Network Connection - Samsung 6 Series User Manual

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or
wireless connection.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem. You can use a wireless
network to use the Samsung Wireless LAN Adapter where is built-in the TV.
The LAN Port on the Wall
Samsung's Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung
recommends using IEEE 802.11n. When you play the video over a IEEE 802.11b/g connection, the video may
not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network
through an access point or AP (typically a wireless IP Sharer) to transmit an encrypted security code called an
access key.
Your TV is compatible with the following security protocols:
• Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
• Encryption Type: WEP, TKIP, AES
Configuring the Network Connection - Wireless
The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure
network connections automatically. If your have a Static IP network, see your user's manual for configuration
instructions.
To configure your network connection for a network that uses DHCP, follow these steps:
1. Connect your TV to your network as shown in the illustrations above.
2. Turn on your TV, press the
3. Select Wireless(General).
4. The Network function searches for available wireless network. When done, it displays a list of the available
networks.
5. In the list of network, press the ▲ or ▼ button to select a network, and then select Next.
6. If you have selected an AP that has security, the security key screen appears. Enter the Security key
(Security or PIN), and then select Next.
✎
When you enter the Security Key (Security or PIN), use ▲ / ▼ / ◄ / ► buttons on your remote to select
numbers and characters.
7. The Network Test screen appears and verifies the network connection. When the connection has been
verified, the "Internet connection successful." message appears.
✎
For more detailed information, see "Wireless Network Connection" in the e-Manual.

Network Connection

Wireless IP Sharer
(AP having DHCP Server)
LAN Cable (Not Supplied)
button on your remote, and the select Network → Network Settings.
MENU
English - 13
TV