Advertisement
PRODUCT NAME: Torano Console
ITEM NUMBER: SF090
ASSEMBLED DIMENSIONS : 36"H x 72"W x 17 1/2"D
LEVELERS: Console is equipped with Rotary Levelers installed under each Leg. If necessary, adjust-
ments may be made by carefully lifting applicable corner and turning Leveler clockwise/counterclock-
wise.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 8-18-2021
-Two person assembly suggested.
Ltr.
Qty.
2
A
1
B
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alcohol based
cleaners or polishers. Promptly remove spills.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
REQUIRED TOOLS:
Phillips Screwdriver
Hardware/Components Included
Serious or fatal crushing injuries can occur from a furniture tip-over
LEVELER
Wall Anchoring
(Anti-tip) Kit
See page 2
Console
WARNING
Tip-Over Hazard
ANCHORING HARDWARE INCLUDED
Prevent tipping accidents. Anchor your furniture.
MADE IN INDIA
Page 1 of 2
Advertisement
Table of Contents
Summary of Contents for Ballard Designs Torano SF090
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Torano Console ITEM NUMBER: SF090 ASSEMBLED DIMENSIONS : 36”H x 72”W x 17 1/2”D REQUIRED TOOLS: Phillips Screwdriver -Two person assembly suggested. Ltr. Qty. Hardware/Components Included Wall Anchoring (Anti-tip) Kit See page 2 Console WARNING Tip-Over Hazard...
- Page 2 WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Small Screw WARNING Large Screw Tip-Over Hazard Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt 1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit. 2.
Need help?
Do you have a question about the Torano SF090 and is the answer not in the manual?
Questions and answers