Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ALTUS PRO Series
Summary of Contents for ALTUS PRO Series
- Page 1 ALTUS PRO SERIES Operating Manual...
- Page 2 IMPORTANT SAFEGUARDS When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: It is important that you read all the warning and precautions included in this manual because they are intended to keep you safe, prevent injury and avoid a situation that could result in damage to the device.
-
Page 3: Table Of Contents
Table of Contents INTRODUCTION..........4 General . -
Page 4: Introduction
• ANSI/AAMI ES60601-1 • CAN/CSA C22.2 NO.6060 -1 • IEC 60601-1-11 Intended Use The Altus Pro System is intended to reduce the incidence of pressure ulcers while optimizing patient comfort. Great for the following: • Individual homecare setting. • Long term care. -
Page 5: Package Content
PACKAGE CONTENTS Altus Pro Air Pump 10mmHg~ 25mmHg @ 1,000 LPM Low Air Loss Mattress 20 Snap type cells with low air loss Mattress Base Straps to bed frame with hose cover Cover Sheet Removable with waterfall zipper PRODUCT FUNCTIONS Pump —... -
Page 6: Pump
PRODUCT FUNCTIONS (cont.) Pump Item Description Power • Green on/off switch. • Power cord outlet . Inflation/CPR • Connection for the mattress Tube Connector Inflation/CPR Tube. Air Filter • Filters incoming air to ensure sufficient output Fuses • T6.3A (110V) fuse (x2) Hooks •... - Page 7 PRODUCT FUNCTIONS (cont.) Mattress — Cells Item Description Cells • 20 Snap type cells with low air loss holes Inflation/CPR Tube • To connect to the mattress to the air pump. Mattress — Base Item Description Loop Bridge • Holds the air cells in place. Inflation/CPR •...
-
Page 8: Installation
Hang the Altus Pro Pump over the frame or at the foot board of the bed. Make sure the pump is secured. - Page 9 For Patients: WARNING • DO NOT use another pump other than the Altus Pro Pump supplied with this mattress. It is dangerous to use a pump with pressure capacity over 120 mmHg. This may result in cell-puncture.
-
Page 10: Cpr Function
For Patients (cont.): AUTOFIRM: Will automatically inflate the mattress to the maximum level of 25 mmHg. Press the AUTOFIRM button again to return to the previous pressure level. After 30 minutes the pump will automatically return to the previous pressure level. Panel Lock: To lock/unlock the panel controls. -
Page 11: Pump
• Do not immerse or soak pump in water. • Check for external damage and move the pump to clean, flat and level work surface where you will be able to clean your Altus Pro Pump. • Place the pump on the work surface •... -
Page 12: Maintenance
Cover • Unbutton or Unzip the top cover and remove from the mattress. • Brush or wipe down all surfaces with soap and water before applying other disinfectant. • Cover needs to be immersed and soaked in disinfectant for the required incubation time. - Page 13 TECHNICAL DESCRIPTION The Altus Pro System Pump & Mattress is designed and manufactured to meet the most demanding environment. The specifications are listed below: America, Canada Equipment fulfills the requirement of the standard UL 1431. CE • Europe CE. Pump Specifications...
-
Page 14: Specifications
Mattress Specifications Item Specification GENERAL Mattress Size 203cm x 89cm x 25 cm (80" x 35" x 9.8") Mattress Weight 10kg (22 lbs.) Loading 200kg (441 lbs.) Connection with Pump Quick Release: I.D. 18.5mm Ulcer Stage Stage I & II & III & IV COVER Cover Size 203cm x 89cm x 12cm (80"... -
Page 15: Grounding Instructions
GROUNDING INSTRUCTIONS Three-Wire Plug Ground Instructions This product must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with an appropriate grounding plug. - Page 16 Distributed by: Roscoe Medical, Inc. Middleburg Heights, OH 44130 Ph: 800-376-7263 www.roscoemedical.com 42_APM-TLAL_02 ©2016 Printed in Taiwan...
Need help?
Do you have a question about the PRO Series and is the answer not in the manual?
Questions and answers