Table of Contents
Advertisement
Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the
aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on
Connect the mains plug and switch the TV into standby
using the rear Power button. Press any numbered or
standby button on the remote control, the Local Op-
tions screen will appear. This screen will appear the
first time that the television is switched on and each
time the television is reset.
LOCAL OPTIONS
Select your Country by using
to move down through the list.
Set your Language and Audio Language out of the
options available.
You can also set Subtitles OFF, as well as specifying
the subtitle language.
When completed, press OK to start tuning.
After auto-tuning has completed, you may find the
time is not correct. In this case, you can adjust the
time by using
and
Time Setting, and
and
time.
The Auto tuning screen will appear and the television will
start to search for available stations.
The progress bar will move along the line.
DTV AUTO TUNING
20_23790W_TOSHIBA_MB22_CT8003_(PAN_EU-DVB-T) (20W330DG-23W330DG).p65
Digital Tuning
You must allow the television to complete the search.
When the search is complete the Auto tuning screen will
display the total number of services found.
or
buttons. Use
buttons to highlight Local
buttons to set the correct
English - 8 -
8
DTV AUTO TUNING
22
9
Use
or
to move through the list to select a
programme then press OK to view.
02.04.2007, 09:45
page
4.
Advertisement
Table of Contents
