Managing Date And Time Settings - Suzuki MARUTI SMARTPLAY PRO+ Manual

12 | en
CHANGING DISPLAY BRIGHTNESS
1. Tap Brightness.
2. Tap + or - to set the brightness to a
value in the range of 0 to 20.
CHANGING DISPLAY CONTRAST
1. Tap Contrast.
2. Tap + or - to set the contrast to a value
in the range of 0 to 20.
NOTE :
To set value, you can also drag the slider
in the required field.
DISPLAYING MODE
1. The system displays the current mode
of the vehicle on this option. Auto will
be default mode. If the headlights of the
vehicle are switched ON the system will
be in Night mode, else it will be in Day
mode.
2. You can select item by pressing any-
where in the respective box.
3. The display brightness will be automati-
cally set accordingly.
NOTE :
If speedometer illumination is set to 7th
step, system brightness will always remain
in day mode in spite headlights are turned
ON/OFF.
DISPLAYING WALLPAPER MODE
1. The system will display Wallpaper Mode
screen.
2. Tap Clock Type. The system displays the
Clock Type screen. Choose among the
available options.
3. Tap Wallpaper to enable / disable wall-
paper option.
4. Tap Select Wallpaper from available
options.
3.4.2 MANAGING DATE AND TIME
SETTINGS
Using the date and time settings you can:
Enable / disable synchronization of the
system date and time with the GPS.
Enable / disable the display of system
time in the 24 hour format.
Set/change the date and time of the
system either automatically or manually.
Enable / disable day light savings.
Figure 9: Date & Time Settings
Getting Started
DISPLAYING THE DATE AND TIME
SETTINGS SCREEN
In the System Settings screen, tap the
Date & Time option. The system displays
the Date and Time Settings screen.
ENABLING SYNCHRONIZATION WITH
GPS
Tap Sync with GPS. The system enables
synchronization with GPS.
Figure 10: Date & Time Setting (GPS OFF)
SETTING DATE AND TIME
Auto-setting date and time
1. Ensure Sync with GPS option is en-
abled.
2. Tap the Time Zone option. The system
displays the Set Time Zone screen.
3. Scroll through the time zones list and
select the required time zone.