A-Tach Mounts 20016 Manual

A-Tach # 20016
Designed for: RAM Trucks 2019 - 20__
WARNING: Please hold the vehicle mount and holster over the place where the solution attaches to the
dash BEFORE securely attaching it to the vehicle. This will insure you like the fit and location of the solution.
(1) The holster comes with a two part securing strap
for the hand gun. Place your hand gun into the
holster. Then snap the two parts of the strap
together and place the strap in a position that will
secure the hand gun into the holster.
NOTICE: A-Tach Mounts will not be responsible for
any damage to the vehicle due to the installation
and/or use of the product. The product has been
tested to fit securely to the listed vehicles.
Instructions are provided for your convenience.
You are responsible for the use of the product and
to determine if you have the skill to attach the
product without causing damage to your vehicle or
the product.
Read all instructions and view the photos before
attaching this product.
(2) Slide the hooked parts of the Velcro on the
strap into the slots on the sides of the holster.
Using the included blue card stock will help. The
strap is adjustable by the distance the straps are
inserted into the slots. Be sure to align the hooked
parts of the Velcro with the mesh parts to create a
secure connection.
(3) Consider if you want the holster for right hand
use or left hand use. Attach the holster to the
mount by inserting the clip arm on the mount
through the clip slot on the side of the holster.
Photo is for illustration and might not show the
actual mount.
A-Tach
Mobile Device Mounts