Table of Contents
Advertisement
Quick Links
Combo 64
When
Safety
Matters
Combo 64
Combo 64
The Combo 64 is an advanced safety device aimed to simplify, control
The Combo 64 is an advanced safety device aimed to simplify, control
and warn a driver in case of a problem.
and warn a driver in case of a problem.
It utilises the latest digital, micro controller technology to ensure
It utilises the latest digital, micro controller technology to ensure
reliability and performance.
reliability and performance.
It allows for automatic control of preset devices inside the cabin of a
It allows for automatic control of preset devices inside the cabin of a
vehicle.
vehicle.
Utilising six inputs and four outputs, the Combo 64 can automatically
Utilising six inputs and four outputs, the Combo 64 can automatically
warn a driver that the hand brake is not on, can turn on DRL's as a
warn a driver that the hand brake is not on, can turn on DRL's as a
preset function, turn beacons on and has many more applications.
preset function, turn beacons on and has many more applications.
D
S S
Digital witching ystems Australia
S
S
- Beacon Conrol
- Spare Output
- D.R.L Control
- Park Brake Alarm
(Part No. DSS-CBO64)
(Part No. DSS-CBO64)
A
Advertisement
Table of Contents
Summary of Contents for DSSA Combo 64
- Page 1 Combo 64 Combo 64 - Park Brake Alarm The Combo 64 is an advanced safety device aimed to simplify, control The Combo 64 is an advanced safety device aimed to simplify, control and warn a driver in case of a problem.
-
Page 2: Typical Connection
Overview The Combo 64 is an advanced safety device aimed to simplify control, and to warn the operatorshould a safety parameter be breached. It utilises the latest digital micro-controller technology to ensure reliability and performance. These instructions are intended for use by an authorised installer. -
Page 3: Operation Overview
Installation Guide Mount the Combo 64 in a dry safe, secure place away from the heat and humidity. If possible,select an inconspicuous area that will not be routinely accessed. Make sure the device is kept clear of moving parts or debris. -
Page 4: Input Configuration
Input Configuration Name Description Default Switch Mode Default Active Mode Input 6 Input 1 General Input 1 Momentary STB High Input 5 Input 2 General Input 2 Momentary STB High Input 4 Input 3 Door Switch Input 3 Input 4 Park Brake Input 2 Input 5... -
Page 5: Dip Switch Configuration
Dip Switch Configuration Voltage Daytime Running Light Trigger Setting Note: Red LED lights up when the DIP switch General Input Selection is switched to right. General Input 1 Selection General Input 2 Selection Door Switch Selection Park Brake Selection Switch to Left Switch to Right Work Light Selection Hi Beam Selection... - Page 6 * In case Park Brake Indicator on the dash board lights up after connecting the Park Brake Switch to the Combo 64 Input, installer should install a separate Park Brake Switch for connecting to Combo 64 instead of connecting the original one.
-
Page 7: Electrical Parameters
1. Disconnect Battery before doing any connection. 2. Connect Momentary Switch 1 and 2 to the Safe Guard 64 General Input 1 and General Input 2 Combo 64 respectively. 3. Connect device to be operated by General Input 1 and General Input 2 to Safe Guard 64 General Combo 64 Output 1 and General Output 2 respectively. -
Page 8: Mechanical Parameters
For Ignition Setting 1. Disconnect Battery before doing any connection. 2. Connect Ignition Switch to the Combo 64 Ignition Switch input respectively. 3. Connect Daytime Running Light to Combo 64 Daytime Running Light Output. 4. Ensure the polarity Ignition Switch, and set the DIP switch setting accordingly.
Need help?
Do you have a question about the Combo 64 and is the answer not in the manual?
Questions and answers