MCP Available
When no MCP is available it might occur that some
functions are in an undesirable position, for example, a lock
on the upper part of the OCP. To prevent this happening,
set the Base Station menu item System \ MCP Available to
No when an MCP is not available.
The functions affected by this setting and their state are as
follows (if the item value is set to MCP Available = No):
Variable black stretch (Yes/No)
Variable gamma (Yes/No)
Variable Flare (Yes/No)
Saturation (Yes/No)
White clipper (Yes/No)
Knee slope (Yes/No)
Knee point (Yes/No)
Iris(Normal/Reverse)
OCP lock (Upper/Total)
Intercom (System/Isolate)
Audio (External/MCP)
Aspect Ratio (External/MCP)
Aspect Ratio (4:3/16:9)
Autolight (Yes/No)
2-22
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Normal
Total
System
External
External
4:3
Yes
User's Guide LDK 4502 - HDTV Camera Base Station
Installation