Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for BWS BEST WAY STONE Antico
- Page 1 Antico Fireplace...
- Page 2 Important: Read prior to installation Antico Fireplace It is the responsibility of the consumer to read and follow the proceeding information. WARNING Fire brick related fire can occur DO NOT use charcoal, pressure when there is a failure to maintain treated lumber, chipped wood 1.
-
Page 3: Materials Included
Mantle 2 Mantle 3 Mantle 4 Base Preparation If installing your Best Way Stone Antico If you are installing on a solid base Note: This manual was updated Fireplace on an unstructured base, such as an existing patio, base prep is May, 2021. - Page 4 Instructions Antico Fireplace Step 1 Lay down the first layer as shown in the diagram. 12" x 8" Check that stones are level at every step. Use included shims for adjustments. 8" x 8" USE: 4" x 8" 12" x 8" Antico stackers – 14 8"...
- Page 5 Instructions Antico Fireplace Step 4 Lay out the fourth layer as shown in the diagram. Check that stones are level. Use included shims for adjustments. USE: 12" x 8" Antico stackers – 6 8" x 8" Antico stackers – 2 4"...
- Page 6 Instructions Antico Fireplace Step 7 Lay down the ninth layer as shown in the diagram. Check that stones are level at every step. Use included shims for adjustments. USE: 12" x 8" Antico stackers (Ultra Black) – 5 8" x 8" Antico stackers (Ultra Black – 2 4"...
- Page 7 Instructions Antico Fireplace Step 10 Lay down the eleventh layer as shown in the diagram. Glue block Check that stones are level at every step. Use included shims for adjustments. USE: 12" x 8" Antico stackers – 8 8" x 8" Antico stackers – 2 4"...
- Page 8 Instructions Antico Fireplace Step 13 This shows how the fireplace will look when all the firebricks installed. Check that stones are level at every step. Use included shims for adjustments. WARNING: Only use silicone when securing the fire brick. Step 14 Apply fire resistant silicone to the tops of the firebrick as well as to the Antico Stacker supports on the front.
- Page 9 Instructions Antico Fireplace Step 16 Place the mantle on to the twelfth layer as indicated in the diagram. This is best done with two people. Adjust the mantle as needed to ensure that it is centered and has a 2" overhang on both sides and the front.
- Page 10 Instructions Antico Fireplace Step 19 Lay out the fifteenth layer as shown in the diagram. Check that stones are level. Use included shims for adjustments. USE: 12" x 8" Antico stackers – 4 8" x 8" Antico stackers – 2 4"...
- Page 11 Instructions Antico Fireplace Step 22 Place the Antico stackers as shown in the diagram. Glue pieces to the mantle using the adhesive provided. Allow glue to set 2 hours before installing Mantle 4. USE: 4" x 8" Antico stackers – 4 Step 23 Place the cap on to the Antico Stackers shown in the diagram.
-
Page 12: Maintenance Instructions
After Installation Antico Fireplace CURING INSTRUCTIONS DO NOT USE LIQUID FUEL MAINTENANCE INSTRUCTIONS (firelighter fluid, gasoline, kerosene or Upon installation of your new fireplace, Make sure that the fireplace is similar liquids) to start or maintain a completely cool before inspecting and there are still small amounts of fire. - Page 13 Notes Antico Fireplace 1-800-bestway (237-8929) bestwaystone.com bestwaystone...
- Page 14 1-800-bestway (237-8929) facebook/bestwaystone bestwaystone.com @bestwaystone pinterest/bestwaystone Woodbridge (Head Office) Uxbridge 8821 Weston Road 65 Anderson Boulevard houzz/bestwaystone Woodbridge, ON L4L 0K9 Uxbridge, ON L9P 0C7 905-851-5122 905-640-5845 905-851-7603 905-640-9773 @bestwaystone...
Need help?
Do you have a question about the BEST WAY STONE Antico and is the answer not in the manual?
Questions and answers