Installation Guide AT-CAP-FC110 The Atlona Captivate™ AT-CAP-FC110 is an enterprise-grade ePTZ camera ideal for use in video conferencing, distance learning, and other applications in huddle rooms and small to medium-sized meeting spaces. This camera features a USB-C interface for video and audio. The CAP-FC110 can be used with the Omega™ Series, AT-USB-EX100-KIT, and OmniStream™, or interfaced directly with a PC.
Installation Guide AT-CAP-FC110 Front Panel Description Microphone IR Sensor Receives audio information and transmits it over the Receives commands from the included IR remote. USB cable. LED indicator Camera Lens This indicator will glow blue when the camera is in use. Receives visual information and transmits it over the USB cable.
Page 4
Installation Guide AT-CAP-FC110 Bottom and Side Panel Description USB Port 1/4” UNC Thread Connect the included USB cable from this USB 3.0 port Attach the camera to a tripod or other camera mount to the computer. using this hole.
Installation Guide AT-CAP-FC110 IR Remote Control Power press this button to confirm Press this button to turn on or the current selection. turn off the camera. If the OSD is not displayed, pressing this button will Menu return the viewing area to Press this button to display, the default position (all zoom exit, or return to a previous...
Installation Guide AT-CAP-FC110 Installation Open the hinge bracket and to mount the camera on top of the display. Connect the included USB cable from the USB Port on the camera to a USB 3.0 port on the computer. Once the camera is connected to the computer, the LED indicator on the front panel will be blue for 10 seconds, then turn off.
Installation Guide AT-CAP-FC110 Front Panel LED Indicator The LED indicator on the front panel of the unit provides basic information on the current status of the AT-CAP-FC110. Description Solid blue Unit is active and is streaming content. NOTE: Once the camera is initially connected to the computer, the LED indicator on the front panel will be blue for approximately 10 seconds, then turn off.
Installation Guide AT-CAP-FC110 Pan, Tilt, and Zoom The AT-CAP-FC110 supports EPTZ (Electronic Pan-Tilt-Zoom) control. When the camera is activated, the included IR remote is used to control these features. The illustrations below show the buttons used and their effect on the camera. TILT ZOOM FOCUS...
Page 9
Installation Guide AT-CAP-FC110 Auto Framing The AT-CAP-FC110 supports Auto Framing, which will center all participants in the camera frame. To enable this feature, press the F1 button on the included IR remote control. Auto Framing Inactive Auto Framing Active Auto Framing button FOCUS Preset buttons...
Installation Guide AT-CAP-FC110 Presets Up to three presets can be programmed using the number keys (1, 2, and 3) on the IR remote control. Press and hold the number key for more than three seconds to assign the current camera settings to a preset. Press and release the number key to recall a programmed preset.
Page 12
Installation Guide AT-CAP-FC110 Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/at-cap-fc110/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. International atlona.com 408.962.0515...