Ouellet KIT-OSR-DRD Instructions

180, 3 Avenue, L'Islet, Quebec, G0R 2C0, CANADA
rd
Tel.: (418) 247-3947, 1-800-463-7043 Fax: (418) 247-7801
www.ouellet.com
INSTRUCTIONS - KIT-OSR-DRD
THE INSTALLATION MUST BE EXECUTED BY A
QUALIFIED TECHNICIAN
RISK OF ELECTROCUTION
Read carefully these instructions before installation, operation of
the heater. Failure to adhere to the instructions could result in fire,
electric shock, serious personal injury, and death or property damage.
Review frequently for continuing safe operation and instruction of
future users, if necessary.
IMPORTANT
INSTRUCTIONS
Where applicable, installation must meet requirements of the
following codes:
- Canadian Electrical Code (CSA C22.1 Part 1)
- National Electrical Code (NFPA 70)
- Any other applicable local and/or national code
Where required by law, this product must be installed by a qualified
person.
ATTENTION: This product must be installed with a ground fault
circuit interrupter (GFCI).
Use only listed conduits, fittings and other components.
Use the self-regulating heating cable according to the ELSR-NA
instructions available on www.ouellet.com
SAVE THESE
INSTRUCTIONS
WARRANTY
Please refer to the product sheet at www.ouellet.com.
INS607-202112-00
Global view
Material included
D
E
A
Dimensions
Item Description
G H I
F
B
C
1679.6 mm
66 1/8"
611.3 mm
24 1/16"
355 mm
14"
A Half section of the central ring
B Blade
C Self-regulating heating cable (50 ft. / 15.24 m)
D Silicone glue for self-regulating heating cable
E End termination EL-ECN-EX
F Heat-shrinkable tubing
G Isolator for connection ELSR
H Cable gland
I Warning label
1504.8 mm
59 1/4"
Qty
2
6
1
2
1
1
1
1
1