Recording A Tv Program - Toshiba D-R2SU Owner's Manual

Recording
DVD-RAM DVD-RW DVD-R

Recording a TV program

To record a TV program currently being broadcast, follow the procedures of this chapter.
Preparation
• Load a DVD-RAM/R/RW disc into the recorder.
- Load a disc which has sufficient space available to record the program.
- Make sure the loaded disc is not write-protected.
• If you record on a DVD-R or a DVD-RW disc, set "DVD compatible mode" (
R/RW recording, "Off" setting is regarded as "Main."
• If you record on a DVD-R or DVD-RW disc, set "Aspect ratio(Video mode)" (
sources.
OPEN/CLOSE
DVD
TOP MENU MENU RETURN
ANGLE SUBTITLE AUDIO CHANNEL
TIMESLIP
INSTANT REPLAY
EASY
NAVI
REC MENU EDIT MENU
LIBRARY
ENTER
PAUSE STOP
REC
REMAIN DISPLAY TIME BAR CHP DIVIDE
DIMMER FL SELECT ZOOM
TV
TV/VIDEO CHANNEL VOLUME
32
1
Press INPUT SELECT repeatedly to select a
recording source.
INPUT SELECT
INSTANT SKIP
CONTENT MENU
PLAY
QUICK MENU
P in P
PROGRESSIVE
INPUT SELECT
page 134) to "Main" or "SAP." In DVD-
page 134) according to recording
Each time you press the button, the indicator alternates.
Ch-: To record a TV program or cable program with
recorder tuner.
L-1: To record a source connected to the INPUT1
jacks on the rear panel (
L-2: To record a source connected to the INPUT2
jacks on the front panel (
L-3: To record a source connected to the INPUT3
jacks on the rear panel (
To record a program from a connected set top box, set
the channel to "Ch-3", "Ch-4", "L-1" or "L-3" according to
the connection (the same as
"INSTALLATION GUIDE").
If the connection of the supplied IR control cable and
the necessary settings are all done, you can select
channels of the connected set top box with the
recorder's remote control.
If not, select the proper channel on the set top box to
receive the desired program.
page 36).
page 36).
page 36).
page 40 on