Download Print this page

Advertisement

Quick Links

C660 POWER DISTRIBUTION UNIT
Product Code: 42-689
CONTENTS
Section 1.0 Introduction
Section 2.0 Installation
Section 3.0 Models
Section 4.0 Connections
Section 5.0 Maintenace
Section 6.0 Technical Specification
1.0 INTRODUCTION
Safety
DO NOT remove any covers without first removing the mains supply
n
DO NOT operate the unit with any covers removed
n
ALWAYS replace any fuse with the same type and specification
n
This unit MUST always be earthed
n
To prevent fire or shock hazard, DO NOT expose this item to rain or moisture
n
This product is NOT designed for use in a domestic environment
n
To ensure safe operation of this unit and equipment connected to it, read the following and
take the appropriate action.
2.0 INSTALLATION
Installation and connection should only be carried out by a suitably qualified person and in accordance with
local wiring regulations.
EMO SYSTEMS
CROWTHER ROAD
WASHINGTON
NE38 0BW, UK
by Canford
v2 05/13
tel: +44 (0) 191 418 1055
info@emosystems.co.uk
www.emosystems.co.uk

Advertisement

loading

Summary of Contents for Canford EMO C660

  • Page 1 Canford C660 POWER DISTRIBUTION UNIT Product Code: 42-689 CONTENTS Section 1.0 Introduction Section 2.0 Installation Section 3.0 Models Section 4.0 Connections Section 5.0 Maintenace Section 6.0 Technical Specification 1.0 INTRODUCTION Safety DO NOT remove any covers without first removing the mains supply...
  • Page 2 3.0 MODEL These instructions apply to the following model: 32A 19” Rackmount Mains Distribution Panel C660 (42-689) 4.0 CONNECTIONS The input connector is 32Amp to BS4343, CEE17. It should be connected to an earthed, single-phase supply of nominally 220-240Vac. A protective device should be fitted at the supply source to ensure that the panel and the supply cables are adequately protected against over-current.

This manual is also suitable for:

42-689