saco Hotpoint LSTB 4B00 Operating Instructions

Operating Instructions - Dishwasher Hotpoint LSTB 4B00
Control panel
Loading the dishwasher
Before loading the racks remove all food residues, arrange the crockery so that it is held in place firmly and doesn't tip
over.
Program table
Detergent
The detergent dispenser must be refilled at the start of each wash cycle.
• Open the detergent dispenser cap using button D and place the detergent inside compartment A. Shut the
detergent dispenser cap.
• During the washing cycle the dispenser will be opened automatically.
Starting a wash program
1. Load the dishwasher.
2. Add detergent
3. Turn the appliance on by using the ON/OFF button.
4. Select the required wash cycle by pressing the P button.
5. Start the wash cycle by firmly closing the door. The washing will start after a
few seconds.
Changing the wash program
To change the program after it has just begun, open the door and press the ON/OFF button. Switch the machine back
on by pressing the ON/OFF button and select a new program. When the door is closed the dishwasher will start the
cycle.