Vertical SBX IP Admin Manual
  1. Manuals
  2. Brands
  3. Vertical Manuals
  4. Desktop
  5. SBX IP
  6. Admin manual

Vertical SBX IP Admin Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

SBX IP
PC Admin Guide
Release 3.5
June 2010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SBX IP and is the answer not in the manual?

Questions and answers

Summary of Contents for Vertical SBX IP

  • Page 1 SBX IP PC Admin Guide Release 3.5 June 2010...
  • Page 2 Vertical Communications, Inc. reserves the right to revise this publication and to make changes in content without notice. © 2010 by Vertical Communications, Inc. All rights reserved. This publication contains proprietary confidential information Vertical Communications, Inc. The contents of this document may not be disclosed, copied or translated by third parties, in any form, or by any means known, or not now known or conceived, without prior explicit written permission from Vertical Communications, Inc.
  • Page 3 R E V I S I O N H I S T O R Y Release Date Documentation Changes Page No. 06-10 Station Mailbox feature was added (PGM127). 1-45 & 2-39 Virtual Mailbox feature was added (PGM129). 1-47 & 2-40 Voice Mailbox COS feature was added (PGM238).
  • Page 4 THIS PAGE INTENTIONALLY LEFT BLANK.

  • Page 5: Table Of Contents

    Conference Page Zone (PGM 119) - - - - - - - - - - - - - - - - - 1-36 ICM Tenancy Group (PGM 120) - - - - - - - - - - - - - - - - - - - 1-37 SBX IP - PC Admin Guide Release 3.5...
  • Page 6 SMDR Attributes (PGM 177) - - - - - - - - - - - - - - - - - - - - - - 1-86 System Date / Time (PGM 178) - Not Used - - - - - - - - - - - 1-88 SBX IP - PC Admin Guide Release 3.5...
  • Page 7 Networking Attributes (PGM 320/PGM321) - - - - - - - - - - 1-139 Networking CO Line Attribute (PGM 322) - - - - - - - - - - - - - - 1-141 SBX IP - PC Admin Guide Release 3.5...
  • Page 8 General Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-1 Introduction to Offline PCAdminPro - - - - - - - - - - - - - - - - - - 2-1 SBX IP - PC Admin Guide Release 3.5...
  • Page 9 Station Mailbox Attributes (PGM 127) - - - - - - - - - - - - - - - 2-39 Virtual Mailbox Attributes (PGM 129) - - - - - - - - - - - - - - - 2-40 SBX IP - PC Admin Guide Release 3.5...
  • Page 10 Station Group - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-88 SBX IP - PC Admin Guide Release 3.5...
  • Page 11 RSG/IP Phone Programming - - - - - - - - - - - - - - - - - - - - - - - 2-133 VOIB Slot Assignment for RSG/IP Phone (PGM 380) - - - 2-133 SBX IP - PC Admin Guide Release 3.5...
  • Page 12 Editing Data - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-8 SBX IP - PC Admin Guide Release 3.5...
  • Page 13 Editing Excel File - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-10 Index SBX IP - PC Admin Guide Release 3.5...
  • Page 14 THIS PAGE INTENTIONALLY LEFT BLANK.

  • Page 15: Sbx Ip Online Pc Admin

    General Description I ntroduction to Online PC Admin The SBX IP PC Admin performs the Admin function on your PC instead of a keyset so that you can manage the functions more conveniently. It performs all the function of keyset programming, and runs on Windows NT/2000/XP/Vista.
  • Page 16 One connector must be a 9-pin female connector that is to be connected to the SBX IP, and the other one must fit the serial port of the PC. There are three required lines that must be connected for the communication between the PC and the SBX IP system: Ground-Ground, Transmit-Transmit, and Receive-Receive.

  • Page 17: Installation Of The Online Pc Admin Software

    Installation of the Online PC Admin Software Chapter 1: SBX IP Online PC Admin I nstallation of the Online PC Admin Softw are 1. Put the CD-ROM into your PC. 2. Run Explorer on your PC and search for the setup.exe on the CD-ROM.
  • Page 18 Installation of the Online PC Admin Software Chapter 1: SBX IP Online PC Admin 5. You can change the install directory if desired or click [Next] to install the directory to the default directory as shown in the illustration above.

  • Page 19: Brief Outline Of Pc Admin

    Passw ord As you execute the SBX IP PC Admin application, you will see the box below to enter a user ID and password. An Administrator must assign the user ID, access level, and password for each user.

  • Page 20: Connection Type

    Chapter 1: SBX IP Online PC Admin Connection Type From V3.0, PC Admin supports LAN and serial connections directly. Because the SBX IP system uses a PPP connection, PC Admin can be connected with PPP from your PC. PC Admin uses a small program to manage the connection separately. This connection manager is not done by itself.

  • Page 21: Basic Information

    Reload, Debug Window, and Item Window. Tx/Rx LED This LED will illuminate when PC Admin sends or receives data from the SBX IP system. Nation Code and Site Name This information will be displayed when connection is established between PC Admin and the SBX IP system.

  • Page 22: Level Management - Administrator Only

    Level Management - Administrator Only Chapter 1: SBX IP Online PC Admin Level Management - Administrator Only Description and how to program PC Admin supports multi level of users. Administrator has highest priority and can assign levels to each user.
  • Page 23 Level Management - Administrator Only Chapter 1: SBX IP Online PC Admin 2. Press [New] button to assign a new level. 3. Enter the level that you want to add. Duplicated levels are not allowed. After entering a level, you can select the features that you want to disable with the assigned level.

  • Page 24: User Management - Administrator Only

    User Management - Administrator Only 1-10 Chapter 1: SBX IP Online PC Admin User Management - Administrator Only Description and how to program PC Admin supports multiple users with different levels. When you want to add or modify the user information, refer to below description.

  • Page 25: Ldk Utilities

    Editor has different characteristics. Some users do not want to use this utility and other users want to use it. So, SBX IP PC Admin supports an optional Speed Editor. If you want to link speed editor to PC Admin, select [ipLDK Utility] > [ipLDK Speed Editor Path] to link the program.

  • Page 26: Pre-Programmed

    Chapter 1: SBX IP Online PC Admin Pre-Programmed The SBX IP system is operated by default values when you first install the system. You can change these default values such as Location Information, Slot Assignment, and Numbering Plan. Pre-Programmed items are from PGM 100 to PGM 108. Click on the Pre-Programmed item in the Menu List to expand the menu and to reprogram the desired function.
  • Page 27 Location Information (PGM 100) 1-13 Chapter 1: SBX IP Online PC Admin Operation 1. Click [Location Information]. 2. USA is the default value of Nation Code. You can change the code. 3. Before changing the Nation Code, check the DB Protected by DIP4. If DB Protected is enabled, nation code will not be changed.

  • Page 28: Slot Assignment (Pgm 101)

    Chapter 1: SBX IP Online PC Admin Slot Assignment ( PGM 101) The SBX IP system supports a max of 10 slots. This program assigns each slot to one type of the boards. Slot Assignment is possible by the system automatically or by the PC Admin program manually.

  • Page 29: Logical Slot Assignment (Pgm 103)

    Logical Slot Assignment (PGM 103) 1-15 Chapter 1: SBX IP Online PC Admin To assign board manually, choose one of the slots and a board type: When you use this feature, you can not modify the logical port number, except for the DCOB.
  • Page 30 Logical Slot Assignment (PGM 103) 1-16 Chapter 1: SBX IP Online PC Admin In the case of VOIBE, if you select VOIBE slot into any type of COL/STA type, it will be added in the other slot type. For example, if you select a VOIBE slot in COL board type, the PC Admin software will add the VOIBE slot to the STA board type automatically.

  • Page 31: Numbering Plan Type (Pgm 104/105/106/107/109)

    Numbering Plan Type (PGM 104/105/106/107/109) 1-17 Chapter 1: SBX IP Online PC Admin Numbering Plan Type ( PGM 104/ 105/ 106/ 107/ 109) The default range of the station numbers is from 100 to 131. You can change the range according to the nation or to fit your style.
  • Page 32 Numbering Plan Type (PGM 104/105/106/107/109) 1-18 Chapter 1: SBX IP Online PC Admin Flexible Numbering Plan for SBX IP (PGM104) ITEM INTERCOM RANGE DEFAULT REMARK Number Set Type 1 100-131 As the basic type, the 1st digit of the station numbers should be 1-4.

  • Page 33: Ip Setting (Pgm 108)

    But in that case, it is not a real hostname (optional). 3. Enter the Server IP Address of the SBX IP system. The IP address is assigned by the network administrator. If you don't want to use the network connection, you might skip this feature.

  • Page 34: Board Attributes (Pgm 155)

    Board Attributes (PGM 155) 1-20 Chapter 1: SBX IP Online PC Admin Board Attributes ( PGM 155) You can program the board attributes of equipped board. Operation 1. [Configuration] > [Select slot] > [Board Attribute (R2 CRC Check)]. 2. If you select the slot number, then R2 CRC Check data will be displayed.
  • Page 35 Station ID Assignment (PGM 110/111/112/113/114) 1-21 Chapter 1: SBX IP Online PC Admin 2. Right-click for other programming. 3. Select the menu that you want to change. Then a different window for the menu that you selected will display. For example, the following window displays Station Attribute I (PGM111).
  • Page 36 Station ID Assignment (PGM 110/111/112/113/114) 1-22 Chapter 1: SBX IP Online PC Admin 5. To edit the attribute, right-click and select the [Edit Tool] option. The edit window will display and you can edit the attributes. SBX IP - PC Admin Guide Release 3.5...
  • Page 37 Station ID Assignment (PGM 110/111/112/113/114) 1-23 Chapter 1: SBX IP Online PC Admin 6. After editing, press the [Update] button to save the changed values. SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 38 Station ID Assignment (PGM 110/111/112/113/114) 1-24 Chapter 1: SBX IP Online PC Admin Station Attributes I (PGM111) ITEM RANGE DEFAULT REMARK Auto Speaker ON/OFF Allows accessing a CO line or placing a DSS call by pressing an Selection appropriate {CO} or {DSS} button without lifting the handset or...
  • Page 39 Station ID Assignment (PGM 110/111/112/113/114) 1-25 Chapter 1: SBX IP Online PC Admin Station Attributes I (PGM111) ITEM RANGE DEFAULT REMARK Off-net Call EN/DIS The possibility to enable/disable Off-net call forward Forward Force HF ON/OFF Forced Handsfree configuration (from V3)
  • Page 40 Station ID Assignment (PGM 110/111/112/113/114) 1-26 Chapter 1: SBX IP Online PC Admin Station Attributes II (PGM112) ITEM RANGE DEFAULT REMARK ENABLE/ ENABLE The allowance to answer calls by simply lifting handset or pressing the DISABLE [SPEAKER] button with the answering priority...
  • Page 41 Station ID Assignment (PGM 110/111/112/113/114) 1-27 Chapter 1: SBX IP Online PC Admin Station Attributes III (PGM113) ITEM RANGE DEFAULT REMARK Admin ENABLE/ DISABLE ENABLE allows the station to program the Admin Database. This DISABLE feature is available at only DKTUs (STA 100 is Enabled by default).
  • Page 42 Station ID Assignment (PGM 110/111/112/113/114) 1-28 Chapter 1: SBX IP Online PC Admin Station Attributes III (PGM113) ITEM RANGE DEFAULT REMARK Station Port ON/OFF If this value is set to ON, the station is blocked and it is impossible to...
  • Page 43 Station ID Assignment (PGM 110/111/112/113/114) 1-29 Chapter 1: SBX IP Online PC Admin ISDN Station Attributes (PGM114) ITEM RANGE DEFAULT REMARK Sub Address This field indicates how the sub-address is used in the SETUP message. 0: Station sub-address not used.

  • Page 44: Flex Buttons Assignment (Pgm 115)

    Flex Buttons Assignment (PGM 115) 1-30 Chapter 1: SBX IP Online PC Admin Flex Buttons Assignment ( PGM 115) This feature is to enable programming flexible button and copy feature (PGM 125). Select [Flexible button assignment] from the popup menu and the configuration window displays.
  • Page 45 Flex Buttons Assignment (PGM 115) 1-31 Chapter 1: SBX IP Online PC Admin 3. To assign another function to a flex button, double-click on the row of the flex button. The following dialog window displays. 4. Refer to the following table, and select the type and value in the update tool. Pressing [Update], displays the changed values.
  • Page 46 Flex Buttons Assignment (PGM 115) 1-32 Chapter 1: SBX IP Online PC Admin [Auto Increment] and [Auto Copy] are exclusive. You can select only one at one time. Information for Flex Button Assignment TYPE RANGE REMARK User Button User can program by button programming procedure.

  • Page 47: Station Cos (Pgm 116)

    Station COS (PGM 116) 1-33 Chapter 1: SBX IP Online PC Admin Station COS ( PGM 116) You can change the COS (Class of Service) for each station. COS is from COS 1 to COS 7. All station COS for day and night operation is COS 1 by default.
  • Page 48 Station COS (PGM 116) 1-34 Chapter 1: SBX IP Online PC Admin 4. To update the COS level, right-click in the window and click on the [Update Tool] button. The following Update Tool displays where you can change values. With this tool, you can edit one station or a range of stations.

  • Page 49: Co Group Access Station (Pgm 117)

    CO Group Access Station (PGM 117) 1-35 Chapter 1: SBX IP Online PC Admin CO Group Access Station ( PGM 117) You can divide the CO lines by group, and give a station access to a specified CO line group.

