Download Print this page

Buffalo Tools LED20 Instructions

Led work light

Advertisement

Quick Links

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO
NOT OPERATE THIS PRODUCT!
HAVE QUESTIONS OR PROBLEM S ? CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, call Customer Service at
1-636-532-9888, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE REFERENCE.
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may
result in serious personal injury. Do not look directly at the light; may cause injury to your eyes.
● Do not use the product for anything other than its intended purpose.
● Keep the product out of the reach of children and pets. This product is not intended for use by children.
● Close supervision is necessary when this product is used near children.
● Place the product on a flat, steady, stable, scratch-resistant surface.
ITEM # LED20
LED Work Light Instructions
.

Advertisement

loading

Summary of Contents for Buffalo Tools LED20

  • Page 1 ITEM # LED20 LED Work Light Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur.
  • Page 2 The worklight is shipped with a minimal charge in the internal battery pack. The Initial Charging Procedure must be completed before first use to ensure proper battery life and performance. Failure to follow described charging procedures could permanently damage the internal battery pack. The power light will turn red during charging, and will turn green when the charge is complete.