Advertisement
Table of Contents
Advertisement
Table of Contents
Summary of Contents for AMG 770-405
- Page 1 770-405 Instruction Manual Blow molded Transfer Bench...
- Page 2 Please read carefully before use • Examine the product for shipping damage. Do not use the product if there is apparent damage. Please contact your dealer for repair and / or return information. • Verify that all screws and bolts are tightly secured. Assembly instructions 1.Snap the armrest into position, making sure the side buttons pass through armrest holes.
- Page 3 2.Determine on which side of the unit you want to install the backrest. Make sure the unit will be facing the faucets with the armrest on the inside of the bathtub (See Fig. 1) 3.To install the seat and backrest assembly, place the front seat z-clamps under the front frame support tube.
- Page 4 8.To remove the seat and backrest assembly from the unit, lift the back portion of the seat while holding the frame firmly in place. This will disengage the rear seat clips from the frame tube. CAUTION: When lifting the seat off the frame, always pull the metal tube and not the seat / backrest pads.
- Page 5 Maintenance 1.We recommend that you regularly verify that all bolts and screws are properly tightened. 2.Clean the pads with soap and water or mild liquid householder cleaners. Avoid the use of harsh cleaning solvents, such as acetone, which may attack the plastic parts.
Need help?
Do you have a question about the 770-405 and is the answer not in the manual?
Questions and answers