  • Page 50: Internal Page Zone Access (Pgm 118)

    Internal Page Zone Access (PGM 118) 1-36 Chapter 1: SBX IP Online PC Admin I nternal Page Zone Access ( PGM 118) Each station can be assigned to an internal paging zone. Yon can assign a station in a number of zones or no zone at all.

  • Page 51: Icm Tenancy Group (Pgm 120)

    ICM Tenancy Group (PGM 120) 1-37 Chapter 1: SBX IP Online PC Admin I CM Tenancy Group ( PGM 120) You may assign a station to an ICM Tenancy Group, and restrict ICM Tenancy Groups to call each other. Each ICM Tenancy Group can be assigned a different attendant.

  • Page 52: Preset Call Forward (Pgm 121)

    Preset Call Forward (PGM 121) 1-38 Chapter 1: SBX IP Online PC Admin Preset Call Forw ard ( PGM 121) If a station does not respond to an outside call for a certain period of time, the call may be forwarded to another station.

  • Page 53: Hot/Warm Line Selection (Pgm 122)

    Hot/Warm Line Selection (PGM 122) 1-39 Chapter 1: SBX IP Online PC Admin Hot/ Warm Line Selection ( PGM 122) This feature lets a station perform a pre-assigned feature as soon as lifting the handset or pressing the [SPEAKER] button as if a station selects the feature (Hot Line). On the other hand,...
  • Page 54 Hot/Warm Line Selection (PGM 122) 1-40 Chapter 1: SBX IP Online PC Admin 3. Right-click under the headings in the blue area, then click on the [Update Tool] button. Values for Hot/Warn Line Selection ITEM RANGE REMARK Flex Btn 01-48...

  • Page 55: Smdr Account Group (Pgm 124)

    SMDR Account Group (PGM 124) 1-41 Chapter 1: SBX IP Online PC Admin SMDR Account Group ( PGM 124) Stations can be assigned as a member of a call account group on SMDR. A station belongs to only one call account group. The system supports 24 SMDR Account Groups (0-23).
  • Page 56 SMDR Account Group (PGM 124) 1-42 Chapter 1: SBX IP Online PC Admin 4. Enter a single station number in the top of the Update Tool or a range of stations in the bottom of the Tool and choose the account group for assignment SBX IP - PC Admin Guide Release 3.5...
  • Page 57 SMDR Account Group (PGM 124) 1-43 Chapter 1: SBX IP Online PC Admin 5. Click on the associated [Update] button, then click on the [Refresh] button. SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 58: Copy Dss Button (Pgm 125)

    IP address is 10.0.0.5 then you should enter this table with station 101 and IP Address of 10.0.0.5. You can enter this mapped table up to the max station numbers of the SBX IP system. The limitation depends on the lock key that is installed on the SBX IP system.

  • Page 59: Station Mailbox Attributes (Pgm 127)

    Station Mailbox Attributes (PGM 127) 1-45 Chapter 1: SBX IP Online PC Admin Station Mailbox Attributes ( PGM 127) You can provide a mailbox with administrative options to perform common tasks associated with the VM. This mailbox may also be used to record a broadcast message that is delivered to all mailboxes in the system.
  • Page 60 Station Mailbox Attributes (PGM 127) 1-46 Chapter 1: SBX IP Online PC Admin Station Mailbox Attibutes (PGM127) ITEM RANGE DEFAULT Admin Disable/Enable Disable COS 1-5 Announce only Disable/Enable Disable Announce action Hang-up/Previous Previous Outbound Notification Disable/Enable Disable Outbound Notification CO Group 1-24 Outbound Notification Tel.

  • Page 61: Virtual Mailbox Attributes (Pgm 129)

    Virtual Mailbox Attributes (PGM 129) 1-47 Chapter 1: SBX IP Online PC Admin Virtual Mailbox Attributes ( PGM 129) A virtual mailbox is simply a voice mailbox that does not have a digital/IP/SLT extension associated with it. By default, extensions 200-249 are the default virtual mailboxes.
  • Page 62 Virtual Mailbox Attributes (PGM 129) 1-48 Chapter 1: SBX IP Online PC Admin Virtual Mailbox Attibutes (PGM129) ITEM RANGE DEFAULT Admin Disable/Enable Disable VMIB Access Disable/Enable Disable COS 1-5 Announce only Disable/Enable Disable Announce action Hang-up/Previous Previous VMIB MSG password...

  • Page 63: Display Station With Cos (Pgm 130)

    Display Station with COS (PGM 130) 1-49 Chapter 1: SBX IP Online PC Admin Display Station w ith COS ( PGM 130) This feature is linked to Station COS PGM 116. Refer to PGM 116 (Station COS Display). CO Group Access Station ( PGM 131) This feature is linked Station COS PGM117.

  • Page 64: Co Line Base Program

    CO Line Base Program 1-50 Chapter 1: SBX IP Online PC Admin CO Line Base Program Use this CO Line Base Program to change CO Line features. The program numbers are from PGM140 TO PGM147. CO Related Admin ( PGM 140/ 141/ 142/ 143/ 146/ 147) PC Admin links various features that are related to each other.
  • Page 65 CO Related Admin (PGM 140/141/142/143/146/147) 1-51 Chapter 1: SBX IP Online PC Admin If you right-click in the data area of the window and then select the Update Tool the following displays: SBX IP - PC Admin Guide Release 3.5...
  • Page 66 CO Related Admin (PGM 140/141/142/143/146/147) 1-52 Chapter 1: SBX IP Online PC Admin CO Service Type (PGM140) DISA TYPES REMARK Normal CO All lines are assigned as normal CO lines by default. Each CO line in the system can be programmed as a DISA (Direct...
  • Page 67 CO Related Admin (PGM 140/141/142/143/146/147) 1-53 Chapter 1: SBX IP Online PC Admin The following CO Line Attributes window displays when you select the CO Attribute I menu from the popup menu or when you click on the CO Attr I tab.
  • Page 68 CO Related Admin (PGM 140/141/142/143/146/147) 1-54 Chapter 1: SBX IP Online PC Admin CO Line Attributes I (PGM141) ITEM RANGE DEFAULT REMARK CO Line 00-25 Groups should be assigned according to Group CO type and Class-Of-Service. CO COS -CO COS 1: no restriction...
  • Page 69 CO Related Admin (PGM 140/141/142/143/146/147) 1-55 Chapter 1: SBX IP Online PC Admin CO Line Attributes I (PGM141) ITEM RANGE DEFAULT REMARK CO Tenancy Tenancy Group of CO line. Group Emergency ON/OFF If this value is set to ON, the designated...
  • Page 70 CO Related Admin (PGM 140/141/142/143/146/147) 1-56 Chapter 1: SBX IP Online PC Admin CO Line Attributes II (PGM142) ITEM RANGE DEFAULT REMARK CO Line MOH 0: Not assigned by this field. 1: Internal Music 2: External Music 3: Reserved 4-8: SLT MOH...
  • Page 71 CO Related Admin (PGM 140/141/142/143/146/147) 1-57 Chapter 1: SBX IP Online PC Admin CO Line Attributes II (PGM142) ITEM RANGE DEFAULT REMARK Open Loop 00-20 100 msec base Detect Timer Line Length SHORT/ SHORT Line Length of CO (TELKOM only)
  • Page 72 CO Related Admin (PGM 140/141/142/143/146/147) 1-58 Chapter 1: SBX IP Online PC Admin ISDN CO Line Attributes (PGM143) ITEM RANGE DEFAULT REMARK DID Conv 0: convert digits by DID Dgt Conversion Type (PGM230) 1: call to the valid extension. 2: convert digits by Flex DID Table (PGM...
  • Page 73 CO Related Admin (PGM 140/141/142/143/146/147) 1-59 Chapter 1: SBX IP Online PC Admin ISDN CO Line Attributes (PGM143) ITEM RANGE DEFAULT REMARK Double CLI If this value is Service ORI, the real (Calling Party CPN is Number displayed. If Service)
  • Page 74 CO Related Admin (PGM 140/141/142/143/146/147) 1-60 Chapter 1: SBX IP Online PC Admin CO Line Attributes III (PGM146) ITEM RANGE DEFAULT REMARK DID Digit 4 digits #*** When the DID Conversion Type (PGM 143 Mask - FLEX4) is set to 0, the received DID digits are converted by this value.

  • Page 75: Co Ring Assignment (Pgm 144/145)

    CO Ring Assignment (PGM 144/145) 1-61 Chapter 1: SBX IP Online PC Admin CO Ring Assignment ( PGM 144/ 145) Each station can be assigned to receive a CO ring for only a certain period of time such as Day, Night, Weekend, Lunch, and On-demand.

  • Page 76: Co Cid Attributes (Pgm 147)

    CO CID Attributes (PGM 147) 1-62 Chapter 1: SBX IP Online PC Admin CO CI D Attributes ( PGM 147) User can assign some attributes related with CID setting. Operation 1. Click [CO CIDU Attribute]. 2. Enter the CO range for which you want to program CID attributes. Then current values will be displayed.

  • Page 77: T1 Co Line Attributes (Pgm 152)

    T1 CO Line Attributes (PGM 152) 1-63 Chapter 1: SBX IP Online PC Admin CO CIDU Attribute (PGM147) ITEM RANGE DEFAULT REMARK CID Mode OFF, FSK, Select DTMF CID Name NAME/TEL Analog CO line CLI carries the caller's Display telephone number and name. According to this ADMIN program value, LCD displayed data can be selected.
  • Page 78 T1 CO Line Attributes (PGM 152) 1-64 Chapter 1: SBX IP Online PC Admin T1 CO Line Attribute (PGM152) ITEM RANGE DEFAULT REMARK Pause Duration Release 1-60 Guard Time (100ms) DT Delay 2-50 Timer (100ms) Interdigit 15-30 Timer (20ms) Wink Timer...

  • Page 79: System Base Program

    System Base Program 1-65 Chapter 1: SBX IP Online PC Admin System Base Program Use the System Base Program to change any system features. System Attributes ( PGM 160/ 161/ 163) This area of programming changes system attributes. Operation 1. Select System Attributes in main menu. The System Attribute I window will be display and you can select System Attribute II or III by pressing each button.
  • Page 80 System Attributes (PGM 160/161/163) 1-66 Chapter 1: SBX IP Online PC Admin System Attributes I (PGM160) ITEM RANGE DEFAULT REMARK Attendant Call RBT/MOH MOH: The station will present ring back Queuing tone when calling busy attendant station. Ringback RBT: The station will present MOH, hold...
  • Page 81 System Attributes (PGM 160/161/163) 1-67 Chapter 1: SBX IP Online PC Admin System Attributes I (PGM160) ITEM RANGE DEFAULT REMARK Conference ON/OFF When entering a conference, members Warning Tone will receive a warning tone Off-net ON/OFF In case of Off-net call forward, Off-net...
  • Page 82 System Attributes (PGM 160/161/163) 1-68 Chapter 1: SBX IP Online PC Admin System Attributes II (PGM161) ITEM RANGE DEFAULT REMARK Network ON/OFF If this field is ON, the system time/date are Time/Date set by the network time/date. Setting PX Time / Day...
  • Page 83 System Attributes (PGM 160/161/163) 1-69 Chapter 1: SBX IP Online PC Admin System Attributes II (PGM161) ITEM RANGE DEFAULT REMARK Clear ACD ON/OFF Determines if ACD database initializes Database after print-out. after Print VMIB Prompt 00-31 To control prompt gain level...
  • Page 84 DEFAULT REMARK LCR Dial Tone ON/OFF If this value is set to ON, the SBX IP Detect system first checks if the CO provides dial tone in case an analog CO line is seized for LCR dialing. If there is no dial tone, the call is rerouted to the Alternate DMT index.

  • Page 85: Admin Password (Pgm 162)

    Admin Password (PGM 162) 1-71 Chapter 1: SBX IP Online PC Admin Admin Passw ord ( PGM 162) Password is not assigned by default. Operation 1. Click [ADMIN Password]. 2. Enter 4 digits for Admin Password. SBX IP - PC Admin Guide Release 3.5...

  • Page 86: Attendant Assignment And Vmib Announcement Number (Pgm 164/165)

    Attendant Assignment and VMIB Announcement Number (PGM 164/165) 1-72 Chapter 1: SBX IP Online PC Admin Attendant Assignment and VMI B Announcement Number ( PGM 164/ 165) A maximum of 5 Attendants can be assigned, including the Main Attendants and System Attendant.

  • Page 87: Co-To-Co Cos (Pgm 166)

    CO-to-CO COS (PGM 166) 1-73 Chapter 1: SBX IP Online PC Admin CO-to-CO COS ( PGM 166) When a user of a DID/DISA/TIE line accesses another CO line, CO-to-CO COS is applied. The attributes of CO-to-CO COS are the same as the station COS.

  • Page 88: Did/Disa Destination (Pgm 167)

    DID/DISA Destination (PGM 167) 1-74 Chapter 1: SBX IP Online PC Admin DI D/ DI SA Destination ( PGM 167) A station can be programmed to forward a DID call to the Attendant if the station is busy. Vacant or invalid calls are sent to the Main Attendant, or a busy tone is presented as set by admin programming.

