Download Print this page

Advertisement

Quick Links

DELUX Portable Bar Manual
IMPORTANT: Warnings and Cautions
Metal edges and corners could be sharp. One should use protection gloves while manipulating the bar or any metal parts.
Also, avoid wearing new clothes or jewelry while assembling/disassembling/moving the bar.
Some parts can be too heavy or too large to be lifted and carried by one person alone. If unsure about your ability to lift
and manipulate a part by yourself, ask for others' help. Avoid lifting and manipulating the bar parts in proximity to
children or pets.
Place the bar in a safe place to avoid accidents.
Although the bar and lighting are made to resist to unexpected spills and rain, keep the bar top, controller, and electric
connections safe from direct spill, water, and rain.
Important Warranty Information
BEST portable bars come with a limited warranty of one year after the date of purchase against manufacturing defects.
Damages resulting from shipping, handling, misuse, bad maintenance, negligence, or any other factor that cannot be
controlled by Avec Flair Bar Solutions Inc. are not covered by this warranty.
Maintenance Information
Although the DELUX bar is made of food-grade type 304 stainless steel, which is very resistant to rust, it is recommended
to always keep it as clean and dry as possible, both when used and in storage. Avoid long exposure to citrus juice, salt
water, and other rust activators.
For cleaning purposes, we recommend using white vinegar. If you are going to use commercial detergents, use products
specifically made for stainless steel. Other commonly known and widely available products that you may use are Windex,
Extra Virgin Olive Oil, and Baby Oil. Always use a soft cotton cloth to clean a stainless steel surface.
To eliminate scratches, try brushing the scratched area with steel wool. Brush gently in the direction of the grain.
Page 1 of 9

Advertisement

loading
Need help?

Need help?

Do you have a question about the DELUX and is the answer not in the manual?

Questions and answers

Summary of Contents for Best DELUX

  • Page 1 Maintenance Information Although the DELUX bar is made of food-grade type 304 stainless steel, which is very resistant to rust, it is recommended to always keep it as clean and dry as possible, both when used and in storage. Avoid long exposure to citrus juice, salt water, and other rust activators.
  • Page 2 How to Set Up the DELUX Not fond of assembly instructions? There’s also a simple video showing how to assemble the DELUX bar on our website at https://bestportablebars.com/product/delux-portable-bar/ 1. Remove lock pins (Picture 1a) and open both sides of the bar all the way to a 90-degree angle (Picture 1b).
  • Page 3 2. Always put the lock pins back in place with the clips on to reduce the risk of losing them. When you do, make sure to always insert the straight side of the clip into the lock pin’s hole (Picture 2). The clip could be difficult to remove if the curved side is inserted.
  • Page 4 Picture 3b. Secure shelf into the inserts, then slide it all the way to the back of the bar. 4. If you purchased the DELUX model with integrated sink or ice bin (Picture 4), gently drop it in the shelf hole.
  • Page 5 5. Install the Speed Rail. Insert the fixed screws on both sides of the frame into the slots on both sides of the speed rail (Picture 5). Proceed with one side at a time. Make sure they are both secure and all the way in.
  • Page 6 Picture 6b. Tabs inside the bar top’s bottom edge. Picture 6c. Lift the top up on the frame until you reach the tabs, then rotate the top toward a flat position while keeping the tabs inside the top. Page 6 of 9...
  • Page 7 Picture 6d. Align the structure’s sides with the Smart Positioning Guides. Picture 6e. Once the bar top is installed, the tabs should be inside. Page 7 of 9...
  • Page 8 The following steps are for the 3D holographic lighting system. If your DELUX doesn’t have the lights option, you’re already done. It’s time to start serving drinks! 7. Plug in the lights. Pass the adapter’s cable through the hole on the side of the shelf, pull it to the front of the bar, and plug it into the short cable coming out of the bar top (Picture 7a).
  • Page 9: Using The Remote Control

    8. Turn on the lights. The front lights (on/off, color selection, brightness, transition mode, and speed) are controlled with the remote control. There’s a support for it inside the bar (Picture 8a). There are also lights inside the bar to make it easier to work when it’s dark. They are white LED, controlled by a dimmer hidden underneath the top (Picture 8b).