Page 2
User Manual The Ant Spiral Tower made of high quality acrylic is used to bridge the height from the ant arena to the ant farm and additionally offers the ants a lot of walking distance on a compact area. The additional walking distance simulates the paths that ants have to cover in nature to their food sources and can have a positive effect on the development and behavior of the ant colony.
Page 3
Construction Step 1 - Unpacking First, open the packaging with scissors or a knife. Be especially careful not to damage any of the individual parts. Take out all the parts and check that everything is included. Step 2 - Remove foil Remove the protective foil from all components.
Page 4
Step 3 - Assemble Before assembling, you need to know exactly how you want your ant spiral tower to look in the end, because it can be assembled in many different ways. Note: If you make a mistake or want to use the spiral tower in a different combination later, you can easily disassemble it again.
Page 5
Now take the second bottom/deck plate and insert the hose access here like with the first, and fix it with a clamping pin. Again, make sure to use the right variant for your formicarium. Place the second base/cover plate on the four tube columns from above. Press everything firmly and now fix the hose columns with the remaining four clamping pins.
Page 6
Step 4 - Insert hose Next, insert the hose into the spiral tower scaffold. To do this, cut the cable ties on the coiled hose. Now push the hose through the hose access. It does not matter whether you use the upper or lower end of the spiral tower scaffold.
Page 7
Press the hose firmly against the hose columns and continue winding it to the end. There, too, you push the hose through the hose access again. If the hose ends stick out too far, you can shorten them with scissors or a knife. Step 5 - Connecting to the formicarium The setup is now complete and you can connect your...
Page 8
All further information about our ant spiral tower you can find on www.antstore.net/shop www.antcube.shop under the following QR code / link https://antcube.shop/product-category/formicarium-components/spiral-tower/ Manufacturer: ANTSTORE Phone +49 30 766 870 51 Selerweg 41 030 766 870 54 D-12169 E-Mail contact@antcube.de www.antstore.de Item number: 1005615 -1005620...
Need help?
Do you have a question about the 1005615 and is the answer not in the manual?
Questions and answers