OFF
ATTENTION | WARNING:
Le presse-étoupe ne peut en aucun cas être percé à l'aide d'un cutter ou autre.
Auquel cas le produit ne sera pas garanti.
The cable gland can not be drilled with a cutter box or anything else. In which
.
case the product will not be guaranteed
IDTOLIGHT Rue Saint-Laurent 3A 4970 Stavelot BELGIUM
www.idtolight.com
ATTENTION | WARNING:
- Le presse-étoupe est conçu pour étanchéifier le luminaire.
- Afin de raccorder le luminaire, il suffit de pousser le câble dans le trou central
du presse-étoupe. Cette action permet de percer sa membrane sans souci.
- Vérifier que le bord du joint du presse-étoupe soit bien placé et qu'il ne soit pas
rentré en partie dans le luminaire.
- The cable gland is designed to seal the luminaire.
- In order to connect the luminaire, simply push the cable into the central hole of
the cable gland. This action allows to drill its membrane without worry.
- Make sure that the edge of the cable gland seal is properly seated and that it is
not partially caught in the luminaire.
ON
OFF