.
Allow the Scale to settle for
at least 30 minutes whenever
there is a sudden change in
ambient environment (e.g.,
from an outdoor area to an
air conditioned room).
2005.8.15, 9:29 AM