OneAudio ONEwoofer.6+6 Quick Manual

Quick guide of ONEwoofer.6+6, ONEwoofer.8+8

Pairing your new ONEwoofer to transmitter

When you purchased a new ONEwoofer, you have to pair it to the transmitters (ONEdongle or/and ONEbox) before
use. Just plug-in power and your ONEwoofer will go to easy pairing mode. You can make pairing with 2 transmitters,
ONEdongla and ONEbox, by single step.
1. Turn on the ONEwoofer, it will automatically enter the pairing mode, Blue
and Red LED will toggle. You will hear "Connect me to transmitter"
2. You will hear "Please plug dongle in my USB port"
3. Plug the ONEdongle into the USB port, dongle LED will blink. If you don't
have ONEdongle, press any key will skip ONEdongle pairing and move to
next step
4. Pairing will takes 10-60s. When it is successful, you will hear "Paired with
stereo dongle"
5. Then, you will hear "Please remove dongle and power up ONEbox on my
Usb Port"
6. Power up ONEbox via the USB port. Blue and Red
LED of ONEbox will be toggled.
7. Pairing will takes 10-60s. When it is successful, you
will hear "Paired with micro box"
8. Pairing completed. ONEwoofer will restart
automatically.
* If you only have 1 transmitter (USB dongle / ONEbox) to pair, just plug your transmitter into ONEwoofer's USB
port, pairing will still proceed.
* If you miss the easy pairing, you can still process the normal pairing.
Menu operation