Download Print this page

Classic CMK3A Quick Setup Manual

Table of Contents

Download this manual

Hauptwerk IV no longer has default conﬁgurations for hardware. So, as long as each button,

switch and key sends a unique message, Hauptwerk is happy.

So, we have made it easy to conﬁgure your CMK3A keyboards with piston and key presses and

without having to use conﬁguration software. The keyboards ship with conﬁg #1 as the default.

Once you connect your CMK3 to power, there are 5 different conﬁguration to choose from.

We recommend that you use preset 3 for the manual (usually the bottom) that you want your "set"

and "general cancel" on. The "set" button sends a note on/off message on MIDI channel 7 which

allows you to have a "hold and set" kind of "set" button.

Keyboard = Ch 4. Pistons 2 -19 = Program changes 2 - 19 on Ch.4.

Piston 1 (set) = Ch. 7 Note 56 (dec). Piston 20 (cancel) = Ch. 7 Prog 64 (dec).

For the other manuals, you can use a different one of the other presets on each.

Analog input 1 = Ch. 2 Volume (07). Analog input 2 = Ch. 3 Volume (07)

CMK3A Quick Setup Guide

Table of Contents

Do you have a question about the CMK3A and is the answer not in the manual?

Page 1 Hauptwerk is happy. So, we have made it easy to conﬁgure your CMK3A keyboards with piston and key presses and without having to use conﬁguration software. The keyboards ship with conﬁg #1 as the default.
Page 2 Keyboard = Ch. 3. Pistons send Program changes 1 - 20 on ch. 3. Analog input 1 = Ch. 3 Volume (07). Keyboard = Ch. 5. Pistons send Program changes 1 - 20 on ch. 5. Analog input 1 = Ch. 5 Volume (07) The ﬁnal preset is much like preset #3 (or bottom keyboard) only it does not have the “set”...