  • Page 89: External Control Contact (Pgm 168)

    External Control Contact (PGM 168) 1-75 Chapter 1: SBX IP Online PC Admin • Busy Destination (When a station is busy) TONE: A tone will be heard. ATD: Call will be forwarded to the attendant. Station Group: Call will be forwarded to a station group.

  • Page 90: Lcd Date/Time/Language Display Mode (Pgm 169)

    LCD Date/Time/Language Display Mode (PGM 169) 1-76 Chapter 1: SBX IP Online PC Admin LCD Date/ Time/ Language Display Mode ( PGM 169) You can set a different time/date/language display on the LCD screen. Operation 1. Click [LCD Data/ Time/Language Display Mode].

  • Page 91: Music (Pgm 171)

    Music (PGM 171) 1-77 Chapter 1: SBX IP Online PC Admin Music ( PGM 171) You can assign BGM (Background Music), MOH (Music On Hold), and ICM Box Music Channel. MOH is the music a caller can hear while waiting for his call to be picked up again.
  • Page 92 Music (PGM 171) 1-78 Chapter 1: SBX IP Online PC Admin Operation 1. Click [Music]. 2. Refer to the table below and set the values. ITEM RANGE DEFAULT REMARK BGM Type 00: No BGM 01: Internal Music 02: External Music 03: Reserved...
  • Page 93 Music (PGM 171) 1-79 Chapter 1: SBX IP Online PC Admin ITEM RANGE DEFAULT REMARK DID CO Ring 0 (N/A) To assign external DID ring back tone, set the Back Tone SLT station number of the SLT port. Internal MOH...

  • Page 94: Pbx Access Code (Pgm 172)

    PBX Access Code (PGM 172) 1-80 Chapter 1: SBX IP Online PC Admin PBX Access Code ( PGM 172) You can make an outside call through the station. A maximum of 4 PABX Access Codes are assignable. A PABX Access Code is a 1- or 2-digit number. By default, PABX Access Codes are not assigned.

  • Page 95: Preferred Line Answer (Pla) Priority (Pgm 173)

    Preferred Line Answer (PLA) Priority (PGM 173) 1-81 Chapter 1: SBX IP Online PC Admin Preferred Line Answ er ( PLA) Priority ( PGM 173) You may set up the priority for the order in which calls are received. Operation 1.

  • Page 96: Rs-232C Port Setting (Pgm 174)

    RS-232C Port Setting (PGM 174) 1-82 Chapter 1: SBX IP Online PC Admin RS- 232C Port Setting ( PGM 174) You can set up the RS-232C port configuration. Note: - If you use COM2 as MODU (MODEM interface), the maximum speed is limited to 9600 bps.

  • Page 97: Print Serial Port Selection (Pgm 175)

    Print Serial Port Selection (PGM 175) 1-83 Chapter 1: SBX IP Online PC Admin ITEM RANGE DEFAULT REMARK Baud Rate 19200 0: N/A 1: N/A 2: 1200 Baud 3: 2400 Baud 4: 4800 Baud 5: 9600 Baud 6: 19200 Baud...
  • Page 98 Print Serial Port Selection (PGM 175) 1-84 Chapter 1: SBX IP Online PC Admin Operation 1. Click [Print Serial Port Selection]. 2. Refer to the following table and change the values. SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 99: Pulse Dial / Speed Ratio (Pgm 176)

    Pulse Dial / Speed Ratio (PGM 176) 1-85 Chapter 1: SBX IP Online PC Admin ITEM RANGE DEFAULT REMARK Off-line SMDR / Statistics Print 01-11 COM 1 (01) 01: COM1 02: COM2 - MODU Admin Print 01-11 COM 1 (01)

  • Page 100: Smdr Attributes (Pgm 177)

    SMDR Attributes (PGM 177) 1-86 Chapter 1: SBX IP Online PC Admin SMDR Attributes ( PGM 177) The Station Message Detail Recording (SMDR) will provide details on both incoming and outgoing calls. As an assignable database option, if Long Distance/All Call is selected, incoming and outgoing, local and long distance calls are all provided.
  • Page 101 SMDR Attributes (PGM 177) 1-87 Chapter 1: SBX IP Online PC Admin SMDR Attributes (PGM 177) ITEM RANGE DEFAULT REMARK SMDR Save Enable ON/OFF The system can be set to record either all outgoing calls (ALL) or only limit set by timer in Btn12 (SMDR Start Timer).

  • Page 102: System Date / Time (Pgm 178) - Not Used

    System Date / Time (PGM 178) - Not Used 1-88 Chapter 1: SBX IP Online PC Admin SMDR Attributes (PGM 177) ITEM RANGE DEFAULT REMARK SMDR Long Distance Call 7-15 If the SMDR digits are more than this value, the system Digit Counter considers it as a long distance call.

  • Page 103: Linked Station Pairs Table (Pgm 179)

    Linked Station Pairs Table (PGM 179) 1-89 Chapter 1: SBX IP Online PC Admin Linked Station Pairs Table ( PGM 179) You can link two stations as a pair and it is possible to make up to 24 pairs in the system.

  • Page 104: System Timers I - Iii (Pgm 180, 181,182)

    System Timers I - III (PGM 180, 181,182) 1-90 Chapter 1: SBX IP Online PC Admin System Timers I - I I I ( PGM 180, 181,182) You can set the system timers. You can change the interval of time that each event occurs.
  • Page 105 System Timers I - III (PGM 180, 181,182) 1-91 Chapter 1: SBX IP Online PC Admin System Timers - I (PGM 180) ITEM RANGE DEFAULT REMARK Attendant Recall Timer 00-60 Establishes the amount of time before the system disconnects the call.
  • Page 106 System Timers I - III (PGM 180, 181,182) 1-92 Chapter 1: SBX IP Online PC Admin System Timers - I (PGM 180) ITEM RANGE DEFAULT REMARK ACNR Tone Detect Timer 001-300 This timer is invoked upon completion of dialing and the...
  • Page 107 System Timers I - III (PGM 180, 181,182) 1-93 Chapter 1: SBX IP Online PC Admin System Timers - II (PGM 181) ITEM RANGE DEFAULT REMARK Call Forward No Answer 000-255 The Call forward busy/no answer feature will take place Timer using this timer.
  • Page 108 System Timers I - III (PGM 180, 181,182) 1-94 Chapter 1: SBX IP Online PC Admin System Timers - II (PGM 181) ITEM RANGE DEFAULT REMARK SLT DTMF Release Timer 00-20 (2 digits) (sec) 3 Soft Auto Release Timer 01-30...
  • Page 109 DID Inter Digit Timer 01-20 This timer is used for the DID type 2 feature. In DID type 2, the SBX IP system will wait for new DID digits to be (2 digits) (sec) received until this timer expires or the call routing of DID type 2 is executed.

  • Page 110: In Room Indication (Pgm 183)

    In Room Indication (PGM 183) 1-96 Chapter 1: SBX IP Online PC Admin System Timers - III (PGM 182) ITEM RANGE DEFAULT REMARK FAX Tone Detect Timer 01-10 Establishes the time allowed for a FAX tone to be detected before disconnection.

  • Page 111: Chime Bell Attribute (Pgm 184)

    Chime Bell Attribute (PGM 184) 1-97 Chapter 1: SBX IP Online PC Admin Chime Bell Attribute ( PGM 184) This window assigns Chime Bell attributes. Master and slave are the extension number and relay should be assigned with each bin number. Bell timer and Tone frequency are adapted in common.

  • Page 112: Dcob System Attributes (Pgm 186)

    DCOB System Attributes (PGM 186) 1-98 Chapter 1: SBX IP Online PC Admin DCOB System Attributes ( PGM 186) In this menu, you can program the attributes of R2 (DCOB). These menus consist of combo boxes. Operation 1. Select [DCOB System Attributes]. Current programmed data will display.
  • Page 113 DCOB System Attributes (PGM 186) 1-99 Chapter 1: SBX IP Online PC Admin DCOB System Attributes (PGM 186) ITEM RANGE DEFAULT REMARK DCOB CO Type 0: Sweden/Cyprus (This is actually 1: Italy programmed in PGM187, 2: Korea/Australia BTN4) Metering Type...

  • Page 114: Dcob Co Line Attributes (Pgm187)

    DCOB CO Line Attributes (PGM187) 1-100 Chapter 1: SBX IP Online PC Admin DCOB CO Line Attributes ( PGM187) This feature is for R2(DCOB) programming. DCOB CO Line Attributes (PGM 187) ITEM RANGE DEFAULT REMARK IN Digit Type Default: R2MFC (2)

  • Page 115: Station Group

    Station Group 1-101 Chapter 1: SBX IP Online PC Admin Station Group You can group stations, and allow an idle station in a group to respond to a call. Station Group Assign ( PGM 190/ 191) Stations in the system can be grouped so that incoming calls will search (hunt) for an idle station in the group.
  • Page 116 Station Group Assign (PGM 190/191) 1-102 Chapter 1: SBX IP Online PC Admin SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 117 Station Group Assign (PGM 190/191) 1-103 Chapter 1: SBX IP Online PC Admin You can change the location of a group member using Up/Down key. Then PC Admin will send the changed order of stations to the MPB and the MPB will save with the new order of stations.
  • Page 118 Station Group Assign (PGM 190/191) 1-104 Chapter 1: SBX IP Online PC Admin Circular/Terminal Group Attributes (PGM 191) ITEM RANGE DEFAULT REMARK VMIB Announce 1 Timer 000-999 If this timer expires after a call comes into the group, the system announces the greeting, if one exists.
  • Page 119 Station Group Assign (PGM 190/191) 1-105 Chapter 1: SBX IP Online PC Admin Circular/Terminal Group Attributes (PGM 191) ITEM RANGE DEFAULT REMARK Music Source 0 (not If music source is assigned, calling user will be heard assigned) music instead of ring back tone.
  • Page 120 Station Group Assign (PGM 190/191) 1-106 Chapter 1: SBX IP Online PC Admin UCD Group Attributes (PGM 191) ITEM RANGE DEFAULT REMARK VMIB Announce 00-70 00 (not This location is used to announce greeting when the assigned) VMIB Announce 2 timer expires.
  • Page 121 Station Group Assign (PGM 190/191) 1-107 Chapter 1: SBX IP Online PC Admin UCD Group Attributes (PGM 191) ITEM RANGE DEFAULT REMARK Supervisor Call Count 00-99 If the number of queued calls is more than this call count, the supervisor timer will be started.
  • Page 122 Station Group Assign (PGM 190/191) 1-108 Chapter 1: SBX IP Online PC Admin Ring Group Attributes (PGM 191) ITEM RANGE DEFAULT REMARK VMIB Announce 2 Repeat ON/OFF This is used to enable or disable the VMIB Announce 2 Enable/Disable Repeat.
  • Page 123 Station Group Assign (PGM 190/191) 1-109 Chapter 1: SBX IP Online PC Admin Voice Mail Group Attributes (PGM 191) ITEM RANGE DEFAULT REMARK Wrap-up Timer 002-999 A station in a hunt group is maintained in a busy state for a minimum of six seconds after any call and for hunt group (sec) calls for the assigned wrap-up time.

  • Page 124: Isdn System Base Program

    ISDN System Base Program 1-110 Chapter 1: SBX IP Online PC Admin I SDN System Base Program To change the ISDN related features you use PGM200-PGM202. I SDN Attributes ( PGM 200) You can change the ISDN attributes using this menu.

  • Page 125: Colp Table (Pgm 201)

    COLP Table (PGM 201) 1-111 Chapter 1: SBX IP Online PC Admin COLP Table ( PGM 201) After you make an outgoing call through the ISDN line, you can see the number you are connected with. Operation Click [COLP Table], select a table index, and click the [Update Tool].

  • Page 126: Tables

    Tables 1-112 Chapter 1: SBX IP Online PC Admin Tables LCR Assignment ( PGM 220) LCR is a function you can program to select the least-costly CO line automatically for day/night, and any specified time zone. The LCR table has four parts. In PGM 220, you can program the general database, LCR access mode, day zone, and time zone.

  • Page 127: Lcr Assignment (Pgm 220)

    LCR Assignment (PGM 220) 1-113 Chapter 1: SBX IP Online PC Admin LCR Table (PGM 220) ITEM RANGE DEFAULT REMARK Disable LCR Access Mode 00 (M00): Disable LCR Access M00) LCR Access Mode01 (M01): only Loop LCR. LCR Access Mode02 (M02): Internal and Loop LCR.

  • Page 128: Lcr - Ldt (Leading Digit Table) Table (Pgm 221)

    LCR - LDT (Leading Digit Table) Table (PGM 221) 1-114 Chapter 1: SBX IP Online PC Admin LCR - LDT ( Leading Digit Table) Table ( PGM 221) PGM 221 is the Leading Digit Table. Operation 1. Click the [LCR-LDT Table]. Select an LDT number (0-249).
  • Page 129 LCR - LDT (Leading Digit Table) Table (PGM 221) 1-115 Chapter 1: SBX IP Online PC Admin 3. Select an LCR type (INT, COL, BOTH). 4. Enter Leading Digits (12-digits to compare with a number a user dialed previously). 5. Set up DMT Index with the combo box. You should setup the DMT1 field. Others fields may be left blank.

