Osd Menu And Operation Menu Introduction - qian.mx MOD. QM201901 User Manual

3. Operation

3.2 OSD MENU AND OPERATION MENU INTRODUCTION

3.1 Power on-off switch
This key is digital control, which is used to activate or deactivate the display power
supply.
3.2 Light Indicator
When the monitor is operating normally, the indicator light looks green (or blue);
When the monitor is under power saving, the indicator light turns red or dies out,
when it is turned off, the indicator light goes out, but the adapter continues on, for
safety the power supply of the adapter must be cut off.
3.3 FUNCTION KEYS
3.3.1 AUTO / SELECT key
With VGA mode: Without Display menu, this key is used for automatic adjustment,
under the display menu, this key is used as confirmation. In VGA + HDMI mode, this
key is used to select between the VGA and HDMI signal.
3.3.2 + / - > / < key
In OSD menu, these two keys are used for scan and select menus from left or right
to adjust the volume. If the monitor does not have an audio signal, the - / <keys can
be used as brightness shortcut keys, if the monitor has an audio signal, +/- or> / <will
be used to adjust the volume.
3.3.3 MENU key
Menu key, used to enter the menu and exit the menu
3.4 OSD MENU
3.4.1 MAIN MENU
Item:
1. Color adjustment; 2. Image adjustment; 3. Auto adjustment;
4. Adjustment Element; 5. Others; 6. Exit.
3.4.2 Submenu
Item:
1. Brightness
2. Contrast ratio
3. Automatic image adjustment
4. Automatic color adjustment,
5. Color temperature
6. Red 7. Green 8. Blue 9. Aspect ratio
10. H position 11. V position 12 Clock 13. Phase 14. Language
15. Position menu H
16. Position menu V
17. OSD Timer
18. Reset.
33