Related Manuals for FIAMA SIMPLEX-E Series
Summary of Contents for FIAMA SIMPLEX-E Series
- Page 1 SIMPLEX-E Display for linear measurement USER’S MANUAL AND MAINTENANCE ELECTRONIC DISPLAY FOR LINEAR MEASUREMENT WITH BATTERY-OPERATED Data: 13/01/16 file: Simplex_ing.doc pag 1/8...
-
Page 2: Environmental Conditions
Do not use hydrocarbon solvents (petrol, diluents, etc.): the using of these products could affect the proper functioning of the instrument. Reparations should be done only and exclusively at the FIAMA technical assistance centre. Calibrations and tests It is advisable to calibrate the instrument periodically, once every working year. -
Page 3: Installation
SIMPLEX-E Display for linear measurement Installation Before installing the instrument, read the following warnings: a) Connect the instrument strictly following the instructions of the manual. b) It is the responsibility of the user to check, before using, the correct settings of the parameters of the instrument to avoid damage to persons or things. - Page 4 SIMPLEX-E Display for linear measurement Count direction Set out the count direction of the display, range allowed 0 or 1. Setting 0 the value on the display increases, turning the hollow shaft clockwise. Setting 1 the value on the display decreases, turning the hollow shaft clockwise. Keys opening mode This parameter programmes the functions linked to the keys.
- Page 5 SIMPLEX-E Display for linear measurement Adjusting of quota After the assembling of instrument on the machine and setting of all parameters, to visualize on the display the correct measure it is necessary to carry out the reset or preset of quota. Position the transducer in point where is known exactly the correct measure to display (ex.
- Page 6 SIMPLEX-E Display for linear measurement Meaning of the symbols on the display Indicator of flat battery: begins to blink when the level of loading goes under a certain value and when it keeps switched on its necessary to change the batteries within 1 month. Indicator of absolute quota Indicator of relative quota Indicator of mm...
-
Page 7: Overall Dimensions
SIMPLEX-E Display for linear measurement Overall dimensions 2.5 6 12.5 Fori Ø4,2 di bloccaggio strumento Bores Ø4,2 for instrument fixing Bohrungen Ø4,2 für Gerät Befestigung Limitatori di corsa Banda magnetica Stroke limiting device Magnetic tape Hubbegrenzer Magnet Band Guida scorrevole Sliding guidance Führungsschiene Rialzo per guida... -
Page 8: Specifications
Tel. (+39) 0521.672.341 - Fax. (+39) 0521.672.537 – e-mail: info@fiama.it - www.fiama.it FIAMA Srl is not responsible for any damage to persons or things caused by tampering and wrong use and in any case that are not consistent with the features of the instrument.