  • Page 130: Lcr - Dmt Table (Pgm 222)

    LCR - DMT Table (PGM 222) 1-116 Chapter 1: SBX IP Online PC Admin LCR - DMT Table ( PGM 222) PGM 222 is the Digit Modification Table. Operation 1. Click [LCR-DMT Table], and select DMT (0- 99) 2. Click the [Update Tool]. The following dialog box appears 3.
  • Page 131 LCR - DMT Table (PGM 222) 1-117 Chapter 1: SBX IP Online PC Admin 7. CO Group: Select a CO Group. 8. Alternative DMT index: If there is no CO group to select, select alternative DMT index to be used (0-99).

  • Page 132: Lcr Table Initialization (Pgm 223)

    LCR Table Initialization (PGM 223) 1-118 Chapter 1: SBX IP Online PC Admin LCR Table I nitialization ( PGM 223) This feature initializes Day Zone 1, 2, 3 in the LDT and all CO groups in the DMT. Operation 1. Click [LCR Table Initialization]. Click [Day Zone] (1-3). Select DMT index (0-99), and press [Initialize] button to initialize.

  • Page 133: Toll Exception (Pgm 224)

    Toll Exception (PGM 224) 1-119 Chapter 1: SBX IP Online PC Admin Toll Exception ( PGM 224) Toll tables are used to have access to certain toll free calls as well as being denied certain calls for the stations assigned STATION COS. Exception table A & B allow the station that is programmed in STA COS 2, 3, &...
  • Page 134 Toll Exception (PGM 224) 1-120 Chapter 1: SBX IP Online PC Admin Operation Click [Toll Exception Table]. Select table (allow or deny). SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 135: Canned Toll Table (Pgm 225)

    Canned Toll Table (PGM 225) 1-121 Chapter 1: SBX IP Online PC Admin Canned Toll Table ( PGM 225) The Allow/Deny Tables are organized to support 2 different toll plans at one installed site. You can set the Allow/Deny table that is applied to station COS 5, 6. The number of entries in a table is 20 and the entries can be up to 14 digits including any number 0-9, *, #.

  • Page 136: Emergency Code Table (Pgm 226)

    Emergency Code Table (PGM 226) 1-122 Chapter 1: SBX IP Online PC Admin Emergency Code Table ( PGM 226) Regardless of STA COS, an emergency call can be made through a service code. You can make 10 service codes for emergencies.

  • Page 137: Authorization Code Table (Pgm 227)

    Authorization Code Table (PGM 227) 1-123 Chapter 1: SBX IP Online PC Admin Authorization Code Table ( PGM 227) Trunk groups can be marked to deny access until a matched Authorization code is entered. In this case, a DND warning tone is provided when the trunk group access code is dialed. If the dialed Authorization code is verified, you will receive CO dial tone.
  • Page 138 Authorization Code Table (PGM 227) 1-124 Chapter 1: SBX IP Online PC Admin SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 139: Customer Call Routing (Pgm 228)

    Customer Call Routing (PGM 228) 1-125 Chapter 1: SBX IP Online PC Admin Customer Call Routing ( PGM 228) According to voice guidance, an outside caller may be connected to a certain destination, and to hear another voice message by pressing a button on their keyset.
  • Page 140 Customer Call Routing (PGM 228) 1-126 Chapter 1: SBX IP Online PC Admin Customer Call Routing Table (PGM 228) TYPE (DIGIT) TYPE RANGE DEFAULT REMARK Station Station # Hunt Group Hunt # VMIB Announce VMIB DROP Announce System Speed 2000-2499...

  • Page 141: Executive/Secretary Table (Pgm 229)

    Executive/Secretary Table (PGM 229) 1-127 Chapter 1: SBX IP Online PC Admin Executive/ Secretary Table ( PGM 229) There are a number of Executive/Secretary pairs available for assignment so that when the executive-designated station is in a DND state, intercom calls and transfers will be automatically routed to the designated secretary station.

  • Page 142: Flexible Did Table (Pgm 231)

    Flexible DID Table (PGM 231) 1-128 Chapter 1: SBX IP Online PC Admin Flexible DI D Table ( PGM 231) This table is for flexible DID table service. Operation 1. Click [Flexible DID Table]. 2. You can select the range that you want to read. You might have a problem because of a long read operation with a slow connection.
  • Page 143 Flexible DID Table (PGM 231) 1-129 Chapter 1: SBX IP Online PC Admin Flexible DID Table (PGM 231) ITEM RANGE DEFAULT REMARK DID Name 1-11 Chars None Max of 11 characters Day Destination STA # / Sta # Hunt # /...
  • Page 144 Flexible DID Table (PGM 231) 1-130 Chapter 1: SBX IP Online PC Admin Flexible DID Table (PGM 231) ITEM RANGE DEFAULT REMARK Weekend Destination STA # / Sta # Hunt # / VMIB # NULL 00-70 (00: NOT_ASG) VMIB # drop...

  • Page 145: System Speed Zone (Pgm 232)

    System Speed Zone (PGM 232) 1-131 Chapter 1: SBX IP Online PC Admin System Speed Zone ( PGM 232) You can divide system speed dials into 10 zones maximum, and use zones for station COS checking and a status of each station.
  • Page 146 System Speed Zone (PGM 232) 1-132 Chapter 1: SBX IP Online PC Admin "System Speed Zone Editing Window" Flexible DID Table (PGM 232) ITEM RANGE DEFAULT REMARK Speed Bin Range in Zone 2200-2499 Each zone is exclusive (2000 - 2199: Toll Free Zone)

  • Page 147: Weekly Time Table (Pgm 233)

    Weekly Time Table (PGM 233) 1-133 Chapter 1: SBX IP Online PC Admin Weekly Time Table ( PGM 233) You can set day/night/weekend start time for each day. A maximum of six entries are possible. Weekend is after 6 o'clock on Friday.

  • Page 148: Voice-Mail Dialing Table (Pgm 234)

    Voice-Mail Dialing Table (PGM 234) 1-134 Chapter 1: SBX IP Online PC Admin Voice-Mail Dialing Table ( PGM 234) Apply this feature to use voice mail, and signal assignment between two systems. It is recommended that you leave the default values.

  • Page 149: Mobile Extension Table (Pgm 236)

    Mobile Extension Table (PGM 236) 1-135 Chapter 1: SBX IP Online PC Admin Mobile Extension Table ( PGM 236) Mobile Extension Table (PGM 236) ITEM RANGE DEFAULT REMARK Mobile Ext. Table Bin No. 001-048 Mobile Ext. Enable ON/OFF Mobile Ext. CO Grp 1-12 Mobile Ext.

  • Page 150: Local Code Table (Pgm 204)

    Local Code Table (PGM 204) 1-136 Chapter 1: SBX IP Online PC Admin Local Code Table ( PGM 204) You can assign the local codes in this table. The local code entered in this table will be deleted in SMDR print. The telephone number with this code will not be recognized as a long distant call.

  • Page 151: Incoming Cli Destination Table (Pgm 237)

    Incoming CLI Destination Table (PGM 237) 1-137 Chapter 1: SBX IP Online PC Admin I ncoming CLI Destination Table ( PGM 237) An incoming DID destination can be associated with the incoming CLI. If a CLI number is registered and assigned a destination within the Incoming CLI Destination Table, all DID calls with this CLI will be routed to the corresponding destination.

  • Page 152: Voice Mailbox Cos (Pgm238)

    Voice Mailbox COS (PGM238) 1-138 Chapter 1: SBX IP Online PC Admin Voice Mailbox COS ( PGM238) The system provides administrative options to create COS for voice mailboxes. These COS can then be programmed to stations/mailboxes on an individual basis. Up to 5 COS may be programmed.

  • Page 153: Networking Programming

    Networking Programming 1-139 Chapter 1: SBX IP Online PC Admin Netw orking Programming You can program for networking system of the system. The programming number range is from PGM 320 to PGM324. Netw orking Attributes ( PGM 320/ PGM321) Operation 1.
  • Page 154 ON/OFF Enable Networking function Network Retry Count 00-99 No need at direct connection between SBX IP systems. This field is available at connection through the public network. Network CNIP Enable ON/OFF The name of the calling station is sent to the called system between SBX IP systems.

  • Page 155: Networking Co Line Attribute (Pgm 322)

    Networking CO Line Attribute (PGM 322) 1-141 Chapter 1: SBX IP Online PC Admin Netw orking CO Line Attribute ( PGM 322) Operation 1. Click [Networking CO Line Attribute]. Then default setting will be displayed. 2. Click the [Update Tool] to change attributes in popup menu. After changing each field, press the [Update] button to save changes.
  • Page 156 Networking CO Line Attribute (PGM 322) 1-142 Chapter 1: SBX IP Online PC Admin Networking CO Line Attribute (PGM 322) ITEM RANGE DEFAULT REMARK Net CO Group 00-24 Networking CO group programming for Networking call VOIB Mode H.323/SIP This admin program establishes which protocol is used among H.323 or SIP at...

  • Page 157: Networking Basic Attribute (Pgm 324)

    Networking Basic Attribute (PGM 324) 1-143 Chapter 1: SBX IP Online PC Admin Netw orking Basic Attribute ( PGM 324) Operation 1. Click [Networking Numbering Plan Table] 2. Click [Update Tool] to change attributes in popup menu. After changing each field, press [Update] button to save changes.
  • Page 158 Networking Basic Attribute (PGM 324) 1-144 Chapter 1: SBX IP Online PC Admin Network Numbering Plan Table (PGM 324) ITEM RANGE DEFAULT REMARK System Usage NET/PSTN Net Numbering Code 16 digits "*" means any digits can be inserted between 0-9.

  • Page 159: Voib Programming

    VoIB Programming 1-145 Chapter 1: SBX IP Online PC Admin VoI B Programming VoI B Programming ( PGM 340) You can program the VoIB configuration with PC Admin. If you use another application, you may have problems. We recommend that you check the version of the MPB and the PC Admin.

  • Page 160: Gate Keeper Programming (Pgm 341)

    Gate Keeper Programming (PGM 341) 1-146 Chapter 1: SBX IP Online PC Admin Gate Keeper Programming ( PGM 341) You can program the Gate Keeper with this window. Because the GateKeeper is related with the VOIB, this program is included in PGM340 VOIB programming. So, if you select the VOIB slot number, the VOIB and GateKeeper data will be displayed.

  • Page 161: Sip Attributes 1 & 2

    SIP Attributes 1 & 2 1-147 Chapter 1: SBX IP Online PC Admin Operation 1. Select the VOIB board number. If the selected board number is not the VOIB, PC Admin will display an error message. This program is valid only for VOIB.
  • Page 162 SIP Attributes 1 & 2 1-148 Chapter 1: SBX IP Online PC Admin 4. Click on the [Update] button to save your data. 5. Click on the [SIP Attr 2] button. SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 163 SIP Attributes 1 & 2 1-149 Chapter 1: SBX IP Online PC Admin 6. Enter the following as appropriate: • User ID, Authentication User Name, and Authentication User Password can be entered as text data and as a number. The maximum length of these fields is 64 characters.

  • Page 164: Rsg/Ip Phone Programming

    RSG/IP Phone Programming 1-150 Chapter 1: SBX IP Online PC Admin RSG/ I P Phone Programming VOI B Slot Assignment for RSG/ I P Phone ( PGM 380) RSG/ I P Phone Port Number Assignment ( PGM 381) The RSG/IP Phone receives call service through VOIB.
  • Page 165 RSG/IP Phone Port Number Assignment (PGM 381) 1-151 Chapter 1: SBX IP Online PC Admin VOIB Slot Assignment for RSG/IP Phone (PGM 380) ITEM RANGE DEFAULT REMARK VOIB Slot for RSG/IP Phone VOIB slot assignment for RSG/IP Phone RSG/IP Channel Assign...

  • Page 166: Rsg / Ip Phone Attribute (Pgm 382)

    RSG / IP Phone Attribute (PGM 382) 1-152 Chapter 1: SBX IP Online PC Admin RSG / I P Phone Attribute ( PGM 382) The following is how to set the attributes of an RSG/IP Phone. Operation 1. Click [RSG/IP Phone Attribute] 2.

  • Page 167: Ip Phone Attributes (Pgm 386)

    IP Phone Attributes (PGM 386) 1-153 Chapter 1: SBX IP Online PC Admin I P Phone Attributes ( PGM 386) The following is the attributes of RSG. Operation 1. Click [IP Phone Attribute]. Then all data will be read. 2. Select an index that you want to edit and press [Update Tool] in the popup menu.
  • Page 168 IP Phone Attributes (PGM 386) 1-154 Chapter 1: SBX IP Online PC Admin IP Phone Attributes (PGM 386) ITEM RANGE DEFAULT REMARK Set MAC Address 00.00.00.00.00. [*]: A / [#]: B [CB]: C / [MUTE]: D [DND]: E / [FLASH]: F IP Address Display 0.0.0.0...

  • Page 169: Rsg Rx Gain Control (Pgm 396)

    RSG RX Gain Control (PGM 396) 1-155 Chapter 1: SBX IP Online PC Admin RSG RX Gain Control ( PGM 396) The RX gain on the RSG can be adjusted. RSG TX Gain Control ( PGM 397) The TX gain on the RSG can be adjusted.

