Thread Take-Up Spring Adjustment - Singer 191D-20 Instruction Manual

3.12
Thread
Take-Up Spring
Adjustment
Downloaded from ManualsNet.com
The adjustment of the stroke of the
thread take-up spring (Figure 18)
Loosen setting screw '2'.
Turn the thread tension post '3'
clockwise (in direction 'A'), the
stroke of the thread take-up spring
will be increased.
Turn the thread tension post '3'
counter-clockwise (in direction 'B'),
the stroke of the thread take-up
spring will be decreased.
Adjusting the pressure of the thread
take-up spring '1' (Figure 19)
Loosen setting screw '2' and take
out thread tension assembly '5'.
search engine
Figure 18
High Speed Straight Lockstitch Sewing Machine
Loosen setting screw '4' and turn
the tension post '3'.
Turn the tension post '3' clockwise
(in direction 'A'), the pressure of the
spring will be increased.
Turn the tension post '3' coun-
ter clockwise (in direction 'B'), the
pressure will be decreased.
• Usually, the thread take-up spring
'1' has been properly adjusted be-
fore leaving the factory.
• Only when sewing special clothes
or using special thread is readjust-
ment necessary.
Figure 19
| Instruction Manual and Parts List
13