Description Of Parts - Silvercrest SPMR1 B1 Operation And Safety Notes

away from the body. When a carry case, belt clip or other form of
device holder is used for body-worn operation, it must not contain
any metal and should provide at least the above stated separation
distance from the body.
Always keep as much distance from the antenna as possible. The
antenna shall not be touched during use.
Do not look directly into the beam of the LED light. The luminaire is not
intended for household use.
Use the belt clip if you want to carry the handeld transceiver with you.
The charging tray does not meet any protection class against dripping
or splashing water. It must be kept away from dripping and splashing
water.
The charging cradle has a current consumption of 550mA. The use of
a USB port of a PC or notebook must be avoided.
Observe the regulations and laws in the country of use:
Power your PMR off when on an aircraft and the cabin attendants
instruct you to do so. You must follow the airline flight and cabin crew
instructions when using the product.
Power the product off wherever you encounter any signs indicating
you must do so. Hospitals and medical facilities may use devices that
are sensitive to RF fields.
In some countries it is forbidden to use your PMR while driving a
vehicle, in which case stop your vehicle beside the road before using
it.
Do not touch the antenna while transmitting, as this may result in
decreased range.
P Description of parts
Please refer to the fold out pages.
Handheld transceiver
1 Display
2 Antenna
3 2.5mm connecton for headset (with rubber cover)
4 LED lamp
5 Up button
6 Menu button
Monitor/ Channel Scan button
7
8 Down button
9 USB charging socket (with rubber cover)
14 GB/IE/NI