Page 1
Canford C660 POWER DISTRIBUTION UNIT Product Code: 42-689 CONTENTS Section 1.0 Introduction Section 2.0 Installation Section 3.0 Models Section 4.0 Connections Section 5.0 Maintenace Section 6.0 Technical Specification 1.0 INTRODUCTION Safety DO NOT remove any covers without first removing the mains supply...
Page 2
3.0 MODEL These instructions apply to the following model: 32A 19” Rackmount Mains Distribution Panel C660 (42-689) 4.0 CONNECTIONS The input connector is 32Amp to BS4343, CEE17. It should be connected to an earthed, single-phase supply of nominally 220-240Vac. A protective device should be fitted at the supply source to ensure that the panel and the supply cables are adequately protected against over-current.