  • Page 170: Nation Specific

    Nation Specific 1-156 Chapter 1: SBX IP Online PC Admin Nation Specific You can control transfer sensitivity of another station or CO line for each kind of phone (PGM 400 to PGM 423). These values depend on Nation specification. DTI B Rx Gain Control ( PGM 400)

  • Page 171: Modu Rx Gain Control (Pgm 411)

    MODU Rx Gain Control (PGM 411) 1-157 Chapter 1: SBX IP Online PC Admin MODU Rx Gain Control ( PGM 411) Operation Click [All Rx Gain Control] and enter the values of gain control. "N/A" means "not used" with the system, and such fields will not be changed automatically.

  • Page 172: Other Gain Table

    Other Gain Table 1-158 Chapter 1: SBX IP Online PC Admin Other Gain Table Operation 1. Click [Other Gain Table]. 2. Edit each field in the dialog box. In this window, there are 8 PGM features (PGM 412-418 and 424). So, you can edit these fields at one time.

  • Page 173: System Tone Frequency (Pgm 420)

    System Tone Frequency (PGM 420) 1-159 Chapter 1: SBX IP Online PC Admin System Tone Frequency ( PGM 420) A user entered frequency, (dial tone, ring back tone, error tone, busy tone, dummy dial tone), may be changed to the closest system frequency available.

  • Page 174: Differential Ring Frequency (Pgm 421)

    Differential Ring Frequency (PGM 421) 1-160 Chapter 1: SBX IP Online PC Admin Differential Ring Frequency ( PGM 421) A user entered frequency may be changed to the closest system frequency available. Operation Click [Differential Ring Frequency], and select the numbers as desired.

  • Page 175: Distinct Co Ring Frequency (Pgm 422)

    Distinct CO Ring Frequency (PGM 422) 1-161 Chapter 1: SBX IP Online PC Admin Distinct CO Ring Frequency ( PGM 422) A user entered frequency may be changed to the closest system frequency available. Operation Click [Distinct CO Ring Frequency], and select the numbers as desired.

  • Page 176: Acnr Tone Cadence (Pgm 423)

    ACNR Tone Cadence (PGM 423) 1-162 Chapter 1: SBX IP Online PC Admin ACNR Tone Cadence ( PGM 423) A user entered frequency may be changed to the closest system frequency available. Operation 1. Click [ACNR Tone Cadence]. 2. Enter a tone cadence and press [Update] button to save the changes.

  • Page 177: Initialization (Db Init)

    Initialization (DB Init) 1-163 Chapter 1: SBX IP Online PC Admin I nitialization ( DB I nit) The system has been pre-programmed with default data. These features are loaded into memory when the system is initialized. The system should be always initialized when installed or at any time the database has been corrupted.
  • Page 178 Chapter 1: SBX IP Online PC Admin Note: It is recommended that you do not use a USB-Serial converter. It may produce a communication error between the SBX IP and the PC. SBX IP - PC Admin Guide Release 3.5...

  • Page 179: Print Database

    Print Database 1-165 Chapter 1: SBX IP Online PC Admin Print Database To obtain a hard copy printout of the database, a printer must be connected to the RS-232C connector. Print Prot Data ( PGM 451) Operation Click one of the buttons below to get a hard copy.
  • Page 180 Print Prot Data (PGM 451) 1-166 Chapter 1: SBX IP Online PC Admin Print Prot Data (PGM 451) ITEM RANGE DEFAULT REMARK Flexible Numbering Plan Print Station Database Print STA_R CO Line Database Print CO_R System Feature Database Print Station Group Database Print...

  • Page 181: Sbx Ip Offline Pcadminpro

    SBX IP Offline PCAdminPro is a software Administration Program for the SBX IP system which controls the functions and values of the SBX IP system using "*.usr" file downloaded by the DB Up/Download Program indirectly. This DB Up/Download Program is included in the Online PC Admin program package.

  • Page 182: Version Compatibility

    Version Compatibility Chapter 2: SBX IP Offline PCAdminPro Version Compatibility • The Offline PCAdminPro version is not compatible with every MP version. Use the Offline PCAdminPro version compatible with your MP Version. • When you open the user file(*.usr) and the user file is an old version, you will receive a warning message.

  • Page 183: Installation Of The Offline Pcadminpro Software

    Installation of the Offline PCAdminPro Software Chapter 2: SBX IP Offline PCAdminPro I nstallation of the Offline PCAdminPro Softw are 1. Insert CD-ROM to be installed into the CD-ROM Drive of the PC. 2. Double-click "setup.exe". The "Preparing to install" progress window will display If you want to cancel, click the Cancel button.
  • Page 184 Installation of the Offline PCAdminPro Software Chapter 2: SBX IP Offline PCAdminPro The "Customer Information" window will appear. 4. Input your name and your organization. 5. Click the "Next" button. The "Destination Folder" window will appear. 6. Confirm the Current Path Setting or change the path 7.
  • Page 185 Installation of the Offline PCAdminPro Software Chapter 2: SBX IP Offline PCAdminPro The "Installing SBX PCAdminPro" window appears. The "InstallShield Wizard Completed" window appears. 8. To end the Installation process click the "Finish" button. SBX IP - PC Admin Guide Release 3.5...

  • Page 186: Remove Software

    Remove Software Chapter 2: SBX IP Offline PCAdminPro Remove Softw are To remove program: 1. Click Start, point to Settings, click Control Panel, and then click on "Add or Remove Programs". The item can be seen in the "Change or Remove Programs" tab.

  • Page 187: Detail Program Information

    Detail Program Information Chapter 2: SBX IP Offline PCAdminPro Detail Program I nformation Launcher Window SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 188: Sub-Window

    Sub-Window Chapter 2: SBX IP Offline PCAdminPro Sub-Window • Work Space When you select the admin menu, the information window of the admin field will be displayed in this area. • Menu • Load File : You can load file.

  • Page 189: Basic Operation

    Basic Operation Chapter 2: SBX IP Offline PCAdminPro Basic Operation 1. Open File - Open the database file from the "Load File" window. An "Open Complete" message is displayed in the information area. => [Message] Data is loaded to memory successfully.
  • Page 190 Basic Operation 2-10 Chapter 2: SBX IP Offline PCAdminPro 3. View DB - To view information, Click the "Refresh" button. The information is displayed. 4. Update DB - To update the DB, change an attribute value and click the "Update" button. The DB is saved.

  • Page 191: Options Window

    Options Window 2-11 Chapter 2: SBX IP Offline PCAdminPro Options Window You can change the program environment. • Save Memory to File at Shutdown If this box is checked, the File is automatically saved when the program is closed. •...

  • Page 192: Desktop

    Desktop 2-12 Chapter 2: SBX IP Offline PCAdminPro Desktop This feature allows you to save a window’s position and size, and be able to switch between up to 10 saved desktop windows. This icon is at the top menu of the program. Click this icon to popup the desktop function.

  • Page 193: Db File List (Not Used)

    DB File List (Not Used) 2-13 Chapter 2: SBX IP Offline PCAdminPro DB File List ( Not Used) This window shows information about the DB file that is located in the [data] directory. The [data] directory is located in the main folder.

  • Page 194: Pre-Programmed

    Pre-Programmed 2-14 Chapter 2: SBX IP Offline PCAdminPro Pre-Programmed You can change admin values such as Location Information, Slot Assignment, Numbering Plan, etc. Pre-Programmed items are from PGM 100 to PGM 109. Click on "Pre-Programmed" in the Menu List to expand it and then click on a sub-menu item to program the specified function.

  • Page 195: Configuration (Pgm 100-103)

    Configuration (PGM 100-103) 2-15 Chapter 2: SBX IP Offline PCAdminPro Configuration ( PGM 100-103) Location Information (PGM 100) PGM 100 allows you to set up the Nation Code and Customer Site Name. The Name code is the same as the long distance telephone code. The site name is the name of your site. This information will be displayed on the menu title bar.
  • Page 196 For another admin modification, you download the changed database file. Slot Assignment (PGM 101) The SBX IP system supports 10 slots. This program assigns each slot to one type of the boards. After changing the Slot Assignment, you must save the database file and upload it to the SBX IP system and then reset the system.
  • Page 197 Configuration (PGM 100-103) 2-17 Chapter 2: SBX IP Offline PCAdminPro 4. To remove a board, select a slot number belowthe COL board, STA board, or VMIB and click the delete button. SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 198: Numbering Plan Type (Pgm 104/105/106/107/109)

    Numbering Plan Type (PGM 104/105/106/107/109) 2-18 Chapter 2: SBX IP Offline PCAdminPro Numbering Plan Type ( PGM 104/ 105/ 106/ 107/ 109) The default range of station numbers is from 100-147, but 100-131 is the maximum usable at this time. You can change the range according to the nation or your style.
  • Page 199 Numbering Plan Type (PGM 104/105/106/107/109) 2-19 Chapter 2: SBX IP Offline PCAdminPro 2. Right-click with the mouse. Then, the menu item "Make Serial Station Numbers Below" appears. 3. You can set the station number automatically by selecting this menu item.
  • Page 200 Numbering Plan Type (PGM 104/105/106/107/109) 2-20 Chapter 2: SBX IP Offline PCAdminPro ITEM INTERCOM DEFAULT REMARK RANGE Number Set Type 1 100-147 As the basic type, the 1st digit of the station number should be 1-4 Number Set Type 2...

  • Page 201: Ip Setting (Pgm 108)

    The Gateway Address is the IP Address of the gateway that the system uses. If you don't enter the gateway's IP Address, you can't access the SBX IP system from another LAN segment that is separated by a router or a 3-layer switch.

  • Page 202: Station Base Program

    Station Base Program 2-22 Chapter 2: SBX IP Offline PCAdminPro Station Base Program Use Station Base Program to change any station related function. Station Base Program items are from PGM 110 to PGM 130 & 250. When you use station base program items, you must enter the station range.
  • Page 203 Station ID Assignment (PGM 110/111/112/113/114) 2-23 Chapter 2: SBX IP Offline PCAdminPro ‘ SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 204 Station ID Assignment (PGM 110/111/112/113/114) 2-24 Chapter 2: SBX IP Offline PCAdminPro Operation2 - Several Station Attributes update 1. Change the admin field you want in [Figure 4-2] 2. Drag and drop several stations in the Station List (PGM110) to Station Attributes Assignment area 3.
  • Page 205 Station ID Assignment (PGM 110/111/112/113/114) 2-25 Chapter 2: SBX IP Offline PCAdminPro Station Attributes I (PGM111) ITEM RANGE DEFAULT REMARK Auto Speaker ON/OFF Allows accessing a CO line or placing a DSS call by pressing an Selection appropriate {CO} or {DSS} button without lifting the handset or...
  • Page 206 Station ID Assignment (PGM 110/111/112/113/114) 2-26 Chapter 2: SBX IP Offline PCAdminPro Station Attributes I (PGM111) ITEM RANGE DEFAULT REMARK Reserved Reserved Caller Voice Over ON/OFF Caller Voice Over option (ON/OFF) SIP User Bin 00-32 UID table index for SIP outgoing call VOIB make "From"...
  • Page 207 Station ID Assignment (PGM 110/111/112/113/114) 2-27 Chapter 2: SBX IP Offline PCAdminPro Station Attributes II (PGM112) ITEM RANGE DEFAULT REMARK Speed Dial ENABLE/ ENABLE Allows access to system speed dial by the station Access DISABLE Two Way ON/OFF During incoming or outgoing call, user can record the conversation of Record both parties.
  • Page 208 Station ID Assignment (PGM 110/111/112/113/114) 2-28 Chapter 2: SBX IP Offline PCAdminPro Station Attributes III (PGM113) ITEM RANGE DEFAULT REMARK ADMIN ENABLE/ DISABLE ENABLE allows the station to program the Admin Database. This DISABLE feature is available at only DKTUs (STA 100 is Enabled by default).
  • Page 209 Station ID Assignment (PGM 110/111/112/113/114) 2-29 Chapter 2: SBX IP Offline PCAdminPro Station Attributes III (PGM113) ITEM RANGE DEFAULT REMARK Auto Forward ON/OFF to VMIB Station Port ON/OFF If this value is set to ON, the station is blocked and it is impossible to...
  • Page 210 Station ID Assignment (PGM 110/111/112/113/114) 2-30 Chapter 2: SBX IP Offline PCAdminPro ISDN Station Attributes (PGM114) ITEM RANGE DEFAULT REMARK Sub Address This field indicates how the sub-address is used in the SETUP message. 0: Station sub-address not used. 1: Sub-address is filled in the CPN field of SETUP message.

  • Page 211: Flex Buttons Assignment (Pgm 115)

    Flex Buttons Assignment (PGM 115) 2-31 Chapter 2: SBX IP Offline PCAdminPro Flex Buttons Assignment ( PGM 115) This feature is to enable programming flexible buttons and the copy feature (PGM 125). Information for Flex Button Assignment TYPE RANGE REMARK...

  • Page 212: Station Cos (Pgm 116)

    Station COS (PGM 116) 2-32 Chapter 2: SBX IP Offline PCAdminPro Information for Flex Button Assignment TYPE RANGE REMARK {SYS SPD xxxx} 2000-2499 System Speed Bin Num Plan Button Num Plan Code Net DSS Button Net DSS number When using the Networking feature...

  • Page 213: Co Group Access Station (Pgm 117)

    Each station can be assigned to a conference paging zone. You can assign a station in a number of zones or no zone at all. The SBX IP system supports 5 conference paging zones. SBX IP - PC Admin Guide Release 3.5...

