Advertisement
Quick Links
Advertisement
Related Manuals for Sytech SY-PI250
Summary of Contents for Sytech SY-PI250
-
Page 2: General Warnings
Welcome Thank you for purchasing the new Mincer SY-PI250. In order to fully benefit from this product please read the following instructions carefully and store this user manual in a safe place for future reference. General warnings It is recommended that you carefully observe the precautions marked with the symbol ☞... - Page 3 ☞ ☞ ☞ ☞ This appliance should only be used for the purpose for which it was made: processing food. Any other use is considered improper and therefore dangerous. The manufacturer cannot be held responsible for any damage deriving from improper, incorrect, or unreasonable uses. The use of any electrical appliance implies observance of certain fundamental rules.
- Page 4 ☞ ☞ ☞ ☞ Installation must be performed according to the manufacturer’s instructions. Incorrect installation could cause damage to person, animals and things, for which the manufacturer cannot be held responsible. To avoid dangerous overheating, it is recommended that you unwind the electrical cord to its entire length and that you use the appliance as recommended in “Precautions”.
- Page 5 Parts of the SY-PI250 Description of the unit (Fig. A) (See Appendix) 1) Motor unit 2) Cover 2a) Cover lock/release 3) Blade group 4) Bowl 4a) Guide pin 5) Anti-slip base 6) Cord fastener Description of the controls (Fig. A) (See Appendix)
- Page 6 Safety Read these instructions carefully as they contain important information about safe installation, use and maintenance. Keep this manual with care for future reference. Before using the appliance, make sure it is in perfect working order. The motor block (1), the lid (2), the bowl (4) and the blade group (3) should not show any breaks or cracks.
- Page 7 o Never turn on the appliance when it is empty. To avoid injuring yourself, never put your finger in the bowl (4) near the blade. To remove residues of food from the container (4) remove the blade block (3) first. ☞...
-
Page 8: Operation
Operation When used for the first time, wash the bowl, the lid and the blade unit with hot water and normal washing up liquid. Rinse thoroughly and dry the parts before using them again. Before using, make sure that the bowl is not broken and that there are no cracks. - Page 9 ☞ ☞ ☞ ☞ The appliance will only operate if the motor block (1) placed on the lid (2) is pressed. o Do not introduce liquids in amounts greater than 100 cc. o Do not use particularly liquefied food (e.g. tomatoes) in quantities of more than 100 g. To remove the cover (2) press one of the two buttons (2a) and levering on the other lift the cover until it unhooks (fig.
-
Page 11: Maintenance And Cleaning
Maintenance and Cleaning • Before you proceed to cleaning, make sure the appliance is unplugged from the mains. • Separate all the parts before cleaning. Keep in mind that the blade is very sharp so handle it with care. • You can clean the blade, the container and the lid with water and soap (not in the washing machine). Be aware of drying carefully the blade after it is clean. -
Page 13: Declaration Of Conformity
Tel: 902 430 967 Fax: 91 8864285 NIF: B83254763 Manufacturing country: China Description: Mincer Sytech® SY-PI250 complies with the following directives: EMC Standard: Directive 2004/108/CE LFGB Standards ROHS Standard: 2011/65/EC Restriction of Hazardous Substances Signed: Ajeet Nebhwani Utamchandani Sole Administrator...
Need help?
Do you have a question about the SY-PI250 and is the answer not in the manual?
Questions and answers