CHAPTER 2. Installation of RRH-C2A
2.5 Connecting cable between RRH and Antenna
2.5.1 Connecting Feeder Line
Follows the steps below to connect the feeder line.
Caution for connecting Feeder Line Connector
When connecting the feeder line between RRH-C2A RF port and RF antenna,
each port and the feeder line connector should be secured by 200 kgf.cm torque
to minimize influence of PIMD.
2-10
RF Antenna
RRH-C2A
Figure 2.7 RRH-C2A Feeder Line Connection Diagram
'B'
'A'
© SAMSUNG Electronics Co., Ltd.