ZEITRAUM RAIL Snack Assembly Instructions

RAIL Snack
tabletop up to 90x90 cm
Assembly instructions 07/ 2022
TOOLS:
Allen key SW 5 (enclosed)
6x XS steel dowels (M6)
8x XS steel dowels (M8)
14x connector housings
14x grub screws
1x cylinder head screw (M8x60) with flat washer
1x dowel (8x30)
1. Screw in the XS steel dowels (M8).
4. Tighten the grub screws on both sides of the
block.
7. Position the legs on the tabletop.
ZEITRAUM GmbH Äußere Münchner Straße 2
•
Please assemble the table on a soft surface (e.g. a carpet or blanket) to avoid damages.
2. Insert the connector housings
5. For the lower cross, screw in the XS
steel dowels (M6) and insert the connector
housings. Join the parts and tighten the grub
screws.
8. Insert the cylinder head screw with the
flat washer.
D-82515 Wolfratshausen Tel + 49 (0) 8171 – 418130
• •
Video:
http://www.scheulenburg-direkt.de/index.php?page=content&coID=11
3. Join a leg with the mounting block.
6. Mount the cross to the leg. Afterwards, mount the
remaining legs. Assembly is easier when the table is
upside down.
9. Tighten the screw.
Fax + 49 (0) 8171 – 418141 info@zeitraum-moebel.de
• •
www.zeitraum-moebel.de
•