Table of Contents
Advertisement
Switching on
Turn on the tap if it is turned off.
Open the door.
Touch the sensor.
Selecting a programme
Touch the sensor for the required
programme.
Further programmes can be selected
under .
Selecting programme options (if
required)
You can select and deselect
programme options via the relevant
sensors and the display.
The selected programme option will
remain active for that particular
programme until the setting is changed.
Touch the sensor for the programme
option you want.
The relevant sensor will light up brightly.
Activating the timer (if required)
Touch the sensor.
Select the function you want using
the sensors and confirm with
OK.
Enter the required time for the timer
using the sensors and confirm
with OK.
Starting a programme
Start the programme by closing the
door.
Programme end - Switching off
At the end of a programme, the optical
in-operation indicator light will flash
slowly with the door shut. The signal
tones might also sound.
The programme has finished when
appears in the display and
Finished
the door has opened slightly (if
applicable).
The drying fan may continue to run for
a few minutes at the end of the
programme.
Open the door.
The dishwasher can be switched off
at any time using the sensor.
Confirm the query
with OK.
Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate
worktops when you open the door at
the end of the programme if the fan
is no longer running.
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, make
sure that you open the door fully.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot. Allow the
dishes to cool until they are comfortable
enough to handle before unloading
them.
Switch appliance off
Advertisement
Table of Contents
