Download Print this page
Bestway 58628E Owner's Manual
Bestway 58628E Owner's Manual

Bestway 58628E Owner's Manual

Advertisement

Quick Links

58628E
www.bestwaycorp.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the 58628E and is the answer not in the manual?

Questions and answers

Summary of Contents for Bestway 58628E

  • Page 1 58628E www.bestwaycorp.com...
  • Page 2 OWNER’S MANUAL AQUASWEEPER WARNING WARNING! THIS IS NOT A TOY! - Do not let children use or play with the cleaner. Assemble and disassemble this product by adult only. - Do not allow swimming in the pool while the cleaner is in use. - TURN OFF THE PUMP before connecting cleaner to the pool.
  • Page 3 HOW TO CONNECT YOUR AUTOMATIC POOL CLEANER TO POOL NOTE: Turn filtration OFF before connecting the Automatic Pool Cleaner to your pool. The 2 connectors (F ) and Connection Hose A enables the Automatic Pool Cleaner to fit most brands of Above Ground Pools in the market.
  • Page 4 Completely immerse the hoses and the Automatic Pool Cleaner to let air escape, then connect the open end if the hose to the pool (Fig.2). Fig. 2 Fig. 3 (a) Fig. 3 (b) Pump Pump NOTE: If your pool has two suction lines, then one suction line should be covered before using the cleaner. (Fig.3) The water hose should be in a C shape, and the product should be placed into the water in the direction of the water hose, as follows.
  • Page 5: Sand Filter

    Pressure Regulator Adjustment Unscrew the valve, lock nut, and adjust the Z-type valve up and down to ensure that the water hose is on the horizontal surface (as shown on the right), and tighten the lock nut of the valve. WARNING! TURN OFF THE PUMP BEFORE ADJUSTING THE PRESSURE REGULATOR.
  • Page 6: How To Clean

    HOSE WEIGHT APPLICATION Ideally, the bottom surface of the cleaner should rest flat on the pool bottom. First, assemble the hose weight on the first long white hose (A) from the cleaner. If the cleaner leans forward, move the hose weight along the long white hose towards the cleaner. If the cleaner leans backward, move the hose weight to the next long white hose.
  • Page 7: Troubleshooting

    TROUBLE SHOOTING WARNING: Turn off the pump before performing cleaning, maintenance and troubleshooting. The cleaner stops operating for the following reason: Problem Solution Stop the filter pump or sand filter, purge the air and start again. - Air inside the pump For assistance, please visit the support section on our website, www.bestwaycorp.com.
  • Page 8 Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia Tel: Australia: (+61) 29 0371 388; New Zealand: 0800 142 101 Distributed in United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL Exported by/Exporté par/Exportado por/Exportiert von/Esportato da Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited...