HENX H20LJ08 Operator's Manual
  1. Manuals
  2. Brands
  3. HENX Manuals
  4. Chainsaw
  5. H20LJ08
  6. Operator's manual

HENX H20LJ08 Operator's Manual

20-volt cordless chainsaw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
20-Volt Cordless Chain Saw
WARNING:
instructions carefully before operating this tool.
Improper use can cause serious or fatal injury.
Intend use
This tool is used for sawing branches and tree trunks.
THIS CHAIN SAW IS FOR USE BY TRAINED OPERATOR
ONLY. SEE INSTRUCTION HANDBOOK.
DO NOT USE THIS TOOL FOR TREE SERVICE.
H20LJ08
OPERATOR'S MANUAL
Read all safety rules and

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H20LJ08 and is the answer not in the manual?

Questions and answers

Related Manuals for HENX H20LJ08

Summary of Contents for HENX H20LJ08

  • Page 1 20-Volt Cordless Chain Saw H20LJ08 OPERATOR'S MANUAL WARNING: Read all safety rules and instructions carefully before operating this tool. Improper use can cause serious or fatal injury. Intend use This tool is used for sawing branches and tree trunks. THIS CHAIN SAW IS FOR USE BY TRAINED OPERATOR ONLY.

  • Page 2: Specification

    Specification Model H20LJ08 Speed 0-5m/s Bar size 8 inch Chain Pitch 3/8" Pitch count Oil volume 150mL Chain fastening mode Tool-less tension system Net weight 2.6kg Voltage DC18V 88.23 dB(A) A-weighted sound pressure level 3 dB(A) Uncertainty K 99.23 dB(A)

  • Page 3: General Power Tool Safety Warnings

    Wear protective gloves Wear protective clothing Wear safety footwear Wear eye protection Wear hearing protection Do not expose to rain Waste electrical products should In accordance with essential not be disposed of with applicable safety standards of household waste. Please European directives recycle where facilities exist.
  • Page 4 d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
  • Page 5 a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
  • Page 6 When transporting or storing chainsaws, always cover the guide plate. Proper operation of the chainsaw reduces the likelihood of accidental contact with the chain in motion. Lubricate, tensify chains and replace accessories according to instructions. Improper tensioning or lubrication of chains may result in chain rupture or increase the likelihood of rebound.
  • Page 7 Do not extend the tool too far and do not cut above the shoulder. This helps prevent the guide head from touching the object and gives better control of the tool in unexpected situations. Use only replacement guides and chains specified by the manufacturer Improper replacement guides and chains may cause chain breakage or rebound.
  • Page 8 16. Protect the battery pack from impacts, and don't open it. 17. Never discharge the battery pack completely and recharge occasionally if not used for a prolonged period. 18. When the battery pack is not used for long periods you should store it at room temperature (18°C to 24°C) with a battery charge level of 30 –...
  • Page 9 Tips for maintaining maximum battery life: Charge the battery pack before it runs out of power. When the battery is low, stop the tool and charge the battery. Do not recharge the fully charged battery pack. Overcharging will shorten the life of the battery.
  • Page 10 III. Function： Notice： Before adjusting or checking the function of the tool, always turn off the power of the tool and remove the battery pack. Install or remove the battery pack (as shown below) Notice： Be sure to turn off the power to the tool before installing or removing the battery pack. Hold the tool and battery tightly when installing or removing the battery pack.
  • Page 11 Before inserting the battery pack into the tool, be sure to check that the trigger and self-locking button spring back up. In order to avoid the user accidentally pull the trigger of the switch, this tool adopts the self-locking button! To start the tool: First, pull the front baffle from position (1) to position (1-1), then press the self-locking button and pull the trigger of the switch.

  • Page 12: Operation

    Step 3 :(figure 3) install the guide plate cover and tighten the guide plate and chain. ● Press (Figure 3-1) to align the small lug on the guide plate with the chassis slot, then close the guide plate cover; ● Press (Figure 3-2) to pretighten the guide plate clockwise before pressing the guide plate, then clockwise tighten the chain knob until it is about 3mm from the edge of the chain to the guide plate (As shown in Figure 3-3).Then tighten the guide plate and install...
  • Page 13 ①、Lubrication： ； When the tool is running, the chain is automatically lubricated Check the amount of remaining oil in the oil tank through the oil volume inspection window. When the amount of oil is lower than "min", the oil tank shall be refilled. Please remove the oil cap from the mouth of the oil tank, and the oil tank capacity is 120mL.After filling the tank, be sure to unscrew the cap provided on the chain saw.
  • Page 14 When cutting thick branches, first make a shallow cut in the lower part and then finish the cut from the upper part. If you try to cut off a thicker branch completely from the lower part, the branch may clamp and squeeze the chain in the cut.

  • Page 15: Maintenance

    Step 1: Place the chainsaw on a flat, exposed surface and ensure that no objects or obstacles are in contact with the guide plate and chain; Step 2: Release the chain brake by pulling the chain brake; Step 3: Start the chainsaw; Step 4: Push the chain kick brake handle toward the front of the saw.
  • Page 16 ● When the cutting edge has visible damage; ● When the saw swings from side to side in the wood, this condition is caused by uneven polishing of the chain or only one side is damaged. Polish the chain frequently to remove only a small amount of material at a time, usually with a file of two or three strokes.

  • Page 17: Warranty Coverage

    30 days from date of original purchase. HENX will replace, at its discretion, any part that is proven to be defective in materials or workmanship under normal use during the warranty period. Warranty replacements will be made without charge for parts or labor.

Table of Contents