Advertisement
BULUCUT-6
AUTOMATIC& MANUAL METALLOGRAPHIC SPECIMEN
CUTTING MACHINE
BMS Bulut Makina Sanayi ve Ticaret Ltd. Şti.
Kocaeli KOBİ Organize Sanayi Bölgesi
Köseler Mahallesi, 6.Cadde No: 20/2 Dilovası / KOCAELİ / TURKEY
Phone: +90 262 502 97 73-76 / +90 262 503 06 51
Web:
www.bulutmak.com
e-mail:
bms@bulutmak.com
Advertisement
Table of Contents
Related Manuals for Bms Bulut Makina BULUCUT-6
Summary of Contents for Bms Bulut Makina BULUCUT-6
- Page 1 BULUCUT-6 AUTOMATIC& MANUAL METALLOGRAPHIC SPECIMEN CUTTING MACHINE BMS Bulut Makina Sanayi ve Ticaret Ltd. Şti. Kocaeli KOBİ Organize Sanayi Bölgesi Köseler Mahallesi, 6.Cadde No: 20/2 Dilovası / KOCAELİ / TURKEY Phone: +90 262 502 97 73-76 / +90 262 503 06 51 Web: www.bulutmak.com...
- Page 2 CAUTIONS & SAFETY NOTE ............................... 3 1. Descriptions ................................... 4 2. Technical parameter ................................4 3. Method 1： .................................... 4 4. Method 2：Automatic cutting specimen ..........................5 5. Method 3：Cutting the specimen manually .......................... 5 6. Maintenance and safety notes: ............................... 5 Cautions: ....................................
- Page 3 CAUTIONS & SAFETY NOTE Following instruction shall be followed to prevent from fire hazard, electric shock and injury ： Read carefully all the operation instructions. Keep in mind the elementary knowledge of electrical appliances. Abide by all the warnings and instructions either marked on the product or mentioned in the documents delivered with the machine Should any discrepancy be found between the instructions and safety note, the safety note shall prevail .For more detail, please refer to the sales agency or aftermarket service.
- Page 4 1. Descriptions The cutting machine BULUCUT-6 is composed of the frame, electric box, cutting chamber, motor, cooling system, cutting abrasive chip, etc. It not only can cut those round bars under the diameter of 80mm, but also can cut rectangular specimens ranging within 80mm height to 200mm depth .The built –in cooling system could help to prevent burning the tissue due to...
- Page 5 4. Method 2：Automatic cutting specimen 1) Fix the specimen between the anvils of cutting chamber to pinching screw on the “L” tongs and clamp the specimen with hand, and retighten the screw. 2) Select cutting speed. Turn on the power switch and choose right speed by pressing the cutting speed setting button until the LCD indicates the selected speed.
Need help?
Do you have a question about the BULUCUT-6 and is the answer not in the manual?
Questions and answers