Emerson Lumity Wireless Touchscreen RTU Thermostat Quick Start Manual

Table of Contents

Download this manual

Lumity Wireless Touchscreen RTU

Thermostat

Quick Start Guide

General Information

Use the following credentials to access the Web Interface:

Username: admin

Password: admin

This password is only valid for a first-time connection and you will be prompted to change it after your first login.

Please ensure note down the changed password.

Locating the Default Network Configurations on the Lumity Wireless Touchscreen RTU

Thermostat (Home > About)

Document Part # 026-4859 Rev 0

Visit our website at www.climate.emerson.com for the latest technical documentation and updates.

Figure 1 - Home Page

Page 1 of 3

Table of Contents

Do you have a question about the Lumity Wireless Touchscreen RTU Thermostat and is the answer not in the manual?

Page 1 Figure 1 - Home Page Document Part # 026-4859 Rev 0 Page 1 of 3 ©2021 Emerson Digital Cold Chain, Inc. This document may be photocopied for personal use. Visit our website at www.climate.emerson.com for the latest technical documentation and updates.
Page 2 Wi-Fi Configuration. Connection Procedures CAUTION! Follow these simple steps to get started with the Lumity Wireless Touchscreen RTU Thermostat: The thermostat cannot provide an IP address on its own when connecting the controller to an Ethernet port, you must connect it to a router that will act as a DHCP server to provide the controller with an IP address for the initial connection and configuration.
Page 3 The contents of this publication are presented for informational purposes only and they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. Emerson reserves the right to modify the designs or specifications of such products at any time without notice. Responsibility for...