Advertisement
Quick Links
396-4507Y1
QuickDraw Lite
Operator's Manual
It is the responsibility of the operator to read and understand
this manual for the safe operation of the QuickDraw.
The operator must follow all safety precautions from the
label of all products being used.
396-4507Y1 QuickDraw Lite Operator's Manual
Revised 04/28/2022
© 2022 SurePoint Ag Systems Inc.
Advertisement
Related Manuals for SurePoint QuickDraw Lite
Summary of Contents for SurePoint QuickDraw Lite
- Page 1 It is the responsibility of the operator to read and understand this manual for the safe operation of the QuickDraw. The operator must follow all safety precautions from the label of all products being used. 396-4507Y1 QuickDraw Lite Operator’s Manual Revised 04/28/2022 © 2022 SurePoint Ag Systems Inc.
- Page 2 QuickDraw Lite - Venturi w/ 6 Manual Valves (Oval Gear Meter) 604-025300 QuickDraw Lite - Suction Side w/ 3 Manual & 3 Auto Valves (Oval Gear Meter) 604-025310 QuickDraw Lite - Venturi w/ 3 Manual & 3 Auto Valves (Oval Gear Meter)
- Page 3 QuickDraw Lite - Basic System Dimensions 396-4507Y1 QuickDraw Lite Operator’s Manual Revised 04/28/2022 © 2022 SurePoint Ag Systems Inc.
- Page 4 Chemical Flow Measuring Technology - Gear Meter The QuickDraw Lite can be purchased with a Gear Meter instead of the Mass Meter. The Gear Meter pro- vides very accurate measurement of the chemical products. The Gear Meter must be used with a strainer to be sure no particles get into the finely machined gear mechanism.
- Page 5 QuickDraw Lite Operation - Run Page (Manual Products) From the MENU screen you can access the other controller screens. WARNINGS/ALARMS will provide a list of all active warnings alarms with the system. Push these buttons in order to see what alarms and warnings are active.
- Page 6 QuickDraw Lite Operation - Automatic Products AUTO PRODUCTS allows the user to set the desired amount of product prior to the batch. Manually starting each product is still required. Enter the SETPOINT for the amount of each product in the batch.
- Page 7 If it is necessary to replace a valve, use the buttons on the right to address the new valve. Follow the screen prompt for addressing the new valve or all valves. 396-4507Y1 QuickDraw Lite Operator’s Manual Revised 04/28/2022 © 2022 SurePoint Ag Systems Inc.
- Page 8 Mass Flow meter settings, press the location indicated by the star. This should be done at time of manufacturing, however, some software updates may reset defaults to Mass Flow meter and it is necessary to access this page. See next page for setup. 396-4507Y1 QuickDraw Lite Operator’s Manual Revised 04/28/2022 © 2022 SurePoint Ag Systems Inc.
- Page 9 Only in very rare cases or for troubleshooting is it necessary to access this screen. For use with a gear meter, select “Pulse Meter” on the drop down menu. It is not recommended at any time to Reset Factory Defaults unless instructed by SurePoint Ag Systems service team. ...
-
Page 10: Alarms And Warnings
WARNINGS will NOT stop a batch, but should be checked to prevent a problem. ALARMS will prevent a batch from running and must be resolved before continuing. 396-4507Y1 QuickDraw Lite Operator’s Manual Revised 04/28/2022 © 2022 SurePoint Ag Systems Inc. - Page 11 Running a Batch with QuickDraw Lite Calculate the amount of each product that will be needed in the batch. Products can be loaded in any order. Open the carrier flow valve for preloading and for finishing the batch with carrier.
- Page 12 396-4507Y1 QuickDraw Lite Operator’s Manual Revised 04/28/2022 © 2022 SurePoint Ag Systems Inc.
- Page 13 396-4507Y1 QuickDraw Lite Operator’s Manual Revised 04/28/2022 © 2022 SurePoint Ag Systems Inc.
- Page 14 396-4507Y1 QuickDraw Lite Operator’s Manual Revised 04/28/2022 © 2022 SurePoint Ag Systems Inc.
Need help?
Do you have a question about the QuickDraw Lite and is the answer not in the manual?
Questions and answers