Page 2
1. Description This wireless room sensor is designed to sense room temperature and humidity in a heating zone. The measured data are transmitted wirelessly via local WiFi network to an IR controller. The room sensor can be powered either from AA batteries (1.5V) or via a C-type USB port (5V, 100 mA).
Page 3
When the configuration mode is active, the blue LED is lit. (It may take several seconds before it lights up.) Turn off the data connection on your smartphone, turn on Wifi, search for Regulus RSW 30 network, enter 12345678 as a password and connect to the sensor. (The phone usually reports that the Wi-Fi network has no Internet connection, which is OK.)
Page 4
Enter the IP address 192.168.4.1 in the address bar of your Internet browser and confirm it - this will take you to the device configuration web page. If the page is displayed in Czech, you can switch the language by clicking the menu button and selecting English.
Page 5
3.4. Connecting the room sensor via WiFi network to the IR controller In the „Device configuration“ section below, enter the zone number and IP address of the IR controller in the local network. If it is an IR14 or a newer model or RegulusBOX, check the option „automatic IR detection“...
Page 6
3.5. Assigning the room sensor to a heating zone in the IR controller In the selected heating zone, set the „WiFi room sensor“ (code no. 7) as the room temperature sensor and save the settings. │...
Page 7
4. IMPORTANT INFORMATION ON DISPOSAL IN COMPLIANCE WITH THE EUROPEAN DIRECTIVE 2002/96/ES Do not dispose of this product as unsorted municipal waste. Please dispose of this product by returning it to the point of sale or to your local municipal collection point for recycling. Respecting these rules will help to preserve, protect and improve the quality of the environment, protect human health and utilize natural resources prudently and...
Need help?
Do you have a question about the WiFi RSW 30 and is the answer not in the manual?
Questions and answers