  • Page 214: Icm Tenancy Group (Pgm 120)

    ICM Tenancy Group (PGM 120) 2-34 Chapter 2: SBX IP Offline PCAdminPro I CM Tenancy Group ( PGM 120) You may assign a station to an ICM Tenancy Group, and restrict ICM Tenancy Groups from calling each other. Each ICM Tenancy Group can be assigned to a different attendant.

  • Page 215: Preset Call Forward (Pgm 121)

    Preset Call Forward (PGM 121) 2-35 Chapter 2: SBX IP Offline PCAdminPro Preset Call Forw ard ( PGM 121) If a station does not respond to an outside call for a certain period of time, the call may be forwarded to another station.

  • Page 216: Hot/Warm Line Selection (Pgm 122)

    Hot/Warm Line Selection (PGM 122) 2-36 Chapter 2: SBX IP Offline PCAdminPro Hot/ Warm Line Selection ( PGM 122) This feature lets a station perform a pre-assigned feature as soon as lifting handset or pressing the [ON/OFF] button as if a station selects the feature (Hot Line). On the other hand, Idle Line...

  • Page 217: Smdr Account Group (Pgm 124)

    SMDR Account Group (PGM 124) 2-37 Chapter 2: SBX IP Offline PCAdminPro SMDR Account Group ( PGM 124) Stations can be assigned as a member of a call account group on SMDR. A station belongs to only one call account group. The system supports 99 SMDR Account Groups.

  • Page 218: Copy Dss Button (Pgm 125)

    Station I P List for CTI ( PGM126) The SBX IP does not support CTIU for a CTI link. Instead of CTIU, you can make a CTI connection with a LAN connection. To use this feature, you must enter the IP address of the PC's that you want to use with CTI.

  • Page 219: Station Mailbox Attributes (Pgm 127)

    Station Mailbox Attributes (PGM 127) 2-39 Chapter 2: SBX IP Offline PCAdminPro Station Mailbox Attributes ( PGM 127) You can provide a mailbox with administrative options to perform common tasks associated with the VM. This mailbox may also be used to record a broadcast message that is delivered to all mailboxes in the system.

  • Page 220: Virtual Mailbox Attributes (Pgm 129)

    Virtual Mailbox Attributes (PGM 129) 2-40 Chapter 2: SBX IP Offline PCAdminPro Virtual Mailbox Attributes ( PGM 129) You can set up virtual mailboxes which are simply voice mailboxes that do not have a digital, IP, or SLT extension associated with it.

  • Page 221: Display Station With Cos (Pgm 130)

    Display Station with COS (PGM 130) 2-41 Chapter 2: SBX IP Offline PCAdminPro Display Station w ith COS ( PGM 130) This feature is linked to Station COS PGM 116. CO Group Access Station ( PGM 131) This feature is linked Station COS PGM117. Refer to PGM 117 (CO Group Access Display).
  • Page 222 CO Related Admin (PGM 140/141/142/143/146/147) 2-42 Chapter 2: SBX IP Offline PCAdminPro SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 223 CO Related Admin (PGM 140/141/142/143/146/147) 2-43 Chapter 2: SBX IP Offline PCAdminPro Operation2 - Several CO Attributes update 1. Change the admin field(s) you want in the CO Attributes window. 2. Drag and Drop several CO in CO List (PGM140) to the CO Attributes Assignment area.
  • Page 224 CO Related Admin (PGM 140/141/142/143/146/147) 2-44 Chapter 2: SBX IP Offline PCAdminPro CO Service Type (PGM140) ITEM REMARK Normal CO All lines are assigned as normal CO lines by default. Each CO line in the system can be programmed as a DISA (Direct...
  • Page 225 CO Related Admin (PGM 140/141/142/143/146/147) 2-45 Chapter 2: SBX IP Offline PCAdminPro CO Line Attributes I (PGM141) ITEM RANGE DEFAULT REMARK CO Line Type PBX/CO When marked PBX, a 1 or 2 digit dial code may be entered, after which toll restriction is applied.
  • Page 226 CO Related Admin (PGM 140/141/142/143/146/147) 2-46 Chapter 2: SBX IP Offline PCAdminPro CO Line Attributes II (PGM142) ITEM RANGE DEFAULT REMARK Line Drop ON/OFF If this field set to ON, CPT checks the Using CPT incoming CO line when answered and if CPT detects dial tone, then the system drops the line for toll restriction.
  • Page 227 CO Related Admin (PGM 140/141/142/143/146/147) 2-47 Chapter 2: SBX IP Offline PCAdminPro CO Line Attributes II (PGM142) ITEM RANGE DEFAULT REMARK PABX CO YES/NO If R2 PX which does not give us tone for called party status exists, then the system...
  • Page 228 CO Related Admin (PGM 140/141/142/143/146/147) 2-48 Chapter 2: SBX IP Offline PCAdminPro ISDN CO Line Attributes (PGM143) ITEM RANGE DEFAULT REMARK Call Type 0: Unknown 1: International 2: National 3: Not used 4: Subscriber DID Conv 0: convert digits by DID Dgt Conversion...
  • Page 229 CO Related Admin (PGM 140/141/142/143/146/147) 2-49 Chapter 2: SBX IP Offline PCAdminPro CO Line Attributes III (PGM146) ITEM RANGE DEFAULT REMARK Incoming ON/OFF If this value is set to ON, a prefix code will Prefix Code be attached in front of incoming CLI.

  • Page 230: Co Ring Assignment (Pgm 144)

    CO Ring Assignment (PGM 144) 2-50 Chapter 2: SBX IP Offline PCAdminPro CO Ring Assignment ( PGM 144) Each station can be assigned to receive a CO ring for only a certain period of time such as day, night, weekend and On-demand.
  • Page 231 CO Ring Assignment (PGM 144) 2-51 Chapter 2: SBX IP Offline PCAdminPro Operation 1. Select the popup menu you want among the modes of Day, Night, Weekend, and On-demand. 2. Update CO Ring assignment by using "Station Assign" in the popup menu.

  • Page 232: Co Cid Attributes (Pgm 147)

    CO CID Attributes (PGM 147) 2-52 Chapter 2: SBX IP Offline PCAdminPro CO CI D Attributes ( PGM 147) User can assign some attributes related with CID setting. Operation 1. Click [CO CIDU Attribute]. 2. Enter the CO range for which you want to program CID attributes. Then current values will be displayed.

  • Page 233: T1 Co Line Attributes (Pgm 152)

    Use this feature to set North American T1 standards that require the T1 terminating device, in this case the SBX IP system, include various "adjustable" timers and counters. Upon entry into PGM 152, use the dialpad to enter the desired CO line range.

  • Page 234: System Base Program

    System Base Program 2-54 Chapter 2: SBX IP Offline PCAdminPro T1 CO Line Attribute (PGM152) ITEM RANGE DEFAULT REMARK Ring Detection Time (10) The Ring DTC (detect) timer defines the minimum acceptable length of the Ring-on time during a ring cycle.
  • Page 235 System Attributes (PGM 160/161/163) 2-55 Chapter 2: SBX IP Offline PCAdminPro System Attributes I (PGM160) ITEM RANGE DEFAULT REMARK Attendant Call RBT/MOH MOH: The station will present ring back Queuing tone when calling busy attendant station. Ringback RBT: The station will present MOH, hold...
  • Page 236 System Attributes (PGM 160/161/163) 2-56 Chapter 2: SBX IP Offline PCAdminPro System Attributes I (PGM160) ITEM RANGE DEFAULT REMARK Conference ON/OFF When entering a conference, members Warning Tone will receive a warning tone Off-net ON/OFF In case of Off-net call forward, Off-net...
  • Page 237 System Attributes (PGM 160/161/163) 2-57 Chapter 2: SBX IP Offline PCAdminPro System Attributes II (PGM161) ITEM RANGE DEFAULT REMARK Network ON/OFF If this field is ON, the system time/date are Time/Date set by the network time/date. Setting PX Time / Day...
  • Page 238 System Attributes (PGM 160/161/163) 2-58 Chapter 2: SBX IP Offline PCAdminPro System Attributes II (PGM161) ITEM RANGE DEFAULT REMARK Clear ACD ON/OFF Determines if ACD database initializes Database after print-out. after Print VMIB Prompt 00-31 To control prompt gain level...
  • Page 239 ON/OFF Code Usage LCR Dial Tone ON/OFF If this value is set to ON, the SBX IP Detect system first checks if the CO provides dial tone in case an analog CO line is seized for LCR dialing. If there is no dial tone, the call is rerouted to the Alternate DMT index.

  • Page 240: Admin Password (Pgm 162)

    Admin Password (PGM 162) 2-60 Chapter 2: SBX IP Offline PCAdminPro Admin Passw ord ( PGM 162) An Admin password is not assigned by default. Operation Enter 4 digits for the Admin Password. Attendant Assignment ( PGM 164) A maximum of 5 Attendants can be assigned. This includes the Main Attendants and System Attendant.

  • Page 241: Auto Attendant Vmib Annc Assignment (Pgm165)

    Auto Attendant VMIB Annc Assignment (PGM165) 2-61 Chapter 2: SBX IP Offline PCAdminPro Auto Attendant VMI B Annc Assignment ( PGM165) CO-to-CO COS ( PGM 166) When a user of a DID/DISA/TIE line accesses another CO line, CO-to-CO COS is applied. The attributes of CO-to-CO COS are the same as the station COS.

  • Page 242: Did/Disa Destination (Pgm 167)

    DID/DISA Destination (PGM 167) 2-62 Chapter 2: SBX IP Offline PCAdminPro DI D/ DI SA Destination ( PGM 167) A station can be programmed to forward a DID call to the Attendant if the station is busy. Vacant or invalid calls are sent to the Main Attendant, or a busy tone is presented depending on admin programming.
  • Page 243 DID/DISA Destination (PGM 167) 2-63 Chapter 2: SBX IP Offline PCAdminPro SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 244: External Control Contact (Pgm 168)

    External Control Contact (PGM 168) 2-64 Chapter 2: SBX IP Offline PCAdminPro External Control Contact ( PGM 168) Loud Bell Control, Door Open, External Device Control can be set to use an external control contact. The contact feature ranges from 1 to 4 contacts. A default value is not assigned.

  • Page 245: Lcd Date/Time/Language Display Mode (Pgm 169)

    LCD Date/Time/Language Display Mode (PGM 169) 2-65 Chapter 2: SBX IP Offline PCAdminPro LCD Date/ Time/ Language Display Mode ( PGM 169) You can set a different time/date/language for the LCD screen. Operation 1. LCD Time Mode : 12 Hour Mode or 24 Hour Mode.

  • Page 246: Music (Pgm 171)

    Music (PGM 171) 2-66 Chapter 2: SBX IP Offline PCAdminPro Music ( PGM 171) You may assign BGM(Background Music), MOH(Music On Hold), and ICM Box / Doorbox Music Channel. MOH is the music a caller can hear while waiting for his call to be picked up again.
  • Page 247 Music (PGM 171) 2-67 Chapter 2: SBX IP Offline PCAdminPro Operation 1. Click [Music]. 2. Refer to the table below and set the values. ITEM RANGE DEFAULT REMARK BGM Type 00: No BGN 01: Internal Music 02: External Music 03: Reserved...

  • Page 248: Pbx Access Code (Pgm 172)

    PBX Access Code (PGM 172) 2-68 Chapter 2: SBX IP Offline PCAdminPro PBX Access Code ( PGM 172) You can make an outside call through the station. A maximum of 4 PABX Access Codes are assignable. PABX Access Code is a 1- or 3-digit number. By default, PABX Access Codes are not assigned.

  • Page 249: Pla (Preferred Line Answer) Priority (Pgm 173)

    PLA (Preferred Line Answer) Priority (PGM 173) 2-69 Chapter 2: SBX IP Offline PCAdminPro PLA ( Preferred Line Answ er) Priority ( PGM 173) You can set up which order of priority calls are to be received. Operation Each item has the following meaning. Place them in priority order to receive each call by their priority.

  • Page 250: Print Serial Port Selection (Pgm 175)

    Print Serial Port Selection (PGM 175) 2-70 Chapter 2: SBX IP Offline PCAdminPro Print Serial Port Selection ( PGM 175) You can change the usage of the print serial port. You can change the various input ports for applications. Operation Refer to the following table and change the values.

  • Page 251: Pulse Dial / Speed Ratio (Pgm 176)

    Pulse Dial / Speed Ratio (PGM 176). 2-71 Chapter 2: SBX IP Offline PCAdminPro Pulse Dial / Speed Ratio ( PGM 176) If the type of CO line is PULSE instead of DTMF, it decides pulse dial ratio SMDR Attributes ( PGM 177)
  • Page 252 SMDR Attributes (PGM 177) 2-72 Chapter 2: SBX IP Offline PCAdminPro Refer to the following table and enter the desired values. SMDR Attributes (PGM 177) ITEM RANGE DEFAULT REMARK SMDR Save Enable ON/OFF The system can be set to record either all outgoing calls (ALL) or only limit set by timer in Btn12 (SMDR Start Timer).

  • Page 253: System Date / Time (Pgm 178) - Not Used

    System Date / Time (PGM 178) - Not Used 2-73 Chapter 2: SBX IP Offline PCAdminPro SMDR Attributes (PGM 177) ITEM RANGE DEFAULT REMARK SMDR Start Timer 000-250 1 sec base SMDR Hidden Digit Right/ Right Hide digits from right or left...

