Viltrox EF-NEX Mount Instructions

Mount Adapter EF-NEX
Instructions
Thank you for purchasing a Viltrox product.
The Lens Mount Adapter EF-NEX is designed to allow Sony E- ount
series lenes to be used with E-mount lens compatible interchangeable-lens
digital cameras lenses.Before using this adapter, please make sure that
the camera and the lens is compatible.
Nomenclature
Attentions
◎
This adapter is connected to the lens and also affect the performance
of the lens.
1. If the adapter cannot work on NEX series cameras,Please updated the
camera to 04 or up version.
2. After set the adapter on the EF-NEX lens,Be remember to set the M
mode change to A mode.Please restart the camera if it cannot Auto focus.
3. It will not affect the performance of lens after seting the adapter ring on the lens.
4. Please use the switch on the lens to set the lens function. If the settings
in the camera menu and set on the lens, and is subject to the settings on the lens.
5. When you use the lens is much heavier than the camera, be sure to move
the camera and shoot holding the lens. Will increase the minimum focusing
distance of the lens adapter is connected, so the maximum magnification
and field of view may change.
User manual
m
EF Lens mount index
EF-S Lens mount index
Camera lens mount index
Lens release lever
Contacts (camera side)
Contacts (lens side)
Tripod mount socket
Certification/
Regulatory logos
10
N118
Tripod mount screw
Tripod mount knob
Tripod socket
Mounting and Detaching the Adapter
① ②
④
◎ Mounting Procedures
1.Attach the EF lens to the EF mount side of the adapter.
Insert the lens into the adapter by aligning the mount index found on the EF
lens (red circle) with the same mark found on the adapter,and turn the EF
lens clockwise until you hear a click.(fig.
When attaching an EF-S mount index marks (white squares) and turn the
②
lens clockwise.(fig. )
2.Mount the adapter to the camera.
Insert the adapter into the camera by aligning the Sony E-mount lens mount
index found on the adapter (white circle) with the same mark found on the camera,
and turn the adapter counter clockwise until you hear a click.(fig.
◎
Detaching Procedures
1. Turn the camera OFF,and detach teh adapter from the camera while
the EF lens is still attached to it.
Turn the adapter counter clockwise the while pressing the camera's lens
④
release button.(fig. )
Detach the adapter once it has stopped turning.
2. Detach the EF lens from the adapter.
Turn the EF lens counter clockwise while pushing the lens release lever
⑤
found on the adapter.(fig. )
Detach the EF lens once it has stopped turning.
3.Precautions when using this adapter with a tripod
When shooting with a tripod,do not use the camera's tripod mount socket
while the adapter is attached.Be sure to use the tripod mount included
with the adapter.
Attaching the tripod mount
1.Attach the included tripod mount to the adapter by firmly turning the
tripod mount knob.
Please make sure that the tripod mount is facing in the correct direction in
relation to the adapter.
2. Attach the tripod using the tripod mount socket.
Securely attach the tripod while firmly hoding the adapter.
When using a tripod with EF lenses that are equipped with a tripod mount, such as super
telephoto lenses,please be sure to use it to mount the lens to the tripod.
Specifications
Compatible lenses
EF series lenses
Compatible cameras
NEX series camera
Front mount Canon EF mount compliant
Sony E-mount compliant
Rear mount
Tripod Socket
Cu 1/4 × 1
Max.Diameter and Length
66.6
Weight Approx. 125 g
Front Cap Camera Cover
Lens Dust Cap
Rear Cap
The size and weight listed are for the adapter only.All data listed is measured according to Canon standards.
Specifications subject to change without notice.For more information, please visit www.viltrox.com
JYC Technology(HK)Co.,Ltd.
③
⑤
①
)
③
)
× 26 mm