T&S B-0968 Installation And Maintenance Instructions Manual

T&S B-0968 Installation And Maintenance Instructions Manual

Atmospheric vacuum breakers

Advertisement

Quick Links

Limited One Year Warranty
T&S warrants to the original purchaser (other
than for purposes of resale) that such product is
free from defects in material and workmanship
for a period of one (1) year from the date of
purchase. During this one-year warranty period,
if the product is found to be defective, T&S shall,
at its options, repair and/or replace it. To obtain
warranty service, products must be returned
to...
T&S Brass and Bronze Works, Inc.
Attn: Warranty Repair Department
2 Saddleback Cove
Travelers Rest, SC 29690
Shipping, freight, insurance, and other
transportation charges of the product to T&S
and the return of repaired or replaced product
to the purchaser are the responsibility of the
purchaser. Repair and/or replacement shall be
made within a reasonable time after receipt by
T&S of the returned product. This warranty does
not cover Items which have received secondary
fi nishing or have been altered or modifi ed after
purchase, or for defects caused by physical
abuse to or misuse of the product, or shipment
of the products.
Any express warranty not provided herein, and
any remedy for Breach of Contract which might
arise, is hereby excluded and disclaimed. Any
implied warranties of merchantability or fi tness
for a particular purpose are limited to one year in
duration. Under no circumstances shall T&S be
liable for loss of use or any special consequential
costs, expenses or damages.
Some states do not allow limitations on how
long and implied warranty lasts or the exclusion
or limitation of incidental or consequential dam-
ages, so the above limitations or exclusions may
not apply to you. Specifi c rights under this war-
ranty and other rights vary from state to state.
P/N: 098-009549-45 Rev.6
Date: 01-08-08
Drawn: TEH
Checked: GEF 01-08-08
Approved: JHB 01-08-08
Installation and
Maintenance
Instructions
ATMOSPHERIC
VACUUM BREAKERS
B-0968 & B-0968-RK01 (3/8")
B-0969 & B-0969-RK01 (1/2")
Deutsch:
Installations- und
Wartungsanleitungen
Español:
la Instalación y las In-
strucciones de Man-
tenimiento
Français:
les Instructions
d'Installation et
d'Entretien

Advertisement

Table of Contents
loading

Summary of Contents for T&S B-0968

  • Page 1 B-0968 & B-0968-RK01 (3/8”) Any express warranty not provided herein, and any remedy for Breach of Contract which might B-0969 & B-0969-RK01 (1/2”) arise, is hereby excluded and disclaimed.
  • Page 2: Exploded View

    Exploded View 3/8" Vacuum Breaker 1/2" Vacuum Breaker Repair Kit Repair Kit B-0968-RK01 B-0969-RK01 B-0968 (3/8") B-0969 (1/2") Some items are listed for instructional purposes and may not be sold as separate parts.
  • Page 3: Part Number Guide

    Screws Nameplate Coverplate Insert Large O-Ring Small O-Ring Piston Body, Vacuum Breaker 3/8” (*) Indicates those items that are included in the B-0968-RK01 Vacuum Breaker Repair Kit B-0969 Vacuum Breaker Assemblies & Kit Screws Nameplate Coverplate Insert O-Ring Sealing Disk Piston Body, Vacuum Breaker 1/2”...
  • Page 4: General Instructions

    General Instructions Typical Installation: Note: Where the device is a separate unit, in the absence of a Single Vacuum Breaker Critical Installation Level (CIL) mark, the extreme bottom of the 1. Vacuum breaker must be installed no.8 casting should be used to with the supply connected to the bot- determine its installed position.
  • Page 5: Typical Installation

