LG 42PX2RVA Service Manual page 6

HDMI
AUDIO INPUT
REMOTE
CONTROL
1 2
1. HDMI(DVI VIDEO) / AUDIO INPUT / RGB INPUT
Connect the monitor output socket of the PERSONAL COM-
PUTER, DVD or STB to this socket.
Note: If you want to use RGB/DVI audio, we strongly recom-
mend that you use the cable that has a core, or the EMI Filter
core along with separate cable.
2. REMOTE CONTROL
3. RS-232C INPUT(CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
4. COMPONENT INPUT
Connect DVD video outputs to Y, P
INPUT and audio outputs to Audio sockets of AUDIO INPUT.
AUDIO/VIDEO IN SOCKETS (AV4)
Connect the audio/video out sockets of external equipment to
these sockets.
S-VIDEO/AUDIO IN SOCKETS
Connect the S-VIDEO out socket of an VCR to the S-VIDEO
socket.
Connect the audio out sockets of the VCR to the audio sock-
ets as in AV4.
All manuals and user guides at all-guides.com
<Back Panel>
COMPONENT COMPONENT AUDIO AUDIO
L L R R
L L (MONO) (MONO) R R
S-VIDEO S-VIDEO VIDEO VIDEO AUDIO AUDIO
RGB INPUT AUDIO AUDIO
A A V4 V4
L L
V VARIABLE ARIABLE
AUDIO OUT AUDIO OUT
RS-232C INPUT
(CONTROL/SERVICE)
3 4 5
5. VARIABLE AUDIO OUTPUT
6. EURO SCART SOCKET
7. ANTENNA INPUT
8. POWER CORD SOCKET
, P of COMPONENT
B R
9. AUDIO/VIDEO INPUT (AV5)
- 6 -
A A V1 V1
Antenna
R R
A A V2 V2
A A V3 V3
6 7
Connect the euro scart socket of the VCR to these sockets.
Note:
a. If you want to use the EURO scart cable, you have to use
the signal shielded Euro scart cable.
b.
If the S-VIDEO(Y/C) signal is received through the Euro scart
socket 2 (AV 2), you must change to the
This set operates on an AC power. The voltage is indicated on
the Specifications page. Never attempt to operate the set on
DC power.
S-VIDEO/AUDIO IN SOCKETS
A A V5 V5
9
AC INPUT
8
S-Video 2
(Y/C) mode.