  • Page 254: Linked Station Pairs Table (Pgm 179)

    Linked Station Pairs Table (PGM 179) 2-74 Chapter 2: SBX IP Offline PCAdminPro Linked Station Pairs Table ( PGM 179) You can link two stations in a pair. The "(M)" character indicate that this station is Master station. SBX IP - PC Admin Guide Release 3.5...
  • Page 255 Linked Station Pairs Table (PGM 179) 2-75 Chapter 2: SBX IP Offline PCAdminPro Operation 1. Select a station number and enter a station number to be linked with. 2. Link the pair by clicking "Add". To delete a pair, click [Delete] button. Then information will display "A"...

  • Page 256: System Timers I - Iii (Pgm 180, 181,182)

    System Timers I - III (PGM 180, 181,182) 2-76 Chapter 2: SBX IP Offline PCAdminPro System Timers I - I I I ( PGM 180, 181,182) You can set the system timers to control the interval of time that each event occurs.
  • Page 257 System Timers I - III (PGM 180, 181,182) 2-77 Chapter 2: SBX IP Offline PCAdminPro System Timers - I (PGM 180) ITEM RANGE DEFAULT REMARK Attendant Recall Timer 00-60 Establishes the amount of time before the system disconnects the call.
  • Page 258 System Timers I - III (PGM 180, 181,182) 2-78 Chapter 2: SBX IP Offline PCAdminPro System Timers - I (PGM 180) ITEM RANGE DEFAULT REMARK ACNR Tone Detect Timer 001-300 This timer is invoked upon completion of dialing and the...
  • Page 259 System Timers I - III (PGM 180, 181,182) 2-79 Chapter 2: SBX IP Offline PCAdminPro System Timers - II (PGM 181) ITEM RANGE DEFAULT REMARK Call Forward No Answer 000-255 The Call forward busy/no answer feature will take place Timer using this timer.
  • Page 260 System Timers I - III (PGM 180, 181,182) 2-80 Chapter 2: SBX IP Offline PCAdminPro System Timers - II (PGM 181) ITEM RANGE DEFAULT REMARK SLT DTMF Release Timer 00-20 (2 digits) (sec) 3 Soft Auto Release Timer 01-30 (2 digits)
  • Page 261 DID Inter Digit Timer 01-20 This timer is used for the DID type 2 feature. In DID type 2, the SBX IP system will wait for new DID digits to be (2 digits) (sec) received until this timer expires or the call routing of DID type 2 is executed.

  • Page 262: In Room Indication (Pgm 183)

    In Room Indication (PGM 183) 2-82 Chapter 2: SBX IP Offline PCAdminPro I n Room I ndication ( PGM 183) Operation 1. Enter a supervisor station. 2. Click the Station List button, then drag and drop member station in the station list.

  • Page 263: Chime Bell Attributes (Pgm 184)

    Chime Bell Attributes (PGM 184) 2-83 Chapter 2: SBX IP Offline PCAdminPro Chime Bell Attributes ( PGM 184) Operation Chime Bell Attributes (PGM 184) ITEM RANGE DEFAULT REMARK Station Pair Station Relay 1-14 Bell Timer 1-20 Bell Frequency SBX IP - PC Admin Guide Release 3.5...

  • Page 264: Dcob System Attributes (Pgm 186)

    DCOB System Attributes (PGM 186) 2-84 Chapter 2: SBX IP Offline PCAdminPro DCOB System Attributes ( PGM 186) In this menu, you can program the attributes of R2(DCOB). These menus consist of combo boxes. Operation After selecting the item and changed value, press the [Update] button to save the value.
  • Page 265 DCOB System Attributes (PGM 186) 2-85 Chapter 2: SBX IP Offline PCAdminPro DCOB System Attributes (PGM 186) ITEM RANGE DEFAULT REMARK R2 Disappear Timer 01-50 (sec) R2 Pulse Timer 01-30 In R2 signaling, time duration to send pulse typed R2...

  • Page 266: Dcob Co Line Attributes (Pgm187)

    DCOB CO Line Attributes (PGM187) 2-86 Chapter 2: SBX IP Offline PCAdminPro DCOB CO Line Attributes ( PGM187) This feature is for R2(DCOB) programming. Operation 1. Set the value of admin field. 2. For several CO modification, click popup menu by right-clicking (as shown in the following graphic).
  • Page 267 DCOB CO Line Attributes (PGM187) 2-87 Chapter 2: SBX IP Offline PCAdminPro DCOB CO Line Attributes (PGM 187) ITEM RANGE DEFAULT REMARK IN Digit Type Default: R2MFC (2) To set type: [0 : PULSE, 1 : DTMF, 2 : R2MFC]...

  • Page 268: Station Group

    Station Group 2-88 Chapter 2: SBX IP Offline PCAdminPro Station Group You can group stations together, and make an idle station in a group to response to a call. Station Group Assign ( PGM 190/ 191) Stations in the system can be grouped so that incoming calls will search (hunt) for an idle station in the group.
  • Page 269 Station Group Assign (PGM 190/191) 2-89 Chapter 2: SBX IP Offline PCAdminPro When assigning a station group to any type of hunt group or voice mail group, ring, pick up group, the system initializes hunt attributes by default value for its own function. It can be programmed to meet each customer's individual need.
  • Page 270 Station Group Assign (PGM 190/191) 2-90 Chapter 2: SBX IP Offline PCAdminPro 4. When the station group type is changed, it will display the default value of the attributes. Then, you can assign the attributes of the group. SBX IP - PC Admin Guide Release 3.5...
  • Page 271 Station Group Assign (PGM 190/191) 2-91 Chapter 2: SBX IP Offline PCAdminPro 5. To modify the member, right-click the mouse in the Group Station Area (The Group Station Area is the white field in below side of the windows). Then, you will see two...
  • Page 272 Station Group Assign (PGM 190/191) 2-92 Chapter 2: SBX IP Offline PCAdminPro 6. To add the member, enter the station range or station number in popup menu by selecting the "Add Station". (If you want to change the order of members, use the up/down button on the right side) SBX IP - PC Admin Guide Release 3.5...
  • Page 273 Station Group Assign (PGM 190/191) 2-93 Chapter 2: SBX IP Offline PCAdminPro SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 274 Station Group Assign (PGM 190/191) 2-94 Chapter 2: SBX IP Offline PCAdminPro 7. To delete the member, select the "Selected item delete" menu. SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 275 Station Group Assign (PGM 190/191) 2-95 Chapter 2: SBX IP Offline PCAdminPro 8. When you complete the modification about the station group, press the "Update" button. SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 276 Station Group Assign (PGM 190/191) 2-96 Chapter 2: SBX IP Offline PCAdminPro 9. To delete the assigned station group, select the Group Type as "N/A" and press the "Type Update" button. Then press the "Update" button. Station Group Type (PGM 190)
  • Page 277 Station Group Assign (PGM 190/191) 2-97 Chapter 2: SBX IP Offline PCAdminPro Circular/Terminal Group Attributes (PGM 191) ITEM RANGE DEFAULT REMARK VMIB Announce 1 Timer 000-999 If this timer expires after a call comes into the group, the system announces the greeting, if one exists.
  • Page 278 Station Group Assign (PGM 190/191) 2-98 Chapter 2: SBX IP Offline PCAdminPro Circular/Terminal Group Attributes (PGM 191) ITEM RANGE DEFAULT REMARK Music Source 0 (not If music source is assigned, calling user will be heard assigned) music instead of ring back tone.
  • Page 279 Station Group Assign (PGM 190/191) 2-99 Chapter 2: SBX IP Offline PCAdminPro UCD Group Attributes (PGM 191) ITEM RANGE DEFAULT REMARK VMIB Announce 00-70 00 (not This location is used to announce greeting when the assigned) VMIB Announce 2 timer expires.
  • Page 280 Station Group Assign (PGM 190/191) 2-100 Chapter 2: SBX IP Offline PCAdminPro UCD Group Attributes (PGM 191) ITEM RANGE DEFAULT REMARK Supervisor Call Count 00-99 If the number of queued calls is more than this call count, the supervisor timer will be started.
  • Page 281 Station Group Assign (PGM 190/191) 2-101 Chapter 2: SBX IP Offline PCAdminPro Ring Group Attributes (PGM 191) ITEM RANGE DEFAULT REMARK Overflow Destination Sta #./ The call to a station in the group will continue to route until answered or each station in the group has been tried. The HUNT #./...
  • Page 282 Station Group Assign (PGM 190/191) 2-102 Chapter 2: SBX IP Offline PCAdminPro Voice Mail Group Attributes (PGM 191) ITEM RANGE DEFAULT REMARK Wrap-up Timer 002-999 A station in a hunt group is maintained in a busy state for a minimum of six seconds after any call and for hunt group (sec) calls for the assigned wrap-up time.

  • Page 283: Isdn System Base Program

    ISDN System Base Program 2-103 Chapter 2: SBX IP Offline PCAdminPro I SDN System Base Program To change the ISDN related features, use PGM 200 - PGM 201. I SDN Attributes ( PGM 200) You can change the general ISDN attributes using this menu.

  • Page 284: Colp Table (Pgm 201)

    COLP Table (PGM 201) 2-104 Chapter 2: SBX IP Offline PCAdminPro COLP Table ( PGM 201) After you make an outgoing call through an ISDN line, you can see the number you are connected with. SBX IP - PC Admin Guide Release 3.5...

  • Page 285: Tables

    Tables 2-105 Chapter 2: SBX IP Offline PCAdminPro Tables LCR Assignment ( PGM 220) LCR is a function you can program to select a least-cost CO line automatically for day/night, and any specified time zone. The LCR table has four parts. In PGM 220, you can program a general database, the LCR access mode, day zone, and time zone.
  • Page 286 LCR Assignment (PGM 220) 2-106 Chapter 2: SBX IP Offline PCAdminPro LCR Table (PGM 220) ITEM RANGE DEFAULT REMARK LCR Access Disable LCR Access Mode 00 (M00): Disable LCR M00) LCR Access Mode01 (M01): only Loop LCR. LCR Access Mode02 (M02): Internal and Loop LCR.

  • Page 287: Lcr - Ldt (Leading Digit Table) Table (Pgm 221)

    LCR - LDT (Leading Digit Table) Table (PGM 221) 2-107 Chapter 2: SBX IP Offline PCAdminPro LCR - LDT ( Leading Digit Table) Table ( PGM 221) PGM 221 is for Leading Digit Table. Operation 1. Select a LCR type (INT, COL, BOTH) 2.

  • Page 288: Lcr - Dmt Table (Pgm 222)

    LCR - DMT Table (PGM 222) 2-108 Chapter 2: SBX IP Offline PCAdminPro Leading Digit Table (PGM 221) ITEM RANGE DEFAULT REMARK 12 digits None To be compared with the dialed digits by a user. DMT Index Each value 00-99...

  • Page 289: Lcr Table Initialization (Pgm 223)

    LCR Table Initialization (PGM 223) 2-109 Chapter 2: SBX IP Offline PCAdminPro 6. Alternative DMT index : If there is no CO group to select, select alternative DMT index to be used.(0-99). Digit Modification Table (PGM 222) ITEM RANGE DEFAULT...

  • Page 290: Toll Exception (Pgm 224)

    Toll Exception (PGM 224) 2-110 Chapter 2: SBX IP Offline PCAdminPro Toll Exception ( PGM 224) Toll tables are used to have access to certain toll-free calls as well as being denied certain calls for the stations assigned STATION COS. Exception table A & B allow the station that is programmed in STA COS 2, 3, &...
  • Page 291 Toll Exception (PGM 224) 2-111 Chapter 2: SBX IP Offline PCAdminPro Operation Click [Toll Exception]. Select table(allow or deny). SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 292: Canned Toll Table (Pgm 225)

    Canned Toll Table (PGM 225) 2-112 Chapter 2: SBX IP Offline PCAdminPro Canned Toll Table ( PGM 225) The Allow/Deny Tables are organized to support 2 different toll plans at one installed site. You can set the Allow/Deny Table which is applied to station COS 5, 6. The number of entries in a table is 20, and 14 digits maximum including any number 0-9, *, #.

  • Page 293: Emergency Code Table (Pgm 226)

    Emergency Code Table (PGM 226) 2-113 Chapter 2: SBX IP Offline PCAdminPro Emergency Code Table ( PGM 226) Regardless of STA COS, an emergency call can be made through a service code. You can make 10 service codes for emergency use.

  • Page 294: Authorization Code Table (Pgm 227)

    Authorization Code Table (PGM 227) 2-114 Chapter 2: SBX IP Offline PCAdminPro Authorization Code Table ( PGM 227) Authorization code table entries consist of each station password and extra account codes. The table entry from 001 to the maximum capacity of station numbers are saved as the password of each station.

  • Page 295: Customer Call Routing (Pgm 228)

    Customer Call Routing (PGM 228) 2-115 Chapter 2: SBX IP Offline PCAdminPro Customer Call Routing ( PGM 228) According to voice guidance, an outside caller may be connected to a certain destination, and hear another voice message by pressing a keyset button.
  • Page 296 Customer Call Routing (PGM 228) 2-116 Chapter 2: SBX IP Offline PCAdminPro Customer Call Routing Table (PGM 228) TYPE (DIGIT) TYPE RANGE DEFAULT REMARK Station Station # Hunt Group Hunt # VMIB Announce VMIB DROP Announce System Speed 2000-2499 Internal Page...

