Operating The Television; Auto Search; Manual Search - Bratz SMB-680 Instruction Manual

OPERATING THE TELEVISION

Connect your TV aerial to the aerial input socket located on the back of the TV.
Push the Main Power Switch, Power Indicator will be illuminated. After a few seconds the TV
screen will light up and will show interference on the screen. The TV will require tuning into the
available TV stations in your area.
Pre-setting the TV stations into the M emory
(Note: Preset tuning can only be carried out in TV Mode)
Press MENU three times on the remote handset, the TV
screen will show TUNE mode as FIG.1

AUTO SEARCH

1. Press the Navigation button
mode as shown in FIG. 2
2. Press the Navigation button
scanning process starting from VHF to UHF
and the TV stations will automatic store into the memory as
shown in FIG. 3
• W hen scanning is completed, the set will tune to lowest
programme and show lowest programme number on the
screen.
• To stop auto search function to press MENU button.
• To exit the TUNE mode, press the MENU button.

MANUAL SEARCH

1. Press the Navigation
Then press the Navigation
Programme number.
2. Press the Navigation
SEARCH mode and press the Navigation
to start the search up the band. The TV screen will show
the tuning and when the first station received is located,
the tuning will stop and be stored automatically. Then press
the Navigation
the next TV station, as shown in FIG.4 and FIG.5.
3. Press the MENU button to exit the manual.
to select the AUTO SEARCH
to start the automatic
/ button to select the PROGRAMME.
/ button to select the desired
/ button to select the MANUAL
/ button to recommence seek search to
/ button
7
TUNE
C SYSTEM
S SYSTEM
PROGRAM
AUTO SEARCH
MANUAL SEARCH
/ :SELECT
/ ADJUST
FIG .1
TUNE
C SYSTEM
S SYSTEM
PROGRAM
AUTO SEARCH
MANUAL SEARCH
/ :SELECT
/ :ADJUST
FIG .2
AUTO SEARCH
PROGRAM
BAND
FIG .3
TUNE
C SYSTEM
S S Y S T E M
PROGRAM
AUTO SEARCH
MANUAL SEARCH
/ :SELECT
/ :ADJUST
FIG .4
MANUAL SEARCH
PROGRAM
BAND
FIG .5
PAL
BG
1
PAL
BG
1
1
VHF L
PAL
BG
1
1
VHF L