Flexcom ICAR IK101A Installation And Operating Instructions Manual

Flexcom ICAR IK101A Installation And Operating Instructions Manual

Advertisement

Quick Links

Flexcom Communication Ltd
Installation and operating instructions (2021/03/16)
Installation and operating instructions
ICAR IK101A tracking smart watch
Introduction
In developing the products we offer, the manufacturers have acted with the utmost care and in
accordance with international standards.
Warranty
We offer a 12-month warranty on the products, which is valid from the date of purchase. Keep the
invoice or block you received at the time of purchase and / or the warranty card of the device,
because you can only enforce your warranty claim if you have them. During the warranty period, we
will replace any defective main unit, accessory or software of the product in the event of any defect
attributable to a manufacturing, material or software defect. Subsequent repairs to the device or its
accessories are not permitted by the manufacturer due to the design of the device.
The warranty does not cover a product (or accessory) that has been damaged or rendered inoperable
due to attempts to modify or repair the software, physical impact, poor voltage, improper use.
To ensure proper, effective and safe use of the product, read the instruction manual carefully and
keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product
damage, short-term or long-term health damage that may occur as a result of use, repair, storage
and transport other than those described in this manual.
Rights, trademarks
© 2019, Flexcom Kommunikációs Kft.
All rights reserved. No part of our printed or online publications may be reproduced, distributed or
transmitted in any form or by any means, including photocopying, recording or other electronic and
mechanical methods, without the prior written permission of the publisher. To obtain a permit,
contact your dealer:
Contact
1/25

Advertisement

Table of Contents
loading

Summary of Contents for Flexcom ICAR IK101A

  • Page 1 To ensure proper, effective and safe use of the product, read the instruction manual carefully and keep it for future reference. Flexcom Kommunikációs Kft. Shall not be liable for any damage, product damage, short-term or long-term health damage that may occur as a result of use, repair, storage and transport other than those described in this manual.
  • Page 2 Mobile 2: +36 70 3333 527 Phone service: (Monday-Thursday) 9.00–15.00 Every effort has been made to ensure that the information in our documents is accurate. Flexcom Kommunikációs Kft. Is not responsible for typographical errors and misspellings. Flexcom GPS Tracking Solutions, GPS Positioning System, Nyomkovetes.net is a registered trademark and domain name of Flexcom Kommunikációs Kft.
  • Page 3 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Formats and notations The following style settings are used in descriptions, guides, and other documents: Name of product components, instructions, options, processes, services, user interface Bold text elements. Italic text Links to other publications, emphasis.
  • Page 4: Product Description

    Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Product Description The device combines several functions of accurate positioning, safety, monitoring, emergency alarms and full tracking. It supports SMS / GPRS / Internet data transfer functions and can be widely used in many areas of location-based services, traffic safety and management.
  • Page 5: How To Use

    Flexcom Communication Ltd Installation and operating instructions (2021/03/16) How to use You can use the device after charging, inserting the SIM card, and setting it up via SMS or a mobile phone or PC application. The device automatically connects to the GPS and GSM networks using the GPS receiver and the SIM card (if available) and starts collecting position data, which can be queried using SMS or an Internet application.
  • Page 6: Safety And Handling

    Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Safety and handling Conditions for safe use of the product Information for people with long-term health problems or disabilities This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 7 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) The product does not contain harmful, toxic substances. Its internal components, outer casing and accessories are not made of, or only slowly degraded, materials - an appropriate waste disposal procedure must be followed.
  • Page 8: Technical Parameters

    Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Technical parameters Physical characteristics Parameter Value Dimensions (mm) W: 35, L: 55, H: 15 Weight (g) Humidity from 5% to 95% (none condensing) IP67 (dust and water resistant, the latter up to 1...
  • Page 9 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Motion sensor during sleep Interface Parameter Value GSM antenna Internal GPS antenna Internal Built-in microphon Built-in speaker SOS button Chat button 9/25...
  • Page 10 The package consists of a box containing the device and its accessories. Unpacking Open the box. Remove the product. Remove the retaining insert to protect the device. Remove the accessories below. Contents of the package 1 ICAR IK101A tracking smart watch 1 USB charging cable 10/25...
  • Page 11 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) 1 installation instructions Preparing the SIM card As with mobile phones, a SIM card is required to operate the device. The device communicates with the mobile service provider's network via SIM card, SMS or mobile phone or PC applications.
  • Page 12 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Device Setting SMS message response pw,123456,apn,apn-name,apn-username,apn-password,MCC/MNC apn ok code# APN names for domestic service providers: In case of problems, check the exact settings with your mobile service provider! Telenor: online or net...
  • Page 13 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Unscrew the protective cover. Insert the card into the slot on the left side of the watch, chip up, in the direction of the buttons. Screw the protective cover back on. Charging the battery The watch is powered by a built-in battery, which needs to be charged at different intervals...
  • Page 14 For Android phones Open the Google Play app on your phone. Search for “Flexcom” or “Flexcom tracking” on Google Play. Install the tracking application. Scan the QR code shown here with your phone. Open the web address decoded from this.
  • Page 15 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Use of the product User interface The connectors and controls of the device are located at both ends, under a protective cover, and on one side of the microphone. SOS button (red)
  • Page 16 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Green or red indicators related to the status and operation of the device. Red: Flashes 1 every 5 seconds: low battery (<20%) Flashes 1 per 1 second: during charging. Green: Flashes for 5 seconds: incoming call indication.
  • Page 17: Operation

    SIM card. Messages can be sent to the device using desktop or mobile phone software. The software is provided by the distributor of the device (Flexcom Kft) in a subscription system. The software expands the clock tracking service with map position and real-time or backward route display, as well as advanced data delivery capabilities.
  • Page 18 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Normal operation of the device The device can be operated in the following ways: using the software service provided by the distributor and the SIM card together, in addition to the software service provided by the distributor but using his own SIM card, or without the service provider's software service, with your own SIM card.
  • Page 19 SIM card. Setting options via software When using the desktop or mobile application of Flexcom Kft, the setup operations related to tracing can be accessed in the following ways. The settings and commands that can be issued depend on the type of device. See the rest of this guide for information on options for this device.
  • Page 20 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Select the desired device on the map or in the menu. Click the Settings or Commands button to select the general setting or behavior you want. When using a mobile application: From the application menu, select Map.
  • Page 21 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Switch to the Tools panel. Find your device in the list of devices and tap the Setup icon next to the ID. Select the desired setting or, when sending a command, select Commands.
  • Page 22: Troubleshooting And Repair

    Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Troubleshooting and repair Conditions for safe use of devices Information for people with long-term health problems or disabilities This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 23 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Identifying problems and possible solutions Symptom Possible cause Solution The device does not turn on or turns off The battery may be Charge the battery. immediately after turning exhausted. it on. Check the strength of the GSM connection. If the LED is solid amber, there is no connection to the No GSM connection.
  • Page 24 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) During the warranty period, if the conditions of the warranty have not been violated, the distributor will take care of the professional investigation of the cause of the failure, repair of the error or replacement of the device.
  • Page 25 Flexcom Communication Ltd Installation and operating instructions (2021/03/16) Decommissioning Disposing and destroying the device If you decide to stop using the appliance, do not throw it away with the normal household waste. The device is a complex structure and its components contribute to environmental problems to varying degrees.

Table of Contents