Page 1
HE-160A Commercial Air Purifier OWNER’S MANUAL Please read all of the information provided in this owner’s manual before operating your new Commercial Air purifier.
Page 2
CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN ATTENTION CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVCE PERSONNEL. This “bolt of lightning” indicates that uninsulated material within your unit may cause an electrical shock.
Page 3
Utilizing controlled corona discharge ozone technology developed specifically to reduce odors and smoke in unoccupied spaces, ideal for treatment for homes, office, automobiles & boats and More! Model: HE-160A Europe AC 220-240V/50-60Hz Rated Voltage: USA/Japan AC 100-120V/50-60Hz Power Consumption:...
Page 4
Operating the Ozone Generator Air Purifier (Front View) Timer Control Knob Turn clockwise to set the timer for timed operation up to hours. Indicator Light Illuminates when unit is in operation.
Page 5
(Back View) Ozone Plate Insertion in plate receiver slots. Fuse Holder Houses removable fuse. (Spare fuse included, 2 amp, 0.79 inch in length) Power Cord 220~240 Volt grounded cord for Europe, 100-120 Volt for USA.
Page 6
The ozone generator is designed to remove odors in unoccupied spaces. The unit has a timer that will enable it to run for a maximum duration of 120 minutes. The timer will then shut the commercial air purifier off. You should allow 40 minutes before returning to the treated area.
Page 7
If you suspect a problem with your unit check the following: •Unit is plugged in properly. •Ceramic plates are clean and dry. •There are no cracks in plates and each plate is flush with back of unit. •It’s important that the Clean Air ozone generator be properly grounded to avoid potential shock.
Page 8
On the entire device 1 years from date of purchase except wearing parts, such as ceramic plates. (Ozone plate life: 6000 hours) Ozone plate are the consumables, no warranty, with normal damage.
Need help?
Do you have a question about the HE-160A and is the answer not in the manual?
Questions and answers