Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Italinox GRN012
- Page 1 GAS GRIDDLE User Manual MODEL: GRN012 / GRN006 ★All mirror stainless steel construction ★Automatic thermostat ★High-efficient, easy operable &safe ★Durable and elegant design FOR THE PURPOSES OF THIS DOCUMENT THE FOLLOWING TERMS AND DEFINITIONS APPLY. I. Safety instructions...
- Page 2 IMPORTANT, PLEASE READ INSTRUCTIONS FULLY BEFORE USE THIS APPLIANCE IS ONLY FOR PROFESSIONAL USE AND MUST ONLY BEUSED BY QUALIFIED PEOPLE. Attention should be drawn to the fact that parts of this unit by necessity, will get VERY HOT, and will cause burns if touched accidentally. Therefore it is the responsibility of the supervisor or equivalent to provide SUITABLE PROTECTIVE CLOTHING for the user.
- Page 3 II. Technical Specification: Model Input Power Dimension Net Weight Plate GAS GRIDDLE 650MM GRN012 2800+2800 650*590*360 33.5 SMOOTH PLATE GAS GRIDDLE 650MM GRN006 2800+2800 650*590*360 SPLIT TOP -RIBBED AND SMOOTH Clean, Repair and Maintenance: III. 1 CLEAN After use for each time, please clean it with soft dry fabric, avoid using sharp metal, and strictly prohibit cleaning with water.
- Page 4 EXPLODE...
- Page 5 FOR THE PURPOSES OF THIS DICUMENT THE FOLLOWING TERMS AND DEFINITIONS APPLY. Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
- Page 6 1）. CEILING/SHELF 1500mm 2）. REAR 350mm 3）. SIDES 100mm It should be noted that the sides of the appliance will get hot and appliances with components sensitive to heat, should not be placed directly next to the unit. 4. Leg Installation see picture below. The leg channel is located on the package base. This channel must be installed when using the legs.
- Page 7 room in which they are installed. 11. During installation provision must be made for combustion air supply to the appliance, which enters the appliance through the base and rear of the appliance, this should not be blocked at any time. SEE TECHNICAL V.
Need help?
Do you have a question about the GRN012 and is the answer not in the manual?
Questions and answers