BEST BUY essentials BE-MQP10W22K Quick Setup Manual

10-Watt Wireless
Charging Pad
Quick Setup Guide
BE-MQP10W22K /
BE-MQP10W22K-C
v1
R2
FLAT SIZE W×H): 9 × 5 in. (228.6 × 127 mm)
FINAL FOLDED SIZE: 3 × 5 in. (76.2 × 127 mm)
Before using your new product, please read these instructions to prevent any damage.
Package contents
• 10 W Qi Certified Wireless Charging Pad
• 4 ft. (1.2 m) charging cable
• Quick Setup Guide
Compatibility
Any Qi-enabled devices up to 10 W, including smartphones,
headphones, smart watches. This includes the latest iPhone,
Samsung Galaxy, and Note devices.
Features
• 10 W output provides high-speed charging to Qi-compatible
devices
• Low-profile design for easy placement and reliable charging
• Wireless design charges devices without cumbersome cords
• LED indicator shows that your device is charging
Product overview
LED indicator
LED indicator status
LED STATUS
Pulsing blue Standby
Solid blue Charging
Solid purple Quick charging
Solid red Insufficient input power
Blinking red Charging error
Using your charging pad
1 Connect the charging cable to your charging pad.
2 Plug the other end of the cable into a USB port on a computer
or into a power adapter.
Choosing the right USB power adapter:
• A QC 2.0 or QC 3.0 charger is required to obtain the full 10 W of
wireless charging performance.
• A minimum of a 5 V/2 A (10 Watt) USB charger or powered USB
port is required to obtain 5 W of wireless charging performance.
• Using low-power USB ports (with less than 5 V/2 A of power
output) could cause poor performance or cause the wireless
Micro USB port
charger not to operate at all.
3 Place your Qi-enabled device on the center of your charging
pad with the screen facing up. The LED is
your device is charging.
Note: If the LED is red, your device is not charging.
See "TROUBLESHOOTING" for more information
Charging cable
blue/purple when
.