PROGRAM PLAY
You can store a program selection of up to 20 tracks from a CD
or 99 tracks from an MP3/WMA compilation to play in your
preferred sequence.
To set a program:
•
Load a CD or MP3/WMA compilation and wait for it to
read.
Play will begin automatically.
STOP button to stop playback (programming is
•
Press the
only possible when stopped).
•
Press the
MODE button.
The display will show the PROG symbol and P01 flashing (the
position of this track in the program).
•
If you are playing a MP3/WMA compilation of albums,
you can optionally change the album number to program
by pressing the ALBUM button repeatedly (skip this step
if you are programming a CD).
•
Select the track number you want to program by pressing
the SKIP+ or SKIP- button.
•
To save this track into the program sequence, press the
MODE button.
The display will show 02 flashing, indicating that you are now
entering the second track in the program sequence.
•
Repeat the previous two steps (three steps if you want to
change album) until you have stored all the tracks in the
program sequence.
Playing the program:
•
Press the
PLAY/PAUSE button to start the program
playing.
The PROG symbol will remain on and the program will begin
to play.
Selecting tracks:
•
You can navigate through the tracks stored in the
program by pressing the SKIP+ or SKIP- button.
Clearing the program:
•
Press the
STOP button twice.
The PROG symbol will switch off.
9