McIntosh LB200 Operation Manual

Integrated Amplifier or Preamplifier
The AC/DC Power Adapter supplied
with the LB200 McIntosh Light Box
Connect to the DC IN
5V connector on the
Rear Panel of the LB200
McIntosh Light Box
Connect to a live AC outlet (always
On) using the supplied AC Power Cord.
Refer to information on the power
supply to determine the correct voltage
McINTOSH LB200 OPERATION GUIDE
Connection Diagram and Light Box Operation
Connect to another
McIntosh Component
Power Control or
Trigger Input Jack
Connect the supplied
AC/DC Power Adapter
DC Output Connnector
PC IN (Power Control/Trigger) receives turn-
on signals from a McIntosh component and PC
OUT (Power Control/Trigger) sends turn-on
signals on to another McIntosh Component
PC IN
PC OUT
ON
OFF/REMOTE
DC IN 5V
Use Only The
Power Adapter Provided
A059764 LB200 REAR VIEW 4/29/22 JM
Power On
Place the ON-OFF/REMOTE Power Control Switch in the ON
position or, if the PC IN Jack is connected to the Power Control/
Trigger Jack from a McIntosh Component, place the switch in the
OFF/REMOTE position.
Power Off
Place the ON-OFF/REMOTE Power Control Switch in the OFF/
REMOTE position or, if the PC IN Jack is connected to the
Power Control/Trigger Jack from a McIntosh Component, switch
power Off on the connected McIntosh Component.
LB200 LIGHT BOX
SERIAL
McINTOSH LABORATORY, INC., BINGHAMTON, NY
NUMBER
HANDCRAFTED IN USA WITH US AND IMPORTED PARTS