Narvitech HD60 Pro Quick Manual

NS110
HD60 Pro
Quick Guide
© 2021 Narvitech Corp.
How to live streaming / record on PC/Laptop
First, connect NS110 to a camera
1
via HDMI cable.
*Different model camera has different HDMI port configuration,
please prepare the HMDI cable accordingly.
After set up , open software(Screen Recorder 4,
3
OBS ,etc) and start live streaming/recording
immediately!
English 繁體中文
Then, connect NS110 to a PC/Laptop
2
via USB cable, switch NS110 to PC
mode.
A B
HDMI
MicroUSB
Mode
F1 SD PC
LED indicator status
Green
Ready to record
Green flashing
Recording (PC/SD mode)
Red
No Video
Red flashing
SD card not inserted (SD card mode)
Blue SD card reader mode
long press recording button in SD card mode
when connected to PC
White flashing
Firmware Update
Package Contents
NS110
Parts and Ports
1
How to record the screen on camera?
First, setup a camera on a tripod, connect
1
HDMI cable to the camera.
*Different model camera has different HDMI port configuration,
please prepare the HMDI cable accordingly.
Secure NS110 and power bank on to the
3
tripod (Velcro tape is recommended),
press the record button to start recording !
(press again to stop recording)
*More information about SD card recording
can be found in the Narvitech official
website > Support
3
USB 2.0 Micro to Type A HDMI Cable
Quick Guide Cyberlink Key
1
2 Record Button
2
Micro SD Card Slot
3
Snapshot
4
Mode
F1 SD PC
4
Mode Switch (SD/PC)
3 5
5
HDMI In Port
6
6
HDMI
Micro USB Power Input
MicroUSB
Connect NS110 to the camera via HDMI
2
cable, power up NS110 with a power
bank, then switch NS110 to SD card
mode and insert a SD card.
A
HDMI
MicroUSB
C
Mode
F1 SD PC
LED indicator status
Green
Green flashing
Red
Red flashing
SD card not inserted (SD card mode)
Blue
White flashing
2
B
Ready to record
Recording (PC/SD mode)
No Video
SD card reader mode
long press recording button in SD card mode
when connected to PC
Firmware Update
4