DSG Technology S200 Quick Start Manual

Usb phone

Advertisement

Quick Links

Quick
Guide
Start

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S200 and is the answer not in the manual?

Questions and answers

Summary of Contents for DSG Technology S200

  • Page 1 Quick Guide Start...
  • Page 2 Overview This booklet provides an overview for USB Phone S200, DSG SoftPhone and DSG ITSP Network services. DSG S200 is a USB phone connects to your computer via a USB plug. It provides clear voice quality allowing you to bypass the sound card to avoid the possible of distortion when place calls.
  • Page 3 Installation You will need to install DSG SoftPhone and connect USB Phone S200 to your computer to complete the setup. Step 1. Installing DSG SoftPhone Insert the DSG CD into the CD-ROM drive of your computer. The setup wizard will start automatically. Follow the on-screen instruction to complete the installation of DSG SoftPhone application.
  • Page 4 If your computer's OS is Windows 98, you might see a dialog box require you to assign the drivers. Follow the procedures below to install drivers. Under 'What do you want Windows to do?', select 'Display a list of all the drivers in a specific location, so you can select the driver you want' and then click Next.
  • Page 5 Run DSG SoftPhone. When you run DSG SoftPhone for the first time, the audio wizard will be launched automatically to fine-tune your voice input and output. Follow the on-screen instructions to make sure your USB Phone S200 is working properly.
  • Page 6 Open DSG SoftPhone and log in with your user name and password. DSG SoftPhone provides PC-to-Phone Mode allowing you to call worldwide regular phones and PC-to-IP Mode allowing you to call other DSG VoIP Devices. You can choose to make phone calls from USB Phone S200 or DSG SoftPhone. Making PC-to-Phone Calls First of all make sure you are in PC-to-Phone mode.
  • Page 7 DSG VoIP device with you. Notice that the IP address you wish to call should be a public IP address. To place a call using USB Phone S200, dial the receiver's IP address, separating the IP address sections with ' ' button, and press Talk.
  • Page 8 2003 DSG Technology. All rights reserved. DSG, DSG Technology, and the DSG Technology logo are registered trademarks of DSG Technology , Inc. or its affiliates in the U.S. All other trademarks mentioned in this document are the property of their respective owners.

Table of Contents