    General Instructions Typical Installation: B-0968-RK01 (Kit) Follow the instructions in the Single 3/8” Vacuum Breaker Vacuum Breaker section, step 1 thru step 5. Two typical T&S unit installations will look as follows: B-0929 Atmospheric Vacuum Breaker Assembly B-0969-RK01 (Kit) 1/2” Vacuum Breaker...
  • Page 6 Instruccione Generales Instalación Típica: Nota: Donde el aparato sea una unidad separada, en la ausencia Anti-sifón singular de la marca (CIL) que signifi ca 1. La válvula anti-sifón tiene que ser nivel crítico de instalación, el lado instalada, con la fuente surtidora en la extremo posterior de la parte No.8 parte posterior y la salida conectada a debe ser utilizado para determinar...
  • Page 7 1 al 5. 4. Reemplaze con partes nuevas del estuche de reparo. Dos instalaciones de unidades tipicas de T&S se verán como lo siguiente: B-0968-RK01 3/8” B-0929 Ensamblado De Válvula Anti-sifón Atmosférica B-0657 B-0969-RK01 1/2”...
  • Page 8: Instructions Générales

    Instructions Générales L’Installation Typique: Noter: Si le dispositif être un élé- ment séparé, avec l’absence d’une La Vanne-Caisse-Vide ligne du Niveau de L’Installation 1. La vanne-caisse-vide devoir Critique (CIL), le fond extrême de être installer avec l’alimentation la coulée de N°.8 devoir être utiliser brancher au fond et la sortie brancher pour déterminer sa position instal- à...
  • Page 9 Instructions Générales L’Installation Typique: B-0968-RK01 (Trousse) 0,96 cm Suivre les instructions dans la sec- tion de la vanne-caisse-vide, de l’étape 1 jusqu’ à l’étape 5. Deux installations typiques des élé- ments de T&S aller avoir l’aspect comme indiqué au-dessous: B-0929 la Vanne-Caisse- Vide Atmosphérique...
  • Page 10: Allgemeine Anleitungen

    Allgemeine Anleitungen Normale Installation: Anmerkung: Falls das Gerät eine sepa- Einfacher Vakuumschalter rate Einheit ist, ist, falls eine kritische Einbauebene fehlt (CIL), nach der 1. Bei der Installation des Vakuum- Installation der äußerste untere Rand schalters muß die Zuführung wie des Gußstückens Nr.8 zur Festlegung gezeigt mit dem unteren Ende, und seiner Lage zu verwenden.
  • Page 11 Allgemeine Anleitungen Normale Installation: B-0968-RK01 0,96 cm (Instandsetzungssatz) Die Anleitungen fur den einfachen Vakuumschalter, Schritt 1 bis 5, befolgen. Die Installation von zwei typischen T&S Einheiten sieht wie folgt aus: B-0929 Atmosphariche Vakuu- mechalicrvorrichtung B-0969-RK01 1/2” B-0657 Ausgußhahn- vorrichtung Instandsetzungssatz: 1.
  • Page 12 RELATED T&S BRASS PRODUCT LINE B-0965 Atmospheric Vacuum Breaker Assembly with Exposed Outlet B-0929 Atmospheric Back Flow Preventer B-0456 Atmospheric Vacuum Breaker Assembly T&S BRASS AND BRONZE WORKS, INC. A fi rm commitment to application-engineered plumbing products 2 Saddleback Cove, P.O. Box 1088, T &...
  • Page 13: Installation And Maintenance Instructions

    Installation and Maintenance Instructions Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one (1) year from the date of purchase. During this one-year warranty period, if the product is found to be defective, T&S shall, at its options, repair and/ or replace it.
  • Page 14 Exploded View * Some items are listed for instructional purposes and may not be sold as separate parts.
  • Page 15 Nipple, 3/8" X 4" Valve Body Asm, Cartridge (Cold) 005959-40 Handle, 4-Arm 002521-45 Grease Tube Nipple 002535-25 Asm, Vacuum Breaker 3/8" B-0968 Adapter, 3/8" MA 000545-25 Washer #27 010476-45 Asm, Flex S/S Hose B-0080-H Asm, Spray Head 005969-40 Asm, Wall Hook...
  • Page 16 Part Number Guide - con’t Nozzle Assembly Asm, Nozzle Swing Nozzle, 6” 059X Nozzle, 12” 062X Nozzle, 18” 065X Repair Kit*** 011643-45 "O"-Ring Sleeve, Swivel Swivel Piece Washer, Swivel Piece Nut, Swivel ***Repair kit includes items #16 and #17.
  • Page 17 General Instructions Nozzle Installation: Note: Nozzles should be installed first. See diagram below: If installing to an existing rigid pre- Enlarged View rinse unit or base faucet Faucet Installation: 1. Shut off water supply and drain lines. Remove no.21 from no.2. 1.
  • Page 18 General Instructions Installation of Control Valve: 1. Apply Teflon tape on threaded ends of no.21. Place no.21 into no.22, tighten by hand. Apply loctite on no.26, insert between no.22 and no.27, tighten no.27 with a wrench. 2. Apply Teflon tape or pipe joint compound to no.21 and place into no.11 and tighten by hand.
  • Page 19: Instrucciones Generales

    Instrucciones Generales Instalación de la boquilla: Nota: Las boquillas deben de ser instaladas primero. Vea el diagrama abajo: Vista Ampliada Si esta instalando a una unidad existente rígida de pre-enjuage o a la Instalación de la Canilla: base de una canilla 1.
  • Page 20 Instrucciones Generales Instalación de la Válvula de Control: 1. Aplique cinta de Teflon a los extremos con rosca de la parte No.21. Coloque la parte No.21 dentro de la parte No.22, y apriete a mano. Aplique Loctite en la parte No.26, y inserte dentro de las partes No.22 y No.27, Apriete la parte No.27 con una llave.
  • Page 21 Instructions Générales L’Installation De L’Ajutage: Noter: Les ajutages devoir être installer au début.Voir le diagramme ci-dessous: La Vue Aggrandie Si vous installer à l’ élément Prérinçage existant ou le robinet L’Installation Du Robinet : de la base 1. Percer (2) deux trous, avec un 1.Fermer la réserve de l’eau et diamètre de 1-1/4”...
  • Page 22 Instructions Générales Installation de soupape de commande: 1.Appliquer le ruban en Téflon ou le composé pour les tuyaux à l’extrémité de Nº.21 avec les filets. Mettre Nº.21 dans Nº.22 et resserrer par le main . Appliquer le “Loctite” sur Nº.26, insérer entre Nº.22 et Nº.27, resserrer Nº.27 avec une clef anglaise.
  • Page 23 Allgemeine Anleitungen Installation der Schwenkdüse: Hinweis: Schwenkdüsen sollten als erstes installiert werden. Sehen Sie dazu das Diagramm unten: Vergrößerte Ansicht Falls an einer bereits vorhandenen Installation des Vorspüleinheit oder einem einfachen Wasserhahnes: Wasserhahn installiert wird 1. Bohren Sie (2) zwei Löcher 1.
  • Page 24 Allgemeine Anleitungen Installation des Kontrollventils: 1. Tragen Sie Teflonband auf die Gewindeenden der Nr. 21 auf. Setzen Sie Nr. 21 in Nr. 22 und ziehen Sie dieses von Hand fest an. Loctite auf Nr. 26 auftragen und zwischen Nr. 22 und Nr. 27 einfügen, dann Nr. 27 mit einem Schraubenschlüssel fest anziehen.
  • Page 25 RELATED T&S BRASS PRODUCT LINE B-0175 Wall Mounted Faucet with 12” Swing Nozzle and Spray Unit B-0176 Deck Mounted Faucet with 12” Swing Nozzle and Spray Unit T&S BRASS AND BRONZE WORKS, INC. A firm commitment to application-engineered plumbing products 2 Saddleback Cove, P.O.

This manual is also suitable for:

B-0968-rk01B-0969B-0969-rk01

Table of Contents