  • Page 297: Executive/Secretary Table (Pgm 229)

    Executive/Secretary Table (PGM 229) 2-117 Chapter 2: SBX IP Offline PCAdminPro Executive/ Secretary Table ( PGM 229) There are a number of Executive/Secretary pairs available for assignment so that when the executive designated station is in DND state, intercom calls and transfers will be automatically routed to the designated secretary station.

  • Page 298: Flexible Did Table (Pgm 231)

    Flexible DID Table (PGM 231) 2-118 Chapter 2: SBX IP Offline PCAdminPro Flexible DI D Table ( PGM 231) This table is for flexible DID table service. Operation Flexible DID Table (PGM 231) ITEM RANGE DEFAULT REMARK DID Name 1-11 Chars...
  • Page 299 Flexible DID Table (PGM 231) 2-119 Chapter 2: SBX IP Offline PCAdminPro Flexible DID Table (PGM 231) ITEM RANGE DEFAULT REMARK Night Destination STA # / Sta # Hunt # / VMIB # NULL 00-70 (00: NOT_ASG) VMIB # drop...

  • Page 300: System Speed Zone (Pgm 232)

    System Speed Zone (PGM 232) 2-120 Chapter 2: SBX IP Offline PCAdminPro System Speed Zone ( PGM 232) You can sort system speed dials by up to 10 zones and use them for station COS checking and a status of each station.

  • Page 301: Weekly Time Table (Pgm 233)

    Weekly Time Table (PGM 233) 2-121 Chapter 2: SBX IP Offline PCAdminPro Weekly Time Table ( PGM 233) You can set day/night/weekend start time for each day. A total of 15 entries are possible. Weekend is after 6 o'clock on Friday.

  • Page 302: Voice-Mail Dialing Table (Pgm 234)

    Voice-Mail Dialing Table (PGM 234) 2-122 Chapter 2: SBX IP Offline PCAdminPro Weekly Time Table (PGM 233) ITEM DEFAULT REMARK Night Night ring mode start time (HH:MM) Weekend Weekend ring mode start time (HH:MM) Voice-Mail Dialing Table ( PGM 234)
  • Page 303 Voice-Mail Dialing Table (PGM 234) 2-123 Chapter 2: SBX IP Offline PCAdminPro Voice Mail Table (PGM 234) DIGIT ITEM DEFAULT REMARK VM Table 5 Prefix: No Answer Table P#*4P Suffix: - VM Table 6 Prefix: Error Table P#*5P Suffix: -...

  • Page 304: Mobile Extension Table (Pgm 236)

    Mobile Extension Table (PGM 236) 2-124 Chapter 2: SBX IP Offline PCAdminPro Mobile Extension Table ( PGM 236) Mobile Extension Table (PGM 236) ITEM RANGE DEFAULT REMARK Mobile Ext. Table Bin No. 001-048 Mobile Ext. Enable ON/OFF Mobile Ext. CO Grp 1-12 Mobile Ext.

  • Page 305: Local Code Table (Pgm 204)

    Local Code Table (PGM 204) 2-125 Chapter 2: SBX IP Offline PCAdminPro Local Code Table ( PGM 204) You can assign the local codes in this table. The local code entered in this table will be deleted in SMDR print. The telephone no. with this code will not be recognized as a long distant call.

  • Page 306: Voib Programing

    VoIB Programing 2-126 Chapter 2: SBX IP Offline PCAdminPro VoI B Programing VoI B Programming ( PGM 340) / Gate Keeper Attributes ( PGM 341) You can program the VoIB configuration/GK Attributes with PC Admin. Operation 1. Select the VoIB board number. If selected board number is not VOIB, the program will display error message.
  • Page 307 SIP Attributes 1 & 2 2-127 Chapter 2: SBX IP Offline PCAdminPro SI P Attributes 1 & 2 SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 308 SIP Attributes 1 & 2 2-128 Chapter 2: SBX IP Offline PCAdminPro Operation A Proxy Server Address can be assigned text data or an IP address. The maximum length of this field is 32 characters. You must enter the proxy server address if you are usinga proxy server in your SIP application.

  • Page 309: Networking Programming

    Networking Programming 2-129 Chapter 2: SBX IP Offline PCAdminPro Netw orking Programming You can program for networking SBX IP systems. The programming number range is from PGM 320 to PGM 324. Netw orking Attributes ( PGM 320/ PGM321) Networking Basic Attribute (PGM 320)
  • Page 310 Networking Attributes (PGM 320/PGM321) 2-130 Chapter 2: SBX IP Offline PCAdminPro Networking Basic Attribute (PGM 320) ITEM RANGE DEFAULT REMARK Net CAS Enable ON/OFF Enable Centralized attendant In master system, CAS should be disabled. Net VPN Enable ON/OFF Enable the VPN function...

  • Page 311: Networking Co Line Attribute (Pgm 322)

    Networking CO Line Attribute (PGM 322) 2-131 Chapter 2: SBX IP Offline PCAdminPro Netw orking CO Line Attribute ( PGM 322) Networking CO Line Attribute (PGM 322) ITEM RANGE DEFAULT REMARK Net CO Group 00-24 Networking CO group programming for...

  • Page 312: Network Numbering Plan Table (Pgm 324)

    Network Numbering Plan Table (PGM 324) 2-132 Chapter 2: SBX IP Offline PCAdminPro Netw ork Numbering Plan Table ( PGM 324) Network Numbering Plan Table (PGM 324) ITEM RANGE DEFAULT REMARK System Usage NET/PSTN Net Numbering Code 16 digits "*" means any digits can be inserted between 0-9.

  • Page 313: Rsg/Ip Phone Programming

    RSG/IP Phone Programming 2-133 Chapter 2: SBX IP Offline PCAdminPro RSG/ I P Phone Programming VOI B Slot Assignment for RSG/ I P Phone ( PGM 380) RSG/ I P Phone Port Number Assignment ( PGM 381) The RSG/IP Phone receives call service through VOIB..

  • Page 314: Rsg / Ip Phone Attribute (Pgm 382)

    RSG / IP Phone Attribute (PGM 382) 2-134 Chapter 2: SBX IP Offline PCAdminPro RSG / I P Phone Attribute ( PGM 382) The following allows you to set the attributes of the RSG/IP Phone. RSG/IP Phone Attributes (PGM 382)

  • Page 315: Ip Phone Attribute (Pgm 386)

    IP Phone Attribute (PGM 386) 2-135 Chapter 2: SBX IP Offline PCAdminPro RSG/IP Phone Attributes (PGM 382) ITEM RANGE DEFAULT REMARK First Access RSG CO ON/OFF If the field is set, the station on RSG can access a CO line on his RSG by dialing the CO Line access code in the 1st available CO group (ex>...
  • Page 316 IP Phone Attribute (PGM 386) 2-136 Chapter 2: SBX IP Offline PCAdminPro IP Phone Attributes (PGM 386) ITEM RANGE DEFAULT REMARK Set MAC Address 00.00.00.00.00. [*]: A / [#]: B [CB]: C / [MUTE]: D [DND]: E / [FLASH]: F IP Address Display 0.0.0.0...

  • Page 317: Rsg Rx Gain Control (Pgm 390/392/394/396)

    RSG RX Gain Control (PGM 390/392/394/396) 2-137 Chapter 2: SBX IP Offline PCAdminPro RSG RX Gain Control ( PGM 390/ 392/ 394/ 396) The RX gain on the RSG can be adjusted. RSG TX Gain Control ( PGM 391/ 393/ 395/ 397) The TX gain on the RSG can be adjusted.

  • Page 318: Nation Specific

    Nation Specific 2-138 Chapter 2: SBX IP Offline PCAdminPro Nation Specific You can control transfer sensitivity of another station or CO line for each kind of phone (PGM 400 to PGM 423). These values depend on Nation Specification. DTI B Rx Gain Control ( PGM 400)
  • Page 319 MODU Rx Gain Control (PGM 411) 2-139 Chapter 2: SBX IP Offline PCAdminPro SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 320: Other Gain Table (Pgm 412-418, Pgm 424)

    Other Gain Table (PGM 412-418, PGM 424) 2-140 Chapter 2: SBX IP Offline PCAdminPro Other Gain Table ( PGM 412-418, PGM 424) SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 321: System Tone Frequency (Pgm 420)

    System Tone Frequency (PGM 420) 2-141 Chapter 2: SBX IP Offline PCAdminPro System Tone Frequency ( PGM 420) User entered frequency (dial tone, ring back tone, error tone, busy tone, dummy dial tone) may be changed to the closest system frequency provided.

  • Page 322: Differential Ring Frequency (Pgm 421)

    Differential Ring Frequency (PGM 421) 2-142 Chapter 2: SBX IP Offline PCAdminPro Differential Ring Frequency ( PGM 421) User entered frequency may be changed to the closest system frequency provided. Differential Ring Frequency (PGM 421) ITEM RANGE DEFAULT REMARK Ring 1...

  • Page 323: Distinct Co Ring Frequency (Pgm 422)

    Distinct CO Ring Frequency (PGM 422) 2-143 Chapter 2: SBX IP Offline PCAdminPro Distinct CO Ring Frequency ( PGM 422) User entered frequency may be changed to the closest system frequency provided. Distinct Ring Frequency (PGM 422) ITEM RANGE DEFAULT...

  • Page 324: Acnr Tone Cadence (Pgm 423)

    ACNR Tone Cadence (PGM 423) 2-144 Chapter 2: SBX IP Offline PCAdminPro ACNR Tone Cadence ( PGM 423) User entered frequency may be changed to the closest system frequency provided ACNR Tone Cadence (PGM 423) ITEM RANGE DEFAULT REMARK Ring-Back Tone...

  • Page 325: Speed Editor

    PC and the SBX IP system. Hardw are Configuration To use a LAN connection between a PC and the SBX IP system, the PC and the SBX IP system should be connected to the local network. SBX IP - PC Admin Guide Release 3.5...

  • Page 326: Installing & Unstalling Software

    For information on installing Windows, refer to the appropriate user's manual. To Uninstall the Speed Editor program: Click Uninstall - Speed Editor or you can also select Speed Editor in Add/Remove Programs in the Control Panel. Full Screen Layout SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 327: File Menu

    4. Click the [OK] button. Open File sub-menu 1. Select [Open File] sub-menu in [File] menu. => [Open] Dialog displays. 2. Select the file type: text, doc, or Excel. 3. Click the [OK] button. SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 328: Connection Menu

    1. Select [Connect] sub-menu in [Connection] menu. => [Login] Dialog displays. 2. If your PC is connected to the SBX IP system by a LAN, select [LAN Port Connect]. For the LAN connection between the PC and the SBX IP system, there must be a physical connection with 10BaseT Cable to local network and the SBX IP system and PC must have valid IP addresses.
  • Page 329 TCP/IP will be not available. • If you want to connect the the SBX IP system that is used in remote site, you may need help from the network administrator. Because many site uses the firewall/NAT/PAT in their router, to connect the system through the Internet, help will be needed.

  • Page 330: File Transfer Menu

    File Transfer Menu Chapter 3: Speed Editor File Transfer Menu When Speed Editor is logged onto the SBX IP System, do not use a keyset for editing speed bin data. Recommendation: When speed editor accesses network drives, opening and saving files can fail due to the network condition.
  • Page 331 3. Select a Range. If you select User Specified, enter the range manually in the boxes below. the User Specified radio button 4. Select [Browse], and name a file you want the speed data to be saved. 5. Click [OK] button to start download. SBX IP - PC Admin Guide Release 3.5 June 2010...

  • Page 332: Editing Data

    SBX IP 1-12 1-24 Index number in Networking PGM 324 (00-72) You must enter the index number in networking PGM 324 (00-72). Otherwise the SBX IP system may not work properly. SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 333 CO and Line, between CO and Group. Do not exceed 16 characters when entering the Speed Name. Do not exceed 24 characters when entering the Phone Number Recommend editing in Speed Editor View. SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 334 Otherwise, Speed Editor cannot convert your data from an Excel file to edit window. Do not exceed 16 characters when entering the Speed Name. Do not exceed 24 characters when entering the Phone Number. Recommend editing in Speed Editor View. SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 335 CO Group Access Station (PGM 131) 1-49 Distinct CO Ring Frequency (PGM 422) 1-161, CO Line Base Program 1-50, 2-41 2-143 COLP Table (PGM 201) 1-111, 2-104 DTIB Rx Gain Control (PGM 400) 1-156, 2-138 SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 336 Initialization (DB Init) 1-163 2-124 In Room Indication (PGM 183) 1-96, 2-82 Modem (PGM 170) 1-76, 2-65 Installation of the Offline PC Admin Software MODU Rx Gain Control (PGM 411) 1-157, 2-138 SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 337 Print Serial Port Selection (PGM 175) 1-83, Full Screen Layout 2-70 Hardware Configuration Hardware/Software Requirements Procedure for using Offline PC Admin Installing Software Pulse Dial / Speed Ratio (PGM 176) 1-85, 2-71 Introduction Uninstalling Software SBX IP - PC Admin Guide Release 3.5 June 2010...
  • Page 338 1-112, 2-105 Tip for backup and restore of user database 1-10 Tip for backup level database Toll Exception (PGM 224) 1-119, 2-110 Tx/Rx LED User Management - Administrator Only 1-10 SBX IP - PC Admin Guide Release 3.5 June 2010